AON2290 100V N-Channel MOSFET General Description Product Summary The AON2290 combines advanced trench MOSFET technology with a low resistance package to provide extremely low RDS(ON). This device is ideal for load switch and battery protection applications. ID (at VGS=10V) 100V 4.5A RDS(ON) (at VGS =10V) < 72m RDS(ON) (at VGS =4.5V) < 97m VDS D DFN 2x2B Top View S Bottom View D D D Pin 1 S G D G Pin 1 D S Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS VGS Gate-Source Voltage TA=25C Continuous Drain Current Pulsed Drain Current C Power Dissipation Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case Rev.2.0: April 2013 Steady-State Steady-State A 2.8 W 1.8 TJ, TSTG Symbol t 10s V 25 PD TA=70C 20 3.5 IDM TA=25C A Units V 4.5 ID TA=70C Maximum 100 RJA RJC www.aosmd.com -55 to 150 Typ 37 66 6.5 C Max 45 80 8.0 Units C/W C/W C/W Page 1 of 6 AON2290 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current Conditions Min ID=250A, VGS=0V 100 1 TJ=55C Gate-Body leakage current VDS=0V, VGS=20V Gate Threshold Voltage VDS=VGS, ID=250A 1.7 ID(ON) On state drain current VGS=10V, VDS=5V 25 100 nA 2.3 2.8 V 59 72 110 134 VGS=4.5V, ID=4A 77 97 m 13 1 V 3.5 A VGS=10V, ID=4.5A Static Drain-Source On-Resistance TJ=125C gFS Forward Transconductance VDS=5V, ID=4.5A VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current DYNAMIC PARAMETERS Input Capacitance Ciss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance Total Gate Charge Qgs Gate Source Charge Qgd Gate Drain Charge tD(on) Turn-On DelayTime tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Body Diode Reverse Recovery Time Qrr A 0.78 m S 415 pF VGS=0V, VDS=50V, f=1MHz 32 pF 3 pF VGS=0V, VDS=0V, f=1MHz 1.4 SWITCHING PARAMETERS Qg Total Gate Charge Qg Units A 5 VGS(th) Coss Max V VDS=100V, VGS=0V IGSS RDS(ON) Typ VGS=10V, VDS=50V, ID=4.5A 6.5 12 nC 3 6 nC 1.5 nC 1.5 nC 4 ns VGS=10V, VDS=50V, RL=11, RGEN=3 2 ns 15 ns 2 ns IF=4.5A, dI/dt=500A/s 16 Body Diode Reverse Recovery Charge IF=4.5A, dI/dt=500A/s 44 ns nC A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA t 10s value and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C. Ratings are based on low frequency and duty cycles to keep initial TJ =25C. D. The RJA is the sum of the thermal impedance from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-ambient thermal impedance which is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev.2.0: April 2013 www.aosmd.com Page 2 of 6 AON2290 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 25 20 10V VDS=5V 6V 20 4.5V 15 ID(A) ID (A) 15 125C 10 10 3.5V 5 25C 5 VGS=3.0V 0 0 0 1 2 3 4 1 5 3 4 5 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) 100 Normalized On-Resistance 2.2 90 VGS=4.5V RDS(ON) (m) 2 80 70 60 VGS=10V 50 2 VGS=10V ID=4.5A 1.8 1.6 1.4 1.2 VGS=4.5V ID=4A 1 0.8 40 0 2 4 6 8 0 10 25 50 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature (Note E) ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 1.0E+02 160 ID=4.5A 140 1.0E+01 RDS(ON) (m) 120 IS (A) 125C 100 1.0E+00 125C 1.0E-01 80 25C 1.0E-02 60 1.0E-03 25C 40 1.0E-04 20 2 4 6 8 10 1.0E-05 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev.2.0: April 2013 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AON2290 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 500 VDS=50V ID=4.5A 400 Capacitance (pF) VGS (Volts) 8 6 4 Ciss 300 200 2 Coss 100 Crss 0 0 0 2 4 6 8 0 Qg (nC) Figure 7: Gate-Charge Characteristics 20 40 60 80 100 VDS (Volts) Figure 8: Capacitance Characteristics 10000 100.0 TA=25C 10s 10s RDS(ON) limited 1000 Power (W) ID (Amps) 10.0 100s 1.0 100 1ms 10ms 0.1 TJ(Max)=150C TC=25C 0.0 0.01 10 DC 0.1 1 10 100 VDS (Volts) 1000 1 1E-05 0.001 0.1 10 1000 Pulse Width (s) Figure 11: Single Pulse Power Rating Junction-toAmbient (Note H) VGS> or equal to 4.5V Figure 9: Maximum Forward Biased Safe Operating Area (Note F) ZJA Normalized Transient Thermal Resistance 10 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse D=Ton/T TJ,PK=TA+PDM.ZJA.RJA 1 RJA=80C/W 0.1 PD 0.01 Single Pulse 0.001 1E-05 0.0001 0.001 Ton 0.01 0.1 1 10 T 100 1000 Pulse Width (s) Figure 12: Normalized Maximum Transient Thermal Impedance (Note H) Rev.2.0: April 2013 www.aosmd.com Page 4 of 6 AON2290 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS ZJA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJC=8.0C/W 1 0.1 PD Single Pulse Ton 0.01 1E-05 0.0001 0.001 0.01 0.1 1 T 10 100 Pulse Width (s) Figure 13: Normalized Maximum Transient Thermal Impedance (Note G Rev.2.0: April 2013 www.aosmd.com Page 5 of 6 AON2290 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC DUT - Vgs Ig Charge R es istiv e S w itch ing T e st C ircu it & W a ve fo rm s RL V ds Vds DUT Vgs 90 % + Vdd VDC - Rg 1 0% Vgs V gs t d (o n ) tr t d (o ff) to n tf t o ff D io d e R eco very T est C ircu it & W a vefo rm s Q rr = - V ds + DUT V ds - Isd V gs Ig Rev.2.0: April 2013 Idt V gs L Isd + VD C - IF t rr dI/dt I RM V dd V dd V ds www.aosmd.com Page 6 of 6