Bulletin I2715 rev. E 08/97 MB & JB SERIES SINGLE PHASE BRIDGE Power Modules Features 10 A 25 A 35 A Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E 62320 approved Description A range of extremely compact, encapsulated single phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and instrumentation applications. Major Ratings and Characteristics Parameters 100JB-L 26MB-A 36MB-A 250JB-L 35MB-A IO Units 10 25 35 65 65 60 IFSM @ 50Hz 148 400 475 A @ 60Hz 155 420 500 A @ 50Hz 110 790 1130 A2 s @ 60Hz 100 725 1030 A2 s @ TC I2t VRRM range TJ www.irf.com 50 to 1600 -40 to 150 A o C V o C 1 MB & JB Series Bulletin I2715 rev. E 08/97 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage V RRM , maximum repetitive VRSM , maximum non- I RRMmax. Code peak reverse voltage V repetitive peak rev. voltage V @ TJ max. 5 50 75 150 10 100 100JB..L 20 200 275 26MB..A 40 400 500 250JB..L 60 600 725 36MB..A 80 800 900 35MB..A 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700 mA 2 Forward Conduction Parameters IO Maximum DC output current @ Case temperature IFSM I2t 100JB-L 26MB-A 36MB-A Units Conditions 250JB-L 35MB-A 10 25 35 A Resistive or inductive load 8 20 28 A Capacitive load 65 65 60 C A Maximum peak, one-cycle 148 400 475 t = 10ms No voltage non-repetitive forward current 155 420 500 t = 8.3ms reapplied 125 335 400 t = 10ms 100% VRRM 130 350 420 t = 8.3ms reapplied 110 790 1130 t = 10ms No voltage 100 725 1030 t = 8.3ms reapplied 78 560 800 t = 10ms 100% VRRM 71 512 730 t = 8.3ms reapplied Maximum I2t for fusing A2 s Initial TJ = TJ max. I2t Maximum I2t for fusing 1.1 5.6 11.3 KA2s VF(TO)1 Low-level of threshold voltage 1.00 0.76 0.79 V (16.7% x x IF(AV) < I < x IF(AV)), @ TJ max. m (16.7% x x IF(AV) < I < x IF(AV)), @ TJ max. VF(TO)2 High-level of threshold voltage 1.17 0.92 0.96 rt1 Low-level forward slope resistance 15.4 6.8 5.8 I2t for time tx = I2 t x tx ; 0.1 tx 10ms, VRRM = 0V (I > x IF(AV) ), @ TJ max. (I > x IF(AV) ), @ TJ max. rt2 High-level forward slope resistance 10.8 5.0 4.5 VFM Maximum forward voltage drop 1.3 1.11 1.14 V TJ = 25 oC, I IRRM Max. DC reverse current 10 10 10 A TJ = 25 o C, per diode at VRRM VINS RMS isolation voltage base plate 2700 2700 2700 V f = 50 Hz, t = 1s 2 FM =I Favg (arm) x , tp = 400s www.irf.com MB & JB Series Bulletin I2715 rev. E 08/97 Thermal and Mechanical Specifications Parameters 100JB-L 26MB-A 36MB-A Units 250JB-L 35MB-A Junction temperature range -40 to 150 o C Tstg Storage temperature range -40 to 150 o C TJ RthJC Max. thermal resistance junction to case 3.5 1.7 RthCS Max. thermal resistance, case to heatsink 1.2 0.2 Conditions K/W Per bridge K/W Mounting surface , smooth, flat and greased wt Approximate weight 20 g T Mounting Torque 10% 2.0 Nm Bridge to heatsink Ordering Information Table Device Code 36 MB 160 A 1 2 3 4 26 36 1 - Current rating code: 2 - Circuit configuration: JB = Single phase american coding MB = Single phase european coding 3 - Voltage code: MB series = code x 10 = VRRM JB series = code x 100 = VRRM 4 - Diode bridge rectifier: A = 26MB, 36MB, 35MB Series L = 100JB and 250JB Series 100 & 250 & 35 = 10A (Avg) = 25A (Avg) = 35A (Avg) American coding European coding Outline Table Suggested plugging force: 200 N max; axially applied to faston terminals All dimensions in millimetres (inches) Not To Scale www.irf.com 3 MB & JB Series 150 1000 100JB..L Series 140 Instantaneous Forward Current (A) Maximum Allowable Case Temperature (C) Bulletin I2715 rev. E 08/97 130 120 110 100 180 (Rect) 90 80 180 (Sine) 70 TJ = 25C 100 