Hologram Lasers GH6C005B3A/GH6C005B3B/GH6C005B5A/GH6C005B5B GH6C005B3A/GH6C005B3B GH6C005B5A/GH6C005B5B Compact Resin Stem Hologram Features Outline Dimensions 1.20.2 +0 4.8 - 0.1 o7.5 MAX. o6.60.2 2.00.15 4.770.15 3.30.2 (0.80.2) 3.970.2 3.20.15 2.40.15 Hologram device Emission point 1.390.1 from reference plane Reference plane (0.50.2) 20.2 Model No. (Unit : mm) +0 o8.2 - 0.05 GH6C005B3A GH6C005B3B 3.80.5 (1) Insert frame structure enables easy mounting compared to conventional pin structure. (2) Thin and compact package enables thin and compact pick-up design. GH6C005B3A/B : 4.8mm thickness GH6C005B5A/B : 3.0mm thickness (3) With built-in beam splitter and diffraction grating Laser for CD Audio/Video CD Player 12-0.40.1 (1) GH6C005B3A/GH6C005B5A ....Dual power supply (2) GH6C005B3B/GH6C005B5B ....Single power supply 1.50.1 Z Z o6.1 to 6.3 X +0 X Y Y o8.2 - 0.05 Applications 0.2 0.8 Pin configuration qwerty w D1 t D2 y D3 u D4 o D5 i !1 NC !0 NC e NC Emission point 1.390.1 from reference plane Reference plane (0.50.2) 20.2 12-0.40.1 GH6C005B5A GH6C005B5B +0 Y !2!! 1 o 0 iu Z X Absolute Maximum Ratings 2 Signal detection photodiode Operating temperature X Rating Unit PH 4.3 mW 2 V 30 V VR 15 V Topr -10 to +70 C 2 Storage temperature Tstg -40 to +85 C 3 Soldering temperature Tsold 260 C 1 2 3 Y Y X Z 0.2 5=4 451 451 0.40.1 (TC=25C) Symbol Laser Monitor photodiode 3 - 0.1 Y Reverse voltage X + 0 .05 0 0.2 1 Z (1.5) - o8.2 0.8 Parameter Optical power output Z o6.1 to 6.3 qwerty 2.40.15 Hologram device (0.80.2) Z X r 3.80.5 !2!! 1 o 0 iu 3.30.2 Y +0 3 - 0.1 3.20.15 1.20.2 4.770.15 LD !2 +0 o8.2 - 0.05 o7.5 MAX. o6.60.2 2.00.15 w GH6C005B5A GH6C005B5B GH6C005B3A GH6C005B3B Monitor PD Monitor PD (GH6C005B5A) (GH6C005B5B) (GH6C005B3A) (GH6C005B3B) q 451 0.40.1 Z X Terminal connection 451 +0 Y 4.8 - 0.1 (1) CD audio players (2) Video CD players 0.2 5=4 Output power from hologram laser, CW (Continuous Wave) drive Case temperature At the position of 1.6mm or more from the lead base (Within 5s) Notice Internet In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ 75 Hologram Lasers GH6C005B3A/GH6C005B3B/GH6C005B5A/GH6C005B5B Electro-optical Characteristics Parameter (VCC=5V, TC=25C) Symbol Conditions RF=6.0A MIN. TYP. MAX. -0.7 - +0.7 Unit m 1 Focal offset 2 Focal error symmetry BFES RF=6.0A -25 - +25 % 3 Radial error balance BRES PH=3.0mW -25 - +25 % 4 RF output amplitude IRF 7.2 - V FES output amplitude IFES PH=3.0mW RF=6.0A 4.3 5 2.6 3.9 5.2 V 6 RES output amplitude IRES 0.7 1.1 1.5 V Ith RF=6.0A - - 25 39 mA Operating current Iop PH=3.0mW - 36 50 mA Operating voltage Vop p PH=3.0mW - 1.85 2.20 V PH=3.0mW 770 780 795 nm DEF Threshold current Wavelength Output current GH6C005B3A/GH6C005B5A Im GH6C005B3B/GH6C005B5B Im Differential efficiency 1 2 d Distance between FES=0 and jitter minimum point At the condition of FES sensitivity = 20%/1m (a-b) / (a+b) PH=3.0mW, VR=15V 2.0mW I(3.0mW)-I(1.0mW) 0.06 0.32 0.6 mA 0.05 0.22 0.6 mA 0.17 0.27 0.55 mW/mA a-b 2(a+b) 3 a (+amplitude of RES) a (+amplitude of FES) GND b (-amplitude of RES) b (-amplitude of FES) 4 5 6 76 Notice Internet Amplitude of D2+D3+D4 (focal servo ON, radial servo ON) D2-D3 (Focal vibration) D1-D5 (focal servo ON, radial servo OFF) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ Hologram Lasers GH6C005B3A/GH6C005B3B/GH6C005B5A/GH6C005B5B Electro-optical Characteristics of Laser Diode (Design Standard*) Parameter Emission characteristics Symmetry Symbol Parallel Perpendicular S// S Conditions Po=3mW, Into NA=0.11 x Misalignment position y Interference pattern intensity z - Po=3mW (TC=25C) MIN. TYP. MAX. -25 - +25 % -15 - +15 -80 - +80 % m -80 - +80 m -80 - +80 m - - 0.99 - MIN. TYP. MAX. Unit - 0.11 - mA/mW - - 150 nA - 3.5 - pF Electrical Characteristics of Monitor Photodiode (Design Standard*) (TC=25C) (GH6C005B3A/GH6C005B5A) Parameter 1 Conditions Symbol Sensitivity S Dark current ID Terminal capacitance Ct VR=15V (TC=25C) (GH6C005B3B/GH6C005B5B) Parameter 1 1 S Dark current ID Terminal capacitance Ct Conditions VR=15V VR=15V, f=1MHz MIN. TYP. MAX. Unit - 0.07 - mA/mW - - 150 nA - 7.7 - pF For hologram output power Electro-optical Characteristics of Photodiode for Signal Detection (Design Standard*) (GH6C005B3A) Symbol Reverse voltage VR Dark current Id p Wavelength Terminal capacitance Short circuit current Response time 2 Symbol Sensitivity Parameter 3 Unit Ct Isc tr, tf D4 Segment MIN. TYP. MAX. Unit 15 - 150 V A, B, C VR=15V - - 10 nA A, B, C - 800 - nm A, B, C 1.2 - 5.0 pF B, C 1.4 - 5.8 pF A 130 210 340 nA A 50 80 110 nA B 70 115 160 nA C - 10 200 ns A - 10 120 ns B, C VR=15V, f=1MHz Ev=1 000lx VR=15V, RL=180 Applicable divisions correspond to output terminals. D1 D2 D3 D5 (TC=25C) 2 Conditions IR=10A 3 Current of each segment (At other segments, Anode and Cathode is short-circuited.) Segment No. Output D 1, D 5 ....................................A D 2, D 5 ....................................B D 3, D 5 ....................................C * These parameters are not guaranteed performance, but general specifications of each optical element which makes up a hologram laser. * Please refer to the chapter "Handling Precautions" Notice Internet In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ 77 Application Circuits NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115