Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 1 of 7 North America only
FEATURES:
Models
Single output
Model
Max
Output
Power
(W)①
Output
Voltage
Range
(V)③
Output
Current
(A)③
Input
Voltage
(VAC/Hz)
Input
Voltage
(VDC)
Mode of Operation
Efficiency
(%)
115
VAC 230
VAC 277
VAC
AMER150C-50300AZ 150 36-50 0-3 90-305/47-440 130-430 Constant Current 87 89 89
Constant Voltage② 87 88 89
AMER150C-42350AZ 147 21-42 0-3.5 90-305/47-440 130-430 Constant Current 86 88 88
Constant Voltage② 86 88 88
AMER150C-36420AZ 150 24-36 0-4.16 90-305/47-440 130-430 Constant Current 86 88 88
Constant Voltage② 86 88 88
AMER150C-24630AZ 144 12-24 0-6.3 90-305/47-440 130-430 Constant Current 85 87 87
Constant Voltage② 85 87 87
① Exceeding the maximum output power will permanently damage the converter
② The dimming feature is not supported when units are used in Constant Voltage mode only,
③ In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown.
All models can be ordered with optional North American colour input wires (add “–NA” to part number when ordering)
NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C,
humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See
http://www.aimtec.com/terms-sale
AMER150C-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with
the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are
prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or
cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge
suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations
prior to installation may damage sensitive equipment permanently.
Input Specifications
Parameters Conditions Typical Maximum Units
Current (full load)
115 VAC 2000 mA
230 VAC 1000 mA
277 VAC 900 mA
Inrush current <2ms (cold start)
115 VAC 50 A
230 VAC 75 A
277 VAC 90 A
Leakage current I/O 0.25 mA
I/FG, O/FG 3.5 mA
Power factor
115 VAC 0.98
230 VAC 0.94
277 VAC 0.92
External fuse Recommended slow blow type 3.5 A
Start-up time 900 ms
AC-DC Constant Current or Constant
Voltage LED Driver
Over Voltage Protection
Over Current Protection
Input range 90-305VAC/47-440Hz
Waterproof Case rated IP68
High Efficiency up to 89%
Power Factor Correction
Operating temperature -40 to 80°C
Dimmable via resistive / 0-10Vdc / PWM
5 Years Limited Warranty
Short Circuit Protection
Over Temperature Protection
Click on Series name for product info on aimtec.com
Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 2 of 7 North America only
Output Specifications
Parameters Conditions Typical Maximum Units
Current accuracy ±3 %
Line regulation LL-HL ±2 %
Load regulation 0-100% load ±3 %
Ripple & Noise ④ 200 mV p-p
Hold-up time (min) 40 ms
Current adjustment range 100-10 %
PWM dimming frequency 100-3,000 Hz
Analogue dimming 0-10 V
④Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) or (C/C) and 47µF (E/C) parallel capacitor.
Isolation Specifications
Parameters Conditions Typical Maximum Units
Tested voltage
I/O 3sec 3750 VAC
I/FG 2000 VAC
O/FG 500 VAC
Isolation resistance 500 VDC >100 MΩ
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 125 KHz
Over current protection ≧105
Over voltage protection ≧105
Short circuit protection Auto recovery
Over temperature protection Detect transformer temperature 125°C oC
Operating temperature See derating table -40 to +80 oC
Maximum case temperature 100 oC
Storage temperature -40 to +95 oC
Temperature coefficient ±0.02 % / oC
Cooling Free air convection
Humidity Non condensing 20 - 95 % RH
Case material Aluminum
Potting Epoxy (IP68 rated)
Wires UL1015 18AWG input & 14AWG output *20CM
Weight 900 g
Dimensions (L X H X W) 7.13 x 2.32 x 1.85 inches 181.00 x 59.00 x 47.00 mm
MTBF >400,000 hrs (MIL-HDBK-217F at +25°C)
Safety Specifications
Parameters
Standards
Meets UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13
Information Technology Equipment EN55022 Class B
Harmonic Current Emissions IEC/EN 61000-3-2, Class C
Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity IEC 61000-4-2 Level 3
RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2
Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2
Surge Immunity IEC 61000-4-5 Level 3
RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2
Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1
Voltage dips, Short Interruptions Immunity IEC 61000-4-11
Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 3 of 7 North America only
Dimensions
Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 4 of 7 North America only
Resistive Dimming Application Circuit
Derating
Model Number Maximum Pot
Value (kΩ)
AMER150C-50300AZ 100.00
AMER150C-42350AZ 100.00
AMER150C-36420AZ 100