PLVA662A/T1 - NXP - Product.Network

DATA SH EET

Product speciﬁcation

Supersedes data of 1999 May 25 2004 Jan 14

DISCRETE SEMICONDUCTORS

PLVA6xxA series

Low-voltage avalanche regulator

diodes

ook, halfpage

M3D088

2004 Jan 14 2

Philips Semiconductors Product speciﬁcation

Low-voltage avalanche regulator diodes PLVA6xxA series

FEATURES

•Very low dynamic impedance at low currents:

approximately 1⁄20 of conventional series

•Hard breakdown knee

•Low noise: approximately 1⁄10 of conventional series

•Total power dissipation: max. 250 mW

•Small tolerances of VZ

•Working voltage range: nominal 5.00 to 6.80 V

•Non-repetitive peak reverse power dissipation:

maximal 30 W.

APPLICATIONS

•Low current, low power, low noise applications

•CMOS RAM back-up circuits

•Voltage stabilizers

•Voltage limiters

•Smoke detector relays.

DESCRIPTION

High performance voltage regulator diodes in small

SOT23 plastic SMD packages.

The series consists of PLVA650A to PLVA668A.

MARKING

Note

1. * = p: Made in Hong Kong.

* = t: Made in Malaysia.

* = W: Made in China.

PINNING

TYPE NUMBER MARKING CODE(1)

PLVA650A *9A

PLVA653A *9B

PLVA656A *9C

PLVA659A *9D

PLVA662A *9E

PLVA665A *9F

PLVA668A *9G

PIN DESCRIPTION

1 anode

2 not connected

3 cathode

Fig.1 Simplified outline (SOT23) and symbol.

handbook, halfpage

MAM243

n.c. 1

Top view

2004 Jan 14 3

Philips Semiconductors Product speciﬁcation

Low-voltage avalanche regulator diodes PLVA6xxA series

ORDERING INFORMATION

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134).

Note

1. Device mounted on an FR4 printed circuit-board.

TYPE

NUMBER PACKAGE

NAME DESCRIPTION VERSION

PLVA6xxA −plastic surface mounted package; 3 leads SOT23

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

IFcontinuous forward current −250 mA

IZRM repetitive peak working current tp= 100 µs; δ= 10% −250 mA

PZSM non-repetitive peak reverse power dissipation tp= 100 µs;Tj= 150 °C−30 W

Ptot total power dissipation Tamb =25°C; note 1 −250 mW

Tstg storage temperature −65 +150 °C

Tjjunction temperature −150 °C

2004 Jan 14 4

Philips Semiconductors Product speciﬁcation

Low-voltage avalanche regulator diodes PLVA6xxA series

ELECTRICAL CHARACTERISTICS

Tj=25°C; unless otherwise speciﬁed.

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

VFforward voltage IF=10mA −−0.9 V

VZworking voltage IZ= 250 µA

PLVA650A 4.80 5.00 5.20 V

PLVA653A 5.10 5.30 5.50 V

PLVA656A 5.40 5.60 5.80 V

PLVA659A 5.70 5.90 6.10 V

PLVA662A 6.00 6.20 6.40 V

PLVA665A 6.30 6.50 6.70 V

PLVA668A 6.60 6.80 7.00 V

VZworking voltage IZ=10µA

PLVA650A −4.30 −V

PLVA653A −5.20 −V

PLVA656A −5.51 −V

PLVA659A −5.85 −V

PLVA662A −6.19 −V

PLVA665A −6.49 −V

PLVA668A −6.80 −V

RZdynamic resistance 1 kHz superimposed;

