DA100 SERIES Transformers for Digital Audio Data Transmission FEATURES Compatible with Leading Chip Sets ET Constant MIN Return Loss MIN 100kHz - 3MHz Common Mode Rejection TYP 100kHz, 110 mH H Vs dB dB DA101 1:1 1.00 - 1.59 0.22 15 46.80 52.10 DA102 1:1 2.00 - 3.00 0.39 20 40.40 49.70 DA103 1:1 4.00 - 5.96 0.91 28 36.30 46.40 DA101M/R 1:1 1.00 - 1.59 0.22 15 46.80 52.10 DA102M/R 1:1 2.00 - 3.00 0.39 20 40.40 49.70 DA103M/R 1:1 4.00 - 5.96 0.91 28 36.30 46.40 Package Style Leakage Inductance MAX 100kHz, 10mV Order Code Primary Inductance 10kHz 10mV Turns Ratio & Phase SELECTION GUIDE DIP 2kVrms Isolation Standard Pinout Surface Mount Option CECC00802 Reflow (280C) UL 94V-0 Package Materials Low Profile Suitable for Both 75 & 110 Circuits Lead Free Compatible SM DESCRIPTION The Digital Audio Range of transformers is designed to improve the balance of transmitter and receiver circuitry in hi-fi equipment, video games and other applications requiring high-performance digital audio transmission. Compliant with AES/EBU recommendations for the digital audio interface offering optimised shunt capacitance between primary and secondary windings. Capable of operating over the audio data rate frequency range, providing isolation from 60Hz noise. www.cdpoweronline.com ABSOLUTE MAXIMUM RATINGS Operating free air temperature range Storage temperature range Specifications typical at TA =25C For tape and reel packaging details refer to datasheet NDC AN002. 0C to 70C -40C to 125C DA100 SERIES Transformers for Digital Audio Data Transmission MECHANICAL DIMENSIONS 0.10 (2.54) 6 Pin DIP 0.37 (9.52) Top View 1 0.35 (8.89) 6 1 DA101 1 3 XYYWW 4 0.006 (+0.15) O0.05 (1.20) 0.000 (-0.00) 0.25 (6.35) 0.14 0.02 (3.440.50) 0.012 (0.30) 0.007 (0.20) 6 Pin SM 0.024 (0.63) 0.020 (0.53) 0.20 (5.08) 0.40 (10.16) 0.50 12.70 0.37 (9.52) 0.06 (1.60) Top View 1 0.35 (8.89) 1 2 DA103M 1 5 3 XYYWW 0.10 (2.54) 6 4 0.04 (1.00) 0.45 (11.50) 0.25 (6.35) 0.012 (0.30) 0.007 (0.20) 0.10 (2.54) 0.04 (0.90) 0.025 (0.63) 0.021 (0.53) All dimensions in mm XX.XX 0.25mm. All pins on a 2.54mm pitch and within 0.25mm of true position. C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. (c) C&D Technologies (NCL) Limited 2002 NMP DA100.4 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.cdpoweronline.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 email: info@cdtechno-ncl.com www.cdpoweronline.com C&D Technologies Inc. 3400 E Britannia Drive, Tucson, Arizona 85706, USA Tel: +1 (800) 547-2537 Fax: +1 (520) 741-4598 email: sales@cdtechno.com