14.2mm(0.56INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SBC56-21EGWA High Efficiency Red Green Features Description z 0.56 inch digit height. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Excellent character appearance. Light Emitting Diode. z Easy mounting on P.C. boards or sockets. The Green source color devices are made with Gallium z Mechanically rugged. Phosphide Green Light Emitting Diode. z Standard:gray face, white segment. z RoHS compliant. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677 Selection Guide Part No. Dice Iv (ucd) [1] @ 10mA Lens Type Description Min. Typ. 3600 8000 *1400 *2400 3600 11000 *2200 *4500 High Efficiency Red (GaAsP/GaP) SBC56-21EGWA White Diffused Common Cathode, Rt.Hand Decimal. Green (GaP) Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 617 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Green 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] V 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677 SBC56-21EGWA High Efficiency Red SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677 Green SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677 PACKING & LABEL SPECIFICATIONS SBC56-21EGWA SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677 SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAA9196 REV NO: V.9A DATE: JUN/20/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000677