PRODUCT MANUAL LTP2884 USB Isolator Features n n n n n n n n n n n 2.5kVRMS Rated Dielectric Isolation Voltage for One Minute USB 2.0 Full Speed and Low Speed Support Bus Powered with Optional External Supply Hot Plug Protection No Drivers or Software Required 400VRMS Continuous Working Voltage 20kV ESD Protection High Common Mode Transient Immunity Small Rugged Enclosure LED Status and Warning Indicators High Retention USB Connectors Description The LTP2884 is a complete USB isolator solution, ideal for any application requiring ground isolation, protection from large common mode voltage variations, or protection from spikes and surges. Built with convenience in mind, this robust isolator brings comprehensive protection to a wide variety of applications without the need for any configuration or additional software. At the heart of the LTP2884 is the LTM2884, an isolated USB 2.0 compatible Module(R) transceiver with isolated power and automatic USB bus speed selection. Isolator Module technology uses coupled inductors and an isolated power transformer to provide 2500VRMS of isolation between the upstream and downstream USB interface. All accessible lines on the LTP2884 carry additional surge protection and ESD protection up to 20kV. Uninterrupted communication is guaranteed for common mode transients greater than 30kV/s. speed selection configures integrated pull-up resistors on the upstream port to match those sensed on the downstream device. By default, downstream devices are powered (up to 1W) by the upstream bus through an isolated DC/ DC converter. Optionally, a wall adapter can be used, increasing available power to downstream devices to 2.5W. The LTP2884 has additional features which help to ensure reliable operation. Status LEDs indicate the presence of auxiliary and USB bus power. Warning LEDs indicate overcurrent on the upstream bus and undervoltage on the downstream bus, making it clear when an application requires auxiliary power. High retention USB connectors protect against accidental unplugging during operation. Design files for this circuit board are available at http://www.linear.com/demo L, LT, LTC, LTM, Linear Technology, Module and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. The LTP2884 is compatible with USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) operation. Automatic ltp2884fa 1 PRODUCT MANUAL LTP2884 Specifications MIN TYP MAX UNITS Power Operating Supply Range (Bus Power Mode) 4.4 5 5.5 V Operating Supply Range (Auxiliary Power Mode) 9.6 12 14.4 V Regulated Output Voltage 4.75 5 5.25 V Downstream VBUS Source Current (Bus Power Mode) 200 mA Downstream VBUS Source Current (Auxiliary Power Mode) 500 mA USB Interface Low Speed Data Rate 1.5 Mbps Full Speed Data Rate 12 Mbps Protection Rated Dielectric Insulation Voltage 2500 VRMS Maximum Continuous Working Voltage (Upstream to Downstream) 560 400 VPEAK VRMS Common Mode Transient Immunity 30 kV/s ESD Immunity 20 kV Mechanical Dimensions Weight 3.1 x 2.2 x 0.8 51 in grams ltp2884fa 2 PRODUCT MANUAL LTP2884 Connections and Indicators Auxiliary 12V DC: Power supply input for support of >200mA downstream load applications. Power connector is standard 4mm type with positive center pin. Input voltage range is 9.6V to 14.4V. Upstream: High retention USB type B connector. Connect with a standard USB cable to a computer or USB host. Downstream: High retention USB type A connector. Connect with a standard USB cable to any USB 2.0 full speed or low speed peripheral. LED Indicators VBUS: Green LED indicates the presence of VBUS voltage on the upstream bus. 12V: Green LED indicates the presence of voltage on the 12V Auxiliary power input. ILIM: Red LED shows when current on the up-stream VBUS is near or exceeds the maximum allowed to guarantee proper regulation of the downstream VBUS. If this LED is on, the LTP2884 needs to