856884.0 - TriQuint Semiconductor

856884

707 MHz SAW Filter

Data Sheet: Rev D 07-15-15

- 1 of 7 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Applications

• For Band 40 TD-LTE applications

Applications

• Base Station

General Description

856884 is a general purpose Uplink filter for Band 12.

This fi

lter was specifically designed in a 3X3mm

hermetic package for base station applications and is

part of our wide portfolio of RF filters in the same

package.

Low insertion loss, coupled with high attenuation makes

this filter a natural choice for our cust

omers Uplink RF

filtering needs.

Product Features

• Usable bandwidth 18 MHz

• High attenuation

• Low Loss

• Single-ended operation

• No matching required for operation at 50Ω

• Small Size: 3.00 x 3.00 x 1.22 mm

• Ceramic Surface Mount Package (SMP)

• Hermetically Sealed

• RoHS compliant, Pb-free

Functional Block Diagram

Top VIew

4

2

3

16

5

Input Output

Gnd

Gnd Gnd

Gnd

Pin Configuration

Pin No. Label

2 Input

5 Output

1,3,4,6 Ground

Ordering Information

Part No. Description

856884 Packaged Part

856884 – EVB Evaluation board

Standard T/R size = 5,000 units/reel

856884

707 MHz SAW Filter

Data Sheet: Rev D 07-15-15

- 2 of 7 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

6. Describes the total variation over the defined frequency range

7. Relative to zero dB.

8. This is the optimum impedance in order to achieve the performance shown.

Parameter Rating

Storage Temperature −40 to +105 °C

Operable Temperature −20 to +105 °C

DC Voltage on any port ( instantaneous)

+5 Vdc

RF Input Power

(1)

+22dBm

Absolute Maximum Ratings

1. Input power with applied CW signal at =105° C in the 703 –

748MHz frequency band for 24 hrs.

Operation of this device outside the parameter ranges given above may cause permanent damage.

Electrical Specifications

(1)

Specified Temperature Range:

(2)

–40 to +85 °C

Parameter

(3)

Conditions Min Typical

(4)

Max Units

Center Frequency - 707 - MHz

Maximum Insertion Loss 698 – 716 MHz - 1.5 2 dB

698 – 716 MHz at +105°C

(5)

- 1.5 2.1 dB

Amplitude Variation 698 – 716 MHz - 0.5 1 dB p-p

Amplitude Variation

(over any 5MHz band)

(6)

698 – 716 MHz - 0.4 0.8 dB p-p

Phase Ripple 698 – 716 MHz - 6 30 deg

Group Delay Variation 698 – 716 MHz - 11 21 ns p-p

698 – 716 MHz at +105°C

(5)

- 11 23

Absolute Group Delay 698 – 716 MHz - 34 40 ns

70 – 120 MHz 50 52 -

70 – 120 MHz at +105°C

(5)

49 52 -

430– 470 MHz 41 44 -

728 – 746 MHz 9 21 -

Absolute Attenuation

(7)

753 – 763 MHz 35 39 -

804 – 815 MHz 39 42 - dB

930 – 940 MHz 41 45 -

930 – 940 MHz at +105°C

(5)

40 45 -

1609 – 1629 MHz 47 53 -

1860 – 1880 MHz 44 53 -

1860 – 1880 MHzat +105°C

(5)

37 53 -

2770 – 3043 MHz 15 19 -

2770 – 3043 MHz at +105°C

(5)

13 19 -

Input/output VSWR 698 – 716 MHz - 1.7:1 2:1 -

698 – 716 MHz at +105°C

(5)

- 1.7:1 2.3:1 -

Source/Load Impedance

(7)

Single-ended - 50 - Ω

Load Impedance

(7)

Single-ended - 50 - Ω

Notes:

1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance

over temperature.

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing

tolerances.

4. Typical values are based on average measurements at room temperature.

5. Extended Temperature operation: the filter can be operated up to +105°C with de-rated specification as noted

856884

707 MHz SAW Filter

Data Sheet: Rev D 07-15-15

- 3 of 7 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

856884 Evaluation Board

960700

XX

JJJYM

1,3,4,6

25

50 50

Ω

ΩΩ

Ω

Top View

Notes:

1. Top, middle & bottom layers: 1 oz copper, Substrates: FR4 dielectric, .031” thick, Finish plating: Nickel: 3-

8 µm thick, Gold:

.03-.2 µm thick, Hole plating: Copper min .0008 µm thick

Bill of Material – 856884-EVB

Reference Des. Value Description Manuf. Part Number

SMA N/A SMA Connector Radiall USA Inc. 9602-1111-018

PCB N/A 3-layer multiple 960700

PCB Mounting Pattern

.96

3.20 SQ

1.27

.38

.81

1.70

N

otes:

1. All dimensions are in millimeters.

2. This footprint represents a recommendation only

856884

707 MHz SAW Filter

Data Sheet: Rev D 07-15-15

- 4 of 7 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Measured Performance Plots

Test conditions unless otherwise noted:

Temp= +25 °C

856884

707 MHz SAW Filter

Data Sheet: Rev D 07-15-15

- 5 of 7 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Package Information, Marking and Dimensions

0.69

1.22 NOM.

1.32 MAX.

0.75

0.60

1.50

0.75

3.00

FV

code

Marking

Date code

JJJYM

logo

ID dot

TriQuint

Package Style: SMP-12A

Dimensions: 3.00 x 3.00 x 1.22 mm

Body: Al

2

O

3

ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

The date code consists of: day of the current year (Julian,

3 digits), Y = last digit of the year, and M = manufacturing site

code

Tape and Reel information

Standard T/R size = 5000 units/reel. All dimensions are in millimeters

3.25

Section A-A

1.75

Ø1.5

4.0 A

12.0

5.5

Ø1.5

4.0

2.0

3.25

1.4

0.21

A

Ø102 Ø20.2

Ø13.0 2.0 Direction of travel

Ø330

12.8

2.7 logo

ID dot TriQuint

856884

707 MHz SAW Filter

Data Sheet: Rev D 07-15-15

- 6 of 7 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Product Compliance Information

ESD Sensitivity Ratings

Caution! ESD-Sensitive Device

ESD Rating: 1B

Value: Passes ≥ 500 V min.

Test: Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

ESD Rating: B

Value: Passes ≥ 300 V min.

Test: Machine Body Model (MBM)

Standard: JEDEC Standard JESD22-A114

Solderability

Compatible with both lead-free (260

°C maximum reflow

temperature) and tin/lead (245

°C maximum reflow

temperature) soldering processes.

Refer to Soldering Profile for recommended guidelines.

RoHs Compliance

This part is

compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

• Lead Free

• Halogen Free (Chlorine, Bromine)

• Antimony Free

• TBBP-A (C

15

H

12

Br

4

0

2

) Free

• PFOS Free

• SVHC Free

MSL Rating

Not applicable. Hermetic package.

Important Notice

The information contained herein is believed to be reliable. TriQuint mak

es no warranties regarding the information

contained herein.

TriQuint assumes no responsibility or liability whatsoever for any of the information contained

herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information

contained herein.

The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated

with such information is entirely with the user.

All information contained herein is subject to change without notice.

Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The

information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any

patent rights, lice

nses, or any other intellectual property rights, whether with regard to such information itself or

anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-

s

ustaining applications, or other applications where a failure would reasonably be expected to cause severe

personal injury or death.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations:

Web: www.triquint.com Tel: 877-800-8584

Email: customer.support@qorvo.com

For information about the merger of RFMD and TriQuint as Qorvo:

Web: www.qorvo.com

For technical questions and application information: Email: flapplication.engineering@tqs.com