SPEC NO: DSAG7623 REV NO: V.7 DATE: NOV/09/2010 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203005979
2.0x1.25mm SMD CHIP LED LAMP
Part Number: APHBM2012SURKCGKC
Hyper Red
Green
Features
z2.0mmx1.25mm SMT LED, 0.45mm max. thickness.
zBi -color, low power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG7623 REV NO: V.7 DATE: NOV/09/2010 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203005979
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APHBM2012SURKCGKC
Hyper Red (AlGaInP)
Water Clear
120 250
Green (AlGaInP) 30 55
120°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red
Green
650
574 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red
Green
630
570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red
Green
28
20 nm IF=20mA
C Capacitance Hyper Red
Green
35
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red
Green
1.95
2.1
2.5
2.5 V IF=20mA
IR Reverse Current Hyper Red
Green 10
10 uA VR = 5V
Parameter Hyper Red Green Units
Power dissipation 75 75 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 185 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAG7623 REV NO: V.7 DATE: NOV/09/2010 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203005979
APHBM2012SURKCGKC
Hyper Red
SPEC NO: DSAG7623 REV NO: V.7 DATE: NOV/09/2010 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203005979
Green
SPEC NO: DSAG7623 REV NO: V.7 DATE: NOV/09/2010 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203005979
APHBM2012SURKCGKC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAG7623 REV NO: V.7 DATE: NOV/09/2010 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203005979
PACKING & LABEL SPECIFICATIONS APHBM2012SURKCGKC
