SOGC 01, 03, 05
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31506
406 Revision: 27-Apr-10
FEATURES
•Isolated, bussed and dual terminator
schematics available
•0.110" (2.79 mm) maximum seated height
•Rugged, molded case construction
•0.050" (1.27 mm) lead spacing
•Reduces total assembly costs
•Compatible with automatic surface mounting
equipment
•Uniform performance characteristics
•Meets EIA PDP 100, SOGN-0003 outline dimensions
•Available in tube pack or tape and reel pack
•Compliant to RoHS directive 2002/95/EC
Notes
• 100 mΩ maximum on 0 Ω-jumper.
(1) ± 2 % standard, ± 1 % and ± 5 % available.
(2) Continuous working voltage shall be or maximum working voltage, whichever is less.
* Pb containing terminations are not RoHS compliant, excemptions may apply
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL SCHEMATIC
POWER RATING
TOLERANCE (1)
± %
RESISTANCE
RANGE
Ω
MAXIMUM
WORKING
VOLTAGE (2)
VDC
TEMPERATURE
COEFFICIENT
± ppm/°C
ELEMENT
P70 °C
W
PAC KAG E
P70 °C
W
SOGC16
01 0.1 1.6 1, 2, 5 10 to 1M 50 100
03 0.19 1.6 1, 2, 5 10 to 1M 50 100
05 0.1 1.6 2, 5 10 to 1M 50 100
SOGC20
01 0.1 2.0 1, 2, 5 10 to 1M 50 100
03 0.19 2.0 1, 2, 5 10 to 1M 50 100
05 0.1 2.0 2, 5 10 to 1M 50 100
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: SOGC200310K0GDC (preferred part number format)
GLOBAL
MODEL PIN COUNT SCHEMATIC RESISTANCE
VALUE
TOLERANCE
CODE PACKAGING SPECIAL
SOGC 16
20
01 = Bussed
03 = Isolated
00 = Special
R = Ω
K = kΩ
M = MΩ
10R0 = 10 Ω
680K = 680 kΩ
1M00 = 1.0 MΩ
F = ± 1 %
G = ± 2 %
S = Special
Z = 0 Ω Jumper
EJ = Lead (Pb)-free, tube
EA = Lead (Pb)-free,
tape and reel
DC = Tin/lead, tube
RZ = Tin/lead, tape and reel
Blank = Standard
(Dash number)
(Up to 3 digits)
From 1 to 999 as
applicable
Historical Part Number Example: SOGC2003103G (will continue to be accepted)
SOGC 20 03 103 G D02
HISTORICAL
MODEL PIN COUNT SCHEMATIC RESISTANCE
VALUE
TOLERANCE
CODE PACKAGING
New Global Part Numbering: SOGC1605131AGRZ (preferred part number format)
GLOBAL
MODEL PIN COUNT SCHEMATIC RESISTANCE
VALUE
TOLERANCE
CODE PACKAGING SPECIAL
SOGC 16
20
05 =
Dual terminator
3 digit impedance
code, followed by
alpha modifier
(see Impedance
Codes table)
F = ± 1 %
G = ± 2 %
J = ± 5 %
EJ = Lead (Pb)-free, tube
EA = Lead (Pb)-free,
tape and reel
DC = Tin/lead, tube
RZ = Tin/lead, tape and reel
Blank = Standard
(Dash number)
(Up to 3 digits)
From 1 to 999 as
applicable
Historical Part Number Example: SOGC1605221331G (will continue to be accepted)
SOGC 16 05 221 331 G R61
HISTORICAL
MODEL PIN COUNT SCHEMATIC RESISTANCE
VALUE 1
RESISTANCE
VALUE 2
TOLERANCE
CODE PACKAGING
P x R
CDG0K013002CGOS
ZRGA1315061CGOS
Document Number: 31506 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 27-Apr-10 407
SOGC 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount Vishay Dale
DIMENSIONS in inches (millimeters)
GLOBAL MODEL
AB
SOGC16 0.440 (11.18) 0.350 (8.89)
SOGC20 0.540 (13.72) 0.450 (11.43)
0.105
(2.67)
0.100 (2.54)
0.010 ± 0.005
(0.254 ± 0.127)
0.406 ± 0.012
(10.31 ± 0.305)
0.028 ± 0.010
(0.711 ± 0.254) Typ.
