CT3377 Datasheet
Digital Multimeter Accessory Kit
Deluxe accessory kit for high-performance bench digital multimeters (DMM's)
Description
This kit of accessories was assembled to facilitate requirements
by high-performance bench digital multimeters (DMM's) users.
All the most popular accessories in one kit. Excellent for a new
testing bench or replacement for worn out equipment.
- Silicone jacketed test lead wire
- MiniProbes w/Spring loaded Stainless Steel Tips
- Packaged in Plastic Case
Kit Contains:
-(4) Test Lead 4mm Shth P-RaP Silic 0.75, 100 cm (40"): (2)
Black, (2) Red
-(2) Spg Tip Mini-Probe-4mm Jack: (1) Black, (1) Red
-(1) Insulated BNC male Adapt-4mm Safety Jacks
-(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red
-(2) Mini Flex Clip-4mm Jack-Silic 0.40, 10 cm: (1) Black, (1)
Red
-(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red
-(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red
-(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch
Technical data subject to change.
© Cal Test Electronics 2018. caltestelectronics.com
All specifications apply to the unit after a temperature stabilization time of 20 minutes over an
ambient temperature range of 25°C ± 5°C.
Specifications
Temperature (degrees) -20 to +80 C
RoHS (2011/65/EU) Compliant
Specifications are subject to change without notice. To ensure the most current version of this
manual, please download the current version from our website: caltestelectronics.com
Technical data subject to change.
© Cal Test Electronics 2018. caltestelectronics.com