be powered from the 12V wall adapter for the current application, increasing available downstream power. GOOD: This green LED indicates that the downstream VBUS is above the minimum operating voltage of 4.75V. LOW: This red LED indicates that downstream VBUS has dropped below 4.75V. If on, it is an indicator that the current load of the downstream device is too high for the current configuration: >200mA for bus powered applications or >500mA for 12V powered applications. Note: 1. In bus powered hub applications the available downstream current is limited to 100mA. The LTP2884 would only be able to supply a few mA on its downstream side if connected to a bus powered hub. ltp2884fa 3 PRODUCT MANUAL LTP2884 Parts List ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER 1 4 C1, C2, C3, C5 CAP, CHIP, X7R, 0.1F, 5% , 50V, 0603 AVX, 06035C104JAT2A 2 1 C4 CAP, TANT, 100F, 10V, 20%, C AVX, TPSC107M010R0150 3 3 D5, D6, D8 LED, GREEN, SMD, 0805 KINGBRIGHT, APT2012ZGC 4 2 D7, D9 LED, RED, SMD, 0805 KINGBRIGHT, CRCW06031R00JNEA 5 3 F1, F2, F3 PTC RESETABLE FUSE, 1.10A, 6V, 1206 BOURNS, MF-NSMF110-2 6 1 J1 USB-B RECEPTACLE, HIGH RETENTION SAMTEC, USBR-B-S-S-O-TH 7 1 J2 POWER RECEPTABLE, 2mm x 6mm CUI INC, PJ-047AH 8 1 J3 USB-A RECEPTACLE, HIGH RETENTION SAMTEC, USBR-A-S-S-O-TH 9 1 Q1 MOSFET, N-CH 30V 5.1A SC70-6 VISHAY, SI1470DH-T1-E3 10 1 Q2 MOSFET, P-CH 30V 2.7A SC70-6 VISHAY, SI1471DH-T1-E3 11 1 Q3 MOSFET, N-CH D-S 30V 8-SOIC VISHAY, SI4214DDY-T1-GE3 12 2 R1, R9 RES, CHIP, 1, 5%, 1/10W, 0603 VISHAY, CRCW06031R00JNEA 13 1 R2 RES, CHIP, 1.15k, 1%, 1/10W, 0603 VISHAY, CRCW06031K15FKEA 14 1 R3 RES, CHIP, 4.42k, 1%, 1/10W, 0603 VISHAY, CRCW06034K42FKEA 15 1 R4 RES, CHIP, 5.62k, 1%, 1/10W, 0603 VISHAY, CRCW06035K62FKEA 16 1 R5 RES, CHIP, 169k, 1%, 1/10W, 0603 VISHAY, CRCW0603169KFKEA 17 1 R6 RES, CHIP, 19.6k, 1%, 1/10W, 0603 VISHAY, CRCW060319K6FKEA 18 1 R7 RES, CHIP, 100k, 1%, 1/10W, 0603 VISHAY, CRCW0603100KFKEA 19 3 R8, R10, R13 RES, CHIP, 3.65k, 1%, 1/10W, 0603 VISHAY, CRCW06033K65FKEA 20 1 R11 RES, CHIP, 0.1, 1%, 1/4W, 0805 VISHAY, WSL0805R1000FEA18 21 1 R12 RES, CHIP, 100, 1%, 1/10W, 0603 VISHAY, CRCW0603100RFKEA 22 6 TVS1 TO 3, 5 TO 7 DIODE TVS ARRAY, 5V, SOD323 BOURNS, CDSOD323-T05 23 1 TVS4 DIODE TVS ARRAY, 12V, SOD323 BOURNS, CDSOD323-T12 24 1 U1 IC, LTC4360-2 LINEAR LTC4360ISC8-2#PBF 25 1 U2 IC, LTC4412 LINEAR LTC4412IS6#PBF 26 1 U3 IC, LTC6108-2 LINEAR LT6108IMS8-2#PBF 27 1 U4 IC, LTC4365 LINEAR LTC4365ITS8-2#PBF 28 1 U5 IC, LTM2884 LINEAR LTM2884IY 29 1 U6 IC, LTC2906 LINEAR LTC2906ITS8#PBF 30 1 LIGHTPIPE LUMEX, LPA-C081301S-10 WALL ADAPTER, 12VDC. 7.2W VOLGEN, KTPS05-12006U Optional Components 31 1 ltp2884fa 4 PRODUCT MANUAL LTP2884 Schematic Diagram ltp2884fa Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. 5 PRODUCT MANUAL LTP2884 DEMONSTRATION BOARD IMPORTANT NOTICE Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions: This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations. If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LTC from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). No License is granted under any patent right or other intellectual property whatsoever. LTC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind. LTC currently services a variety of customers for products around the world, and therefore this transaction is not exclusive. Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and observe good laboratory practice standards. Common sense is encouraged. This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LTC application engineer. Mailing Address: Linear Technology 1630 McCarthy Blvd. Milpitas, CA 95035 Copyright (c) 2004, Linear Technology Corporation ltp2884fa 6 Linear Technology Corporation LT 0514 REV A * PRINTED IN USA 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 FAX: (408) 434-0507 www.linear.com LINEAR TECHNOLOGY CORPORATION 2014