Light Touch Switches/EVPAE 4.5 mmx2.2 mm Side-operational Edge Mount Light Touch Switches Type: EVPAE Features External dimensions : 4.5 mm x2.25 mm (Excluding the push plate), Height 2.9 mm (Printed circuit board being as low as 0.95 mm) Improved soldering strength in the operating direction Long operational life Measure against electro static discharge(ESD) Recommended Applications Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders Portable audio players, etc.) Explanation of Part Numbers 1 2 3 Product Code 4 5 Type 6 7 8 9 Height Specifications Type Snap action / Push-on type SPST Rating 10 A 2 Vdc to 20 mA 15 Vdc (Resistive load) Contact Resistance 1000 m max. Insulation Resistance Electrical 100 M min. (at 100 Vdc) Dielectric Withstanding Voltage 250 Vac (1 minute) Bouncing 10 ms max. (ON, OFF) Operating Force 1.6 N, 3.0 N, 3.5 N Mechanical Push Travel Push Strength 50 N (1 minute) Endurance Operating Life 200000 cycles min. 1.6 N, 3.0 N, 3.5 N : 0.15 mm 1.6 N (With L-shape terminals) : 0.13 mm Operating Temperature -40 C to +85 C -40 C to +85 C (Bulk) -20 C to +60 C (Taping) Storage Temperature Minimum Quantity/Packing Unit 3500 pcs. Embossed Taping (Reel Pack) Quantity/Carton 17500 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2016.09 industrial.panasonic.com/ac/e/ -1- Panasonic Corporation 2016 ANCTB26E 201606-Fd Light Touch Switches/EVPAE Dimensions in mm (not to scale) No. 1 (General dimension tolerance : 0.2) ( )dimensions are reference dimensions. EVPAE 1 1 2 1' 2 1' Edge Mount +00.5 -0.10 0 1.50.1 0.80.1 R0.3 max. 1 2 1' R0.3 to R0.5 2-0.25 max. (0.2tpy) 10.1 0.30.1 2-0.60.1 0.60.1 0.08 +00.7 0 0.4 max. (0.3tpy) Dimensions for reference 2.2 +0.2 1.7 -0.1 +0.2 4.8 0 3.10.1 1.350.1 +0.08 +0.2 +00.8 -0.05 0.95 1.650.1 0.4 max. (0.3tpy) 3.3 3.6 -0.1 2.6 -0.1 Circuit Diagram 0.55 2.9 1.5 4.5 2.2 2-0.25 max. 3.8 +0.1 0 5.60.1 Note : Please put your consideration not to let any burrs of printed wiring board stick out from the mounting surface of our switches. PWB land pattern for reference Push plate side (2.3) Height from surface of PCB : 0.95 mm Part Numbers Operating Force Height Push Plate Color Operating Life EVPAEBB2A 1.6 N 0.95 mm Black 200000 cycles EVPAEDB2A 3.0 N 0.95 mm Black 200000 cycles EVPAEJB2A No. 2 3.5 N 0.95 mm Black 200000 cycles (General dimension tolerance : 0.2) ( )dimensions are reference dimensions. 1 2 1' 1 2 1' With L-shape terminals GND +0.05 GND 0.95 -0.10 EVPAE 0.60.1 0.430.10 0.55 1.5 2.9 0.6 2.2 +0.08 3-1.650.10 3.6 -0.10 2.2 2-0.650.10 2-1.10.1 2-0.30.1 0.60.1 EVPAEGE2A 2-0.65 0 GND terminal shall be inserted to this hole. 1' 2-0.3 max. +0.1 3.8 0 5.40.1 6.40.1 PWB land pattern for reference Height from surface of PCB : 0.95 mm Operating Force Height 1.6 N 2 Push plate side (2.3) Part Numbers +0.10 1 2-0.3 max. 4.5 2-0.60.1 3.10.1 1.50.1 0.80.1 1.350.10 +0.2 1.7 -0.1 2.6 -0.1 +0.2 5.55 3-0.4 max. (0.3tpy) R0.15 3.3 0.95 mm Note : Please put your consideration not to let any burrs of printed wiring board stick out from the mounting surface of our switches. Push Plate Color Operating Life Black 200000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -2- Panasonic Corporation 2016 ANCTB26E 201606-Fd Light Touch Switches/EVPAE Recommended Reflow Soldering Conditions Embossed Carrier Taping Fan or Normal Temp. Tape width=12.0 mm 230 180 t1 Feeding hole Chip pocket P2 P0 D0 E 150 F W A B Operation Top (C) MAX. 260 (Normal Temp.) t2 9030 P1 Chip component Tape running direction 4010 Soldering Time (s) Unit: mm Part No. Height A B W EVPAE 2.9 5.50.2 2.90.2 12.00.3 F E P1 5.50.1 1.750.10 8.00.1 P2 P0 D0 Dia t1 t2 2.00.1 4.00.1 1.5+0.1 0 0.30.1 3.30.20 P2 P0 D0 Dia t1 t2 2.00.1 4.00.1 1.5+0.1 0 0.30.1 3.30.20 With L-shape terminals Unit: mm Part No. Height A B W F EVPAE 2.9 6.10.2 2.90.2 12.00.3 5.5 E P1 1.750.10 8.00.1 Standard Reel Dimensions in mm (not to scale) T E Item A B C D E C 2.00.5 B Rate (mm) 380.02.0 80.01.0 13.00.5 21.01.0 D r A W Item W T t r Rate (mm) 13.51.0 17.51.0 -- -- t Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -3- Panasonic Corporation 2016 ANCTB26E 201606-Fd