NPN-Silizium-Fototransistor Silicon NPN Phototransistor Lead (Pb) Free Product - RoHS Compliant SFH 310 SFH 310 FA SFH 310 SFH 310 FA Wesentliche Merkmale Features * Spektraler Bereich der Fotoempfindlichkeit: 450 nm ...1100 nm (SFH 310) * 740 nm ...1100 nm (SFH 310FA) * Gehause: 3mm Radial (T1), Harz * Besonderheit des Bauteils: hohe Fotoempfindlichkeit * Spectral Range of Sensitivity: 450 nm ... 1100 nm (SFH 310) * 740 nm ... 1100 nm (SFH 310FA * Package: 3 mm Radial (T1), Epoxy * Feature of the device: high photosensitivity Anwendungen Applications * Lichtschranken * Industrieelektronik * Messen/Steuern/Regeln" * Photointerrupters * Industrial electronics * For control and drive circuits Typ Type Bestellnummer Ordering Code Fotostrom, Ee= 0.5mW/cm2, = 950nm, VCE = 5 V Photocurrent Ipce (mA) SFH 310 SFH 310-2/3 Q62702P0874 Q62702P3595 0.63 0.63...2.0 SFH 310 FA SFH 310 FA-2/3 Q62702P1673 Q62702P3596 0.63 0.63...2.0 2008-11-06 1 SFH 310, SFH 310 FA Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Kollektor-Emitterspannung Collector-emitter voltage VCE 35 V Kollektorstrom Collector current IC 50 mA Kollektorspitzenstrom, < 10 s Collector surge current ICS 100 mA Verlustleistung, TA = 25 C Total power dissipation Ptot 165 mW Warmewiderstand Thermal resistance RthJA 450 K/W 2008-11-06 2 SFH 310, SFH 310 FA Kennwerte (TA = 25 C, = 950 nm) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value SFH 310 SFH 310 FA Einheit Unit Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 880 890 nm Spektraler Bereich der Fotoempfindlichkeit 450 ... 1100 740 ... 1100 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 0.11 0.11 mm2 Abmessung der Chipflache Dimensions of chip area LxB LxW 0.5 x 0.5 0.5 x 0.5 mm x mm Halbwinkel Half angle 25 25 Grad deg. Kapazitat, VCE = 0 V, f = 1 MHz, E = 0 Capacitance CCE 7.5 7.5 pF Dunkelstrom Dark current VCE = 10 V, E = 0 ICEO 1 ( 50) 1 ( 50) nA S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 2008-11-06 3 SFH 310, SFH 310 FA Die Fototransistoren werden nach ihrer Fotoempfindlichkeit gruppiert und mit arabischen Ziffern gekennzeichnet. The phototransistors are grouped according to their spectral sensitivity and distinguished by arabian figures. Bezeichnung Parameter Symbol Symbol Wert Value -2 -3 Einheit Unit -4 Fotostrom, = 950 nm Photocurrent Ee = 0.5 mW/cm2, VCE = 5 V SFH 310: Ev = 1000 Ix, Normlicht/ standard light A, VCE = 5 V IPCE 0.63 ... 1.25 1.0 ... 2.0 1.6 ... 3.2 mA IPCE 3.0 4.8 7.7 mA Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 k tr , t f 5 8 12 s 150 150 150 mV Kollektor-Emitter-Sattigungsspannung VCEsat Collector-emitter saturation voltage IC = IPCEmin1) x 0.3, Ee = 0.5 mW/cm2 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 1) IPCEmin is the min. photocurrent of the specified group. Directional Characteristics Srel = f () 2008-11-06 4 SFH 310, SFH 310 FA Relative Spectral Sensitivity, SFH 310 Srel = f () Relative Spectral Sensitivity, SFH 310 FA Srel = f () Srel % 100 Srel % 80 80 70 70 60 60 50 50 40 40 30 30 20 20 OHF04042 100 10 OHF04075 10 0 400 500 600 700 800 900 nm 1100 Total Power Dissipation Ptot = f (TA) 0 400 500 600 700 800 900 nm 1100 Photocurrent IPCE = f (VCE), Ee = Parameter Dark Current ICEO = f (VCE), E = 0 OHF04049 10 1 nA OHF00871 200 I CEO mW P tot Photocurrent IPCE = f (Ee), VCE = 5 V 160 10 0 120 80 10 -1 40 0 0 20 40 60 10 -2 80 C 100 TA Dark Current ICEO = f (TA), VCE = 10 V, E = 0 OHF04050 10 4 nA I CEO 10 3 0 5 10 15 20 25 30 V 35 VCE Photocurrent IPCE = f (TA), VCE = 5 V, normalized to 25 C Capacitance CCE = f (VCE), f = 1 MHz OHF04051 8 pF C CE 7 PCE OHF01524 1.6 PCE 25 1.4 6 1.2 5 1.0 4 0.8 3 0.6 2 0.4 1 0.2 10 2 10 1 10 0 10 -1 10 -2 -25 0 25 50 75 C 100 0 -3 10 10 -2 10 -1 10 1 V 10 2 VCE TA 2008-11-06 10 0 5 0 -25 0 25 50 75 C 100 TA SFH 310, SFH 310 FA Mazeichnung Package Outlines 4.8 (0.189) 4.4 (0.173) o2.9 (0.114) o2.7 (0.106) 1.1 (0.043) 0.9 (0.035) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) 0.7 (0.028) 0.4 (0.016) 2.54 (0.100) spacing 0.6 (0.024) Area not flat 1.8 (0.071) 1.2 (0.047) 3.1 (0.122) 3.7 (0.146) 0.6 (0.024) 3.5 (0.138) 6.1 (0.240) 0.4 (0.016) 5.7 (0.224) 29.0 (1.142) 27.0 (1.063) Collector 3.4 (0.134) GEXY6710 Mae in mm (inch) / Dimensions in mm (inch). Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2008-11-06 6 s 250 SFH 310, SFH 310 FA Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2008-11-06 7