Astec Conventional Power W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 64 10 Watts AA10U Total Power: Input Voltages: No. of Outputs: 10 Watts 12V, 24V or 48V Single, Dual Electrical Specs Input Input range Input capacitance 9 to 36 VDC; 18 to 75 VDC 48 models 1.5uF typical 24 models 2.7uF typical 150mW typical No load input power Input reflected ripple (P-P) 48 Models 24 Models 82% (typ) Efficiency 4mA 10mA (see Note 2) Output Voltage tolerance Special Features * * * * * Unencapsulated Wide 4:1 input range 1 year warranty 1.0" x 2.0" x 0.38" case Meets EN55022A for conducted noise Line regulation Load regulation Noise/ripple Short circuit protection Overvoltage protection Transient response Switching frequency Temperature coefficient Environmental Operating ambient temperature range: -40C to +75C (no derating) Baseplate: 105C Max. 1.0% (main); 2.0% (aux) (factory set-point) +0.5% max (main); 0.5% (aux) 0.5% (10% load to full load (singles)) 1.0% (10% load to full load (duals)) 1% p-p (See Note 1) Continuous Power Cycle Zener clamp 1mS 50% Step load change to within 1% Vout All models 380kHz except 150S & 150D Models 300kHz (typ.) 0.02%/C max. Isolation I/O isolation Insulation resistance Insulation capacitance Fuse 1500 VDC min 50 M ohm 220pF .024 - 2.25A/250V 048 - 1A/250V Storage Temperature: -55C to +125C Humidity: 5% to 95% (non-condensing) EMI/RFI Shielding: Five-Sided MTBF: 361,000 hours (MIL-HDBK-217) Safety UL TUV 64 UL 1950 Recognized CAN22.2-950 Recognized EN60950 Certified America's (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 65 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 AA10U Ordering Information Input Voltage Output 1 Voltage 9-36V 9-36V 9-36V 9-36V 9-36V 9-36V 9-36V 3.3V @ 2.42A 5V @ 2.00A 12V @ 0.830A 15V @ 0.670A 5V @ .750A 12V@ .375A 15V@.300A 18-75V 18-75V 18-75V 18-75V 18-75V 18-75V 18-75V 3.3V @ 2.42A 5V @ 2.00A 12V @ 0.830A 15V @ .670A 5V@.750A 12V @ 0.375A 15V @ 0.300A Output 2 Voltage Maximum Power Model Number -5V @ .750A -12V @ 0.375A -15V @ 0.300A 8W 10W 10W 10W 7.5W 9W 9W AA10U-024L-033S AA10U-024L-050S AA10U-024L-120S AA10U-024L-150S AA10U-024L-050D AA10U-024L-120D AA10U-024L-150D -5V @ 0.750A -12V @ 0.375A -15V @ 0.300A 8W 10W 10W 10W 7.5W 9W 9W AA10U-048L-033S AA10U-048L-050S AA10U-048L-120S AA10U-048L-150S AA10U-048L-050D AA10U-048L-120D AA10U-048L-150D Please contact Astec for information on other output voltages, power ranges and configurations. Pin Assignments Single Output 1. 2. 3. 4. 5. +Vin -Vin Output 1 No pin COMM 0.38 (9.65) 0.15 (3.81) Dual Output 1. 2. 3. 4. 5. +Vin. -Vin Output 1 COMM Output 2 Notes: www.astec.com 0.10 (2.54) 0.60 (15.24) 0.8 (20.32) 3 1 1.00 (25.4) 0.20 (5.08) .80 (20.32) 4 2 0.40 (10.15) 5 BOTTOM VIEW ALL DIMENSIONS ARE IN INCHES (mm) .40 (10.15) Astec Conventional Power 1. 20MHz bandwidth. An external 0.1uf ceramic capacitor is recommended to be placed from +V out to -V out. 2. Meets FCC class A and ETS300-386-1 requirements for conducted noise. Consult factory for filter recommendations to meet FCC class B, VDE or EIC specifications. 3. All specifications are typical at nominal line, full load, and 25C unless otherwise noted. 4. All specifications subject to change without notice. Mechanical drawings are for reference only. 5. Calculated per MIL HDBK 217F, Ground Benign at 25C, full load. 6. Warranty: 1 yr 0.40 (1.01) DIA TYP 2.00 (50.80) 0.10 (2.54) 65