TJ = 15OC 10 100JB..L Series 60 50 0 1 2 3 4 5 6 7 8 1 0.5 9 10 11 1.5 2.5 3.5 Instantaneous Forward Voltage (V) Fig. 1 - Current Ratings Characteristics Fig. 2 - Forward Voltage Drop Characteristics 25 180 (Rect) a elt -D /W 1K 15 3K /W 4K /W = 180 (Sine) A S- 20 R th 100JB..L Series TJ = 150C /W 2K 7K /W R Maximum Average Forward Power Loss (W) Average Forward Current (A) 10K /W 10 15K /W 5 0 0 2 4 6 8 Average Forward Current (A) 10 0 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 3 - Total Power Loss Characteristics 150 At Any Rated Load Condition And With Rated VRRM Applied Following Surge Initial TJ = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 120 90 60 100JB..L Series 30 1 4 10 100 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) 150 125 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150C No Voltage Reapplied Rated V RRMReapplied 100 75 50 100JB..L Series 25 0.01 0.1 1 Number of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current www.irf.com MB & JB Series 1000 150 26MB..A Series 250JB..L Series Instantaneous Forward Current (A) Maximum Allowable Case Temperature (C) Bulletin I2715 rev. E 08/97 130 110 180 (Rect) 90 180 (Sine) 70 TJ= 25C 10 26MB..A Series 250JB..L Series 1 0.5 50 0 5 10 15 20 25 TJ= 150C 100 30 1 Average Forward Current (A) 1.5 2 2.5 3 3.5 Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics 180 (Sine) = 2 3K /W R 30 K/W a elt -D 180 (Rect) /W 1K 40 SA 26MB..A Series 250JB..L Series T = 150C J R th Maximum Average Forward Power Loss (W) 50 4K /W 5K /W 20 7 K/W 10 K /W 10 0 0 5 10 15 20 Average Forward Current (A) 0 25 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 8 - Total Power Loss Characteristics At Any Rated Load Condition And With Rated V RRM Applied Following Surge Initial T J = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 200 26MB..A series 250JB..L series 100 1 10 100 450 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) 400 350 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150C No Voltage Reapplied Rated VRRMReapplied 250 150 26MB..A Series 250JB..L Series 50 0.01 0.1 1 Number of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current www.irf.com 5 MB & JB Series Bulletin I2715 rev. E 08/97 1000 36MB..A Series 35MB..A Series Instantaneous Forward Current (A) Maximum Allowable Case Temperature (C) 150 130 110 180 (Rect) 90 180 (Sine) 70 TJ = 25C 10 36MB..A Series 35MB..A Series 50 0 5 10 15 20 25 30 35 TJ = 150C 100 1 0.5 40 1 1.5 2 2.5 3 3.5 Average Forward Current (A) Instantaneous Forward Voltage (V) Fig. 11 - Current Ratings Chracteristics Fig. 12 - Forward Voltage Drop Characteristics Maximum Average Forward Power Loss (W) 80 36MB..A Series 35MB..A Series TJ = 150C R 180 (Sine) 60 th SA 1K /W 180 (Rect) = 0. 7 2K /W K/ W -D el ta R 40 3 K/ W 4 K/W 5 K/W 20 7 K/W 0 0 5 10 15 20 25 30 Average Forward Current (A) 35 0 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) 450 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ= 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 400 350 300 250 200 36MB..A Series 35MB..A Series 150 100 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 14 - Maximum Non-Repetitive Surge Current 6 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Fig. 13 - Total Power Loss Characteristics 500 450 400 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150C No Voltage Reapplied Rated VRRM Reapplied 350 300 250 200 150 100 0.01 36MB..A Series 35MB..A Series 0.1 1 Pulse Train Duration (s) Fig. 15 - Maximum Non-Repetitive Surge Current www.irf.com