PHOTOCOUPLER PS2705-1 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SOP MULTI PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS2705-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light. It is designed for high density mounting applications. FEATURES * AC input response * High isolation voltage (BV = 3 750 Vr.m.s.) * High current transfer ratio (CTR = 100% TYP.) * SOP (Small Outline Package) type * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of taping product : PS2705-1-F3, F4 * Safety standards * UL approved: File No. E72422 * BSI approved: File No. 8219/8220 * CSA approved: File No. CA 101391 * DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS * Hybrid IC * Telephone/FAX * FA/OA equipment * Programmable logic controllers * Power supply Document No. PN10243EJ02V0DS (2nd edition) Date Published March 2006 CP(K) The mark shows major revised points. (c) NEC Compound Semiconductor Devices, Ltd. 1988, 2006 PS2705-1 PACKAGE DIMENSIONS (in millimeters) PS2705-1 4.00.5 TOP VIEW 4 1 3 2 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 0.15 +0.10 -0.05 2.0 0.10.1 2.10.2 7.00.3 4.4 2.54 0.50.3 0.4 +0.10 -0.05 0.25 M MARKING EXAMPLE No. 1 pin Mark 2705 N601 Trade Mark Type Number Assembly Lot *1 N 6 01 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Name *1 Bar : Pb-Free Remark "PS" and "-1" are omitted from original type number 2 Data Sheet PN10243EJ02V0DS PS2705-1 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS2705-1 PS2705-1-A Pb-Free Magazine case 100 pcs Standard products PS2705-1-F3 PS2705-1-F3-A Embossed Tape 3 500 pcs/reel (UL, BSI, CSA PS2705-1-F4 PS2705-1-F4-A PS2705-1-V PS2705-1-V-A Magazine case 100 pcs DIN EN60747-5-2 PS2705-1-V-F3 PS2705-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2705-1-V-F4 PS2705-1-V-F4-A *1 PS2705-1 approved) Approved (Option) *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10243EJ02V0DS 3 PS2705-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit IF 50 mA PD/C 0.8 mW/C PD 80 mW IFP 1 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 6 V IC 80 mA PC/C 1.5 mW/C PC 150 mW BV 3 750 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Diode Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-2 shorted together, 3-4 shorted together. 4 Data Sheet PN10243EJ02V0DS PS2705-1 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Transistor Symbol Conditions MIN. TYP. MAX. Unit 1.4 V Forward Voltage VF IF = 5 mA 1.1 Terminal Capacitance Ct V = 0 V, f = 1 MHz 60 Collector to Emitter Dark ICEO IF = 0 mA, VCE = 40 V CTR IF = 5 mA, VCE = 5 V 50 CTR1/ IF = 5 mA, VCE = 5 V 0.3 pF 100 nA 100 300 % 1.0 3.0 Current Coupled Current Transfer Ratio *1 (IC/IF) *2 CTR Ratio CTR2 Collector Saturation VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V Voltage Isolation Resistance RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz Rise Time Fall Time *3 tr *3 VCC = 5 V, IC = 2 mA, RL = 100 tf 10 11 0.4 pF 3 s 5 *1 CTR rank M: 50 to 150 (%) L: 100 to 300 (%) N: 50 to 300 (%) *2 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IC1 IF1 VCE IC2 IF2 *3 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 In monitor 50 VOUT RL = 100 Data Sheet PN10243EJ02V0DS 5 PS2705-1 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 75 50 25 25 0 50 75 200 150 1.5 mW/C 100 50 0 100 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 10 1 Forward Current IF (mA) Forward Current IF (mA) 60 TA = +100 C +75 C +50 C +25 C 0 C -25 C -55 C 0.1 40 20 0 -20 -40 -60 0.8 1.0 1.2 1.4 -80 -1.6 -1.2 -0.8 -0.4 1.6 0.4 0.8 1.2 1.6 Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50 10 000 IF = 25 mA 20 1 000 VCE = 40 V 24 V 10 V 100 10 1 10 mA 10 5 mA 5 2 2 mA 1 1 mA 0.5 0.2 0.1 -60 -40 -20 0 20 40 60 80 100 0.1 0.0 0.2 0.4 0.6 0.8 Collector Saturation Voltage VCE (sat) (V) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 6 0 Forward Voltage VF (V) Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 0.01 0.6 Data Sheet PN10243EJ02V0DS 1.0 PS2705-1 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 40 IF = 30 mA 20 mA 30 15 mA 20 10 mA 10 5 mA 2 0 4 6 8 10 ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.2 0.0 -50 -25 25 50 75 Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 100 VCE = 5 V Switching Time t ( s) 250 200 150 100 100 VCC = 5 V, IC = 2 mA 50 ton toff 10 5 td ts 1 0.5 50 0 0.05 0.1 0.5 1 5 0.1 50 50 10 100 Forward Current IF (mA) 1 000 IF = 5 mA, VCC = 5 V, 500 CTR = 169 % 500 1k 2k FREQUENCY RESPONSE 1.2 tf 1.0 10 5 tr td 1 0.5 Normalized Gain GV ts 100 50 0.1 100 200 Load Resistance RL () SWITCHING TIME vs. LOAD RESISTANCE Switching Time t ( s) 0 Collector to Emitter Voltage VCE (V) 300 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR Collector Current IC (mA) 50 0.8 0.6 RL = 1 k 510 300 100 0.4 0.2 500 1 k 5 k 10 k 50 k 100 k 0.0 2 5 10 20 50 100 200 500 Frequency f (kHz) Load Resistance RL () Remark The graphs indicate nominal characteristics. Data Sheet PN10243EJ02V0DS 7 PS2705-1 LONG TERM CTR DEGRADATION 1.2 CTR (Relative Value) 1.0 0.8 IF = 1 mA, TA = 25 C IF = 5 mA, TA = 25 C IF = 20 mA, TA = 25 C IF = 20 mA, TA = 60 C 0.6 0.4 0.2 0.0 1 102 103 104 105 106 Time (Hr) Remark The graph indicates nominal characteristics. 8 Data Sheet PN10243EJ02V0DS PS2705-1 TAPING SPECIFICATIONS (in millimeters) 1.550.1 2.9 MAX. 7.40.1 5.50.05 1.5+0.1 -0 12.00.2 2.00.05 4.00.1 1.750.1 Outline and Dimensions (Tape) 2.40.1 4.60.1 0.3 8.00.1 Tape Direction PS2705-1-F4 PS2705-1-F3 Outline and Dimensions (Reel) 21.00.8 13.00.2 R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 13.51.0 17.51.0 11.9 to 15.4 Outer edge of flange Packing: 3 500 pcs/reel Data Sheet PN10243EJ02V0DS 9 PS2705-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 10 Data Sheet PN10243EJ02V0DS PS2705-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10243EJ02V0DS 11 PS2705-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. IV for rated line voltages 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength Maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 710 Vpeak Upr 850 Vpeak Upr 1 140 Vpeak UTR 6 000 Vpeak Upr = 1.2 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices test) Upr = 1.6 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) 2 Clearance distance >5 mm Creepage distance >5 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C Ris MIN. VIO = 500 V dc at TA MAX. at least 100 C Ris MIN. 12 11 10 10 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 150 C Current (input current IF, Psi = 0) Isi 200 mA Power (output or total power dissipation) Psi 300 mW Ris MIN. 10 Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) 12 Data Sheet PN10243EJ02V0DS 9 PS2705-1 When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. * The information in this document is current as of March, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PN10243EJ02V0DS 13 PS2705-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0504