2 Counters, Panel Meters, Tachometers and Timers Totalizers Product Family Overview Introduction Limit Switch Totalizers are used in a wide variety of applications where accurate totals are needed. Typical applications include counting the number of parts produced, amount of material used, or the number of machine cycles occurring. Totalizers are the simplest and most common type of counter. As an added bonus, some models can perform both totalizing and ratemeter functions. T/R Durant (R) RST Finished Parts Limit Switch Application Example Manufacturing Process Parts are fed into a machine or process, an operation is performed, and the finished parts exit the machine or process. The subtract totalizer is used to indicate the number of parts in process. Raw Parts Application Example Totalizer Product Family Overview Table 1. Product Family Overview Product Family E5-024-C Characteristics Typical Applications Panel Cutout in Inches (mm) Page Number Non-replaceable battery (min. 8-yr. life) Compact, low cost and high efficiency 8-Digit LCD totalizers Manual or electrical reset Various counting modes/inputs Compact device with bright, LED display Multiple functions available: count, time, rate, multifunction, double-function 24V DC Power 0.870 x 1.772 (22 x 44) 22 0.870 x 1.772 (22 x 44) 24 Economical, multifunction display Large, LED characters AC or DC power options Large, easy-to-read display Position display Motor/pulley RPM 1.772 x 1.622 (45 x 92) 27 Portable/mobile/remote flow monitoring 1.299 x 2.677 (e.g. sewer pumping, pesticide application) (33 x 68) Position display, RPM Length measurement (e.g. carpet, cable) 25 28 Replacement for mechanical counters Transaction counting Parts counting Position indication or measurement Count, measure, time where small package and easy-to-read display required Position display Motor/pulley RPM E5-_24-E E5-496-E Courier Replaceable lithium battery 8-digit, high-visibility LCD display Optional backlighting Various input options available 6-digit, super bright LED display Multiple models available: totalizers, ratemeters, count controls, digital panel meters and flow controls Eclipse Length measurement and control 1.772 x 1.622 (45 x 92) Flow monitoring and control Process monitoring and display Voltage and current monitoring and display 8-digit, high-visibility, 2-line LCD display User-configurable control inputs Highly flexible control/display Flow control where simultaneous total and 2.667 x 2.667 rate display are required (68 x 68) Cut-to-length and other simple processes where flexibility of inputs/outputs required 34 Bright LED display w/14 mm characters Simple configuration with 14-button tactile 2.667 x 5.433 (68 x 138) 30 Various Mounting Configurations 16 Various Mounting Configurations 3 Ambassador keypad Many different versions fit almost any President application Various price, voltage and size ranges for different duty cycles and environments Long life and always readable display Electromechanical Various size ranges for different duty cycles and environments No power supply needed Long life and always readable display Cut-to-length machinery with batching Parts batching/palletizing Die press positioning control Applications where parameter changes are required Coin-operated equipment Gaming machines Printing presses Secondary machines (e.g. punch press) Winding and spooling equipment Position display Mechanical piece/cycle counting Mechanical PG05400001E Counters, Panel Meters, Tachometers and Timers Count Control Ambassador Series -- Durant(R) Main Counter Control Inputs Cat. No. 57601401 Features AC/DC powered, 2-line LCD display 8-digit totalizer 1/Tau ratemeter Totalizer and ratemeter scaling Four user-configurable control inputs Up to two output relays Two solid-state outputs RS-485 Serial communications Feet/Inches control available Standards and Certifications UL Listed CE Marked Technical Data and Specifications Power Input AC Operation -- 115V AC (15%) std., 50 to 60 Hz, 7W 230V AC (15%) opt., 50 to 60 Hz, 7W DC Operation: 10 - 15V DC opt., 300 mA maximum DC Power Output 12V DC (25%), 100 mA maximum (includes all line and load variations) Environmental Operating Temperature: 32 to 131F (0 to 55C) Storage Temperature: -4 to 158F (-20 to 70C) Operating Humidity: 85% Relative, non-condensing NEMA 4 rating when mounted with gasket provided PG05400001E Type: Bi-directional Digits: 6 Presets: Varies by Model Reset modes: Auto or manual reset to zero or preset Scaler Range: 0.00001 