0.008
(0.203)
0.295
(7.49)
0.045 (1.14)
Ref.
Pin 1
0.045
(1.14) A
0.050 (1.27)
Non-Accum. T yp.
0.018 (0.457) Typ.
B
SOGC
0.006 (0.152) Max. Typ.
TECHNICAL SPECIFICATIONS
PARAMETER UNIT SOGC16 SOGC20
Package power rating (max. at + 70 °C) W 1.6 2.0
TCR tracking (- 55 °C to + 125 °C) ppm/°C ± 50
Voltage coefficient of resistance ppm/V < 50 typical
Maximum operating voltage VDC 50
Operating temperature range °C - 55 to + 125
Storage temperature range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Model number, schematic number, value tolerance, pin 1 indicator, date code
Marking resistance to solvents Permanency testing per MIL-STD-202, method 215
Maximum solder reflow temperature + 255 °C
Solderability Per MIL-STD-202, method 208E
Terminals Copper alloy. Solder dipped terminal
Body Molded epoxy
SOGC 01, 03, 05
Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31506
408 Revision: 27-Apr-10
IMPEDANCE CODES
CODE R1 (Ω)R
2 (Ω)CODER
1 (Ω)R
2 (Ω)
500B 82 130 141A 270 270
750B 120 200 181A 330 390
800C 130 210 191A 330 470
990A 160 260 221B 330 680
101C 180 240 281B 560 560
111C 180 270 381B 560 1.2K
121B 180 390 501C 620 2.7K
121C 220 270 102A 1.5K 3.3K
131A 220 330 202B 3K 6.2K
CIRCUIT APPLICATIONS
01 Schematic
15 or 19 resistors with one pin common
The SOGCxx01 circuit provides a choice of 15 or 19 nominally equal resistors, each
connected between a common lead (16 or 20) and a discrete PC board pin. Commonly
used in the following applications:
• MOS/ROM pull-up/pull-down • TTL input pull-down
• Open collector pull-up • Digital pulse squaring
• “Wired OR” pull-up • TTL unused gate pull-up
• Power driven pull-up • High speed parallels pull-up
03 Schematic
8 or 10 isolated resistors
The SOGCxx03 circuit provides a choice of 8 or 10 nominally equal resistors with each
resistor isolated from all others and wired directly across. Commonly used in the following
applications:
• “Wired OR” pull-up • Long-line Impedance balancing
• Power driven pull-up • LED current limiting
• Powergate pull-up • ECL output pull-down
• Line termination • TTL input pull-down
05 Schematic
TTL dual-line terminator; pulse squaring, 14 or 18 pairs of resistors
(R1 resistors are common to leads 16 or 20)
(R2 resistors are common to leads 8 or 10)
The SOGCxx05 circuit contains 14 or 18 pairs of resistors. Each pair is connected
between ground and a common line. The junctions of these resistor pairs are connected to
the input leads.
The 05 circuits are designed for TTL dual-line termination and pulse squaring.
SOGC16
SOGC20
Pin 1
SOGC16
SOGC20
Pin 1
R1 R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2 R2
R1 R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2 R2 R2 R2
SOGC16, SOGC20
Pin 1
Document Number: 31506 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 27-Apr-10 409
SOGC 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount Vishay Dale
Ambient Temperature °C
2.0
1.6
1.0
0.19
0.10
Single Resistor
SOGCxx03
SOGCxx01 & 05
SOGC2001, 03, 05 Pkg.
SOGC1601, 03, 05 Pkg.
Derating
Power Rating (W)
- 50 0 + 25 + 70 + 125 + 150
PERFORMANCE
TEST MAX. ΔR
(TYPICAL TEST LOTS)
Power conditioning ± 0.50 % ΔR
Thermal shock ± 0.50 % ΔR
Short time overload ± 0.25 % ΔR
Low temperature operation ± 0.25 % ΔR
Moisture resistance ± 0.50 % ΔR
Resistance to soldering heat ± 0.25 % ΔR
Shock ± 0.25 % ΔR
Vibration ± 0.25 % ΔR
Load life ± 0.50 % ΔR
Terminal strength ± 0.25 % ΔR
Insulation resistance 10 000 MΩ (minimum)
Dielectric withstanding voltage No evidence of arcing or damage
(200 VRMS for 1 min)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