IZAC is 10% of IZDC; IZ= 250 µA

PLVA650A −−700 Ω

PLVA653A −−250 Ω

PLVA656A to PLVA668A −−100 Ω

SZtemperature coefﬁcient IZ= 250 µA

PLVA650A −0.20 −mV/K

PLVA653A −1.60 −mV/K

PLVA656A −1.90 −mV/K

PLVA659A −2.40 −mV/K

PLVA662A −2.65 −mV/K

PLVA665A −2.90 −mV/K

PLVA668A −3.40 −mV/K

IRreverse current VR= 80% VZnominal

PLVA650A −−20000 nA

PLVA653A −−5000 nA

PLVA656A −−1000 nA

PLVA659A −−500 nA

PLVA662A −−100 nA

PLVA665A −−50 nA

PLVA668A −−10 nA

2004 Jan 14 5

Philips Semiconductors Product speciﬁcation

Low-voltage avalanche regulator diodes PLVA6xxA series

THERMAL CHARACTERISTICS

Note

1. Device mounted on an FR4 printed circuit-board.

IRreverse current VR= 50% VZnominal

PLVA650A −34 −nA

PLVA653A −22 −nA

PLVA656A −1.1 −nA

PLVA659A −0.9 −nA

PLVA662A −0.9 −nA

PLVA665A −0.9 −nA

PLVA668A −0.8 −nA

IRreverse current VR= 90% VZnominal

PLVA650A −21 −µA

PLVA653A −3.5 −µA

PLVA656A −1.3 −µA

PLVA659A −1.0 −µA

PLVA662A −0.05 −µA

PLVA665A −0.04 −µA

PLVA668A −0.006 −µA

∆VZline regulation

PLVA659A to PLVA668A ILO =10µA; IHI =1mA −−0.1 V

PLVA656A ILO =50µA; IHI =1mA −−0.1 V

PLVA650A ILO = 100 µA; IHI =1mA −−0.4 V

PLVA653A ILO = 100 µA; IHI =1mA −−0.2 V

Vnnoise voltage density f = 1 kHz; B = 1 kHz; IZ= 250 µA−−1.0

SYMBOL PARAMETER CONDITIONS VALUE UNIT

Rth(j-tp) thermal resistance from junction to tie-point 330 K/W

Rth(j-a) thermal resistance from junction to ambient note 1 500 K/W

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

µV

------------

2004 Jan 14 6

Philips Semiconductors Product speciﬁcation

Low-voltage avalanche regulator diodes PLVA6xxA series

PACKAGE OUTLINE

UNIT A

max. b

cDE e

Qwv

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

97-02-28

99-09-13

IEC JEDEC EIAJ

mm 0.1 0.48

0.38 0.15

0.09 3.0

2.8 1.4

1.2 0.95

1.9 2.5

2.1 0.55

0.45 0.1

0.2

DIMENSIONS (mm are the original dimensions)

0.45

0.15

SOT23 TO-236AB

detail X

0 1 2 mm

scale

1.1

0.9

Plastic surface mounted package; 3 leads SOT23

2004 Jan 14 7

Philips Semiconductors Product speciﬁcation

Low-voltage avalanche regulator diodes PLVA6xxA series

DATA SHEET STATUS

Notes

1. Please consult the most recently issued data sheet before initiating or completing a design.

2. The product status of the device(s) described in this data sheet may have changed since this data sheet was

published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.

3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.

LEVEL DATA SHEET

STATUS(1) PRODUCT

STATUS(2)(3) DEFINITION

I Objective data Development This data sheet contains data from the objective speciﬁcation for product

development. Philips Semiconductors reserves the right to change the

speciﬁcation in any manner without notice.

II Preliminary data Qualiﬁcation This data sheet contains data from the preliminary speciﬁcation.

Supplementary data will be published at a later date. Philips

Semiconductors reserves the right to change the speciﬁcation without

notice, in order to improve the design and supply the best possible

product.

III Product data Production This data sheet contains data from the product speciﬁcation. Philips

Semiconductors reserves the right to make changes at any time in order

to improve the design, manufacturing and supply. Relevant changes will

be communicated via a Customer Product/Process Change Notiﬁcation

(CPCN).

DEFINITIONS

Short-form specification  The data in a short-form

specification is extracted from a full data sheet with the

same type number and title. For detailed information see

the relevant data sheet or data handbook.

Limiting values definition Limiting values given are in

accordance with the Absolute Maximum Rating System

(IEC 60134). Stress above one or more of the limiting

values may cause permanent damage to the device.

These are stress ratings only and operation of the device

attheseor at anyotherconditions above thosegivenin the

Characteristics sections of the specification is not implied.

Exposure to limiting values for extended periods may

affect device reliability.

Application information  Applications that are

described herein for any of these products are for

illustrative purposes only. Philips Semiconductors make

norepresentationorwarrantythatsuchapplicationswillbe

suitable for the specified use without further testing or

modification.

DISCLAIMERS

Life support applications  These products are not

designed for use in life support appliances, devices, or

systems where malfunction of these products can

reasonably be expected to result in personal injury. Philips

Semiconductorscustomersusingorsellingtheseproducts

for use in such applications do so at their own risk and

agree to fully indemnify Philips Semiconductors for any

damages resulting from such application.

Right to make changes  Philips Semiconductors

reserves the right to make changes in the products -

including circuits, standard cells, and/or software -

described or contained herein in order to improve design

and/or performance. When the product is in full production

(status ‘Production’), relevant changes will be

communicated via a Customer Product/Process Change

Notification (CPCN). Philips Semiconductors assumes no

responsibility or liability for the use of any of these

products, conveys no licence or title under any patent,

makes no representations or warranties that these

products are free from patent, copyright, or mask work

right infringement, unless otherwise specified.

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed

without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license

under patent- or other industrial or intellectual property rights.

Philips Semiconductors – a w orldwide compan y

Contact information

For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825

For sales ofﬁces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.

Printed in The Netherlands R76/03/pp8 Date of release: 2004 Jan 14 Document order number: 9397 750 12445