to 9.99999 Decimal Point: 5 positions, (6 on 4preset models) Output Latency: See Table 40 Batch Counter Relay Outputs Type: Increment with main counter recycle or final preset signal Digits: 6 Presets: 1 Output Latency: < 1 mS Totalizer Type: Bi-directional, same or opposite of main counter Digits: 8 Scaler: Shared with main counter Decimal Point: Tracks main counter Count Input Speeds See Tables 42 and 43 Count Inputs Sink -- Impedance: 4.6k ohms to +5V DC Voltage -- High: 3.5 to 34.0 Low: 0.0 to 1.9V DC Source (high) -- Impedance: 2.3k ohms to common Voltage -- High: 3.5 to 17.0V DC (100% duty cycle) Low: 0.0 to 1.9V DC Source (low) -- Impedance: 2.3k ohms to common DC Voltage -- High: 0.6 to 17.0V DC Low: -17.0 to -0.6V DC AC Voltage: 17V AC (48V PeakPeak) maximum Impedance: 4.7k ohms to +5V DC Voltage -- High: +3.7 to +24V DC Low: 0.0 to 0.9V DC Response: Minimum low 15 mS, minimum high 15 mS Type: SPDT contacts UL Ratings: 250V AC, 360V A Pilot Duty Transistor Outputs (2) Type: NPN open collector with transient protection Maximum Voltage (OFF state): 30V DC Maximum Current (ON state): 200 mA @ 1.3V DC Communication Type: RS-485 Format: 1 start bit, 7 data bits (ASCII), 1 parity bit, 1 stop bit Protocol: Opto-22 compatible Speed: 300, 1200, 2400, 4800, 9600 and 19200 baud Parity: Odd, Even, None (space transmitted, ignore received) Rate Indicator (Not available on models 57601-415 and 57601-485) Type: 1/Tau Digits: 6 Presets: 2 Scaler Range: 0.00001 to 99999 Decimal Point: 5 positions, programmable Accuracy: 0.015% of reading Update Time: See Table 41 Zero Time: See Table 41 Connections Type: Dual depluggable screw terminal strips Conductor Size: 14 - 22 AWG (2.1 - 0.38 mm2), 600V, solid, stranded, or fused (preferred) 43 44 Counters, Panel Meters, Tachometers and Timers Count Control April 2007 Ambassador Series -- Durant(R) Table 40. Output Latency for Ambassador Control Table 42. Ambassador Count Input Speeds -- 5760X405, 5760X415 Style Number Output Latency Solid-State A or B A and B 5760X401 5760X402 5760X403 0.7 to 2 mS 0.7 to 2 mS 0.7 to 2.7 mS A-B A+B -A + B 8250/8250 8250/8250 8000/8000 3000/3000 4000/4000 3000/3000 5760X404 5760X405 5760X415 0.7 to 2.7 mS < 1 mS < 1 mS A, B Dir 2A, B Dir A, B Rst 8000/40 4500/40 8250 -- -- -- Quad x 1 Quad x 2 Quad x 4 -- -- -- 3250 3250 2000 Tot A/Cnt B Tot + Cnt B 14000/9000 16000/8500 6500/6500 6500/6500 Table 41. Rate Indicator Specs for Ambassador Control Style Number Update Time Zero Time 5760X401 5760X402 5760X403 1 second, fixed 1 second, fixed 1 second, fixed 10 seconds, fixed 10 seconds, fixed 10 seconds, fixed 5760X404 5760X405 1 second, fixed 0.1 to 99.9 sec, programmable 0.1 to 999.9 sec, programmable 10 seconds, fixed 0.1 to 99.9 sec, programmable 0.1 to 999.9 sec, programmable 5760X415 Contact inputs = 40 Hz; B Direction inputs = 40 Hz and B Reset input = 10 S Min. Low. Input A not active on Feet/Inches control. Table 43. Ambassador Count Input Speeds -- 5760X401, 5760X402, 5760X403, 5760X404 Mode Input A/B Maximum Speed Solid-State (High Speed) Contact (Low Speed) Add/Sub Add/Add 20 kHz 20 kHz 40 kHz 40 kHz Count/Direction Count x 2/Direction 15 kHz 7.5 kHz 40 kHz -- Quadrature Quadrature x 2 6.5 kHz 6.5 kHz -- -- The maximum count speed depends on the selected count mode. All maximum speeds are shown with square waves (50% duty cycle) input. PG05400001E Counters, Panel Meters, Tachometers and Timers Count Control April 2007 Ambassador Series -- Durant(R) Product Selection Table 44. Product Selection -- Ambassador Series Count Control Description Catalog Number Single Preset with Rate, 115V AC Single Preset with Rate, Batch and Totalizer, 115V AC 57601401 57601402 Dual Preset with Rate, 115V AC Dual Preset with Rate, Batch and Totalizer, 115V AC 57601403 57601404 Four Preset with Rate, Batch and Totalizer, 10 - 15V DC Four Preset with Rate, Batch and Totalizer, 115V AC Four Preset with Rate, Batch and Totalizer, 230V AC 57600405 57601405 57602405 Feet/Inches Control, 115V AC Feet/Inches Control, 230V AC 57601415 57602415 * Dimensions Durant (R) C 123456 P1 10000 RST CLR RUN PGM PRNT EXIT ENT SEL 2.946 0.015 (74.83 0.38) * 5.60 0.03 (142.24 0.76) 2.946 0.015 (74.83 0.38) Gasket 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 Panel Cutout Max. Panel Thickness 0.50 (12.7) 2.677 0.028 (68.00 0.70) 2.677 0.028 (68.00 0.70) Figure 48. Ambassador Series Count Control -- Approximate Dimensions in Inches (mm) Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1 PG05400001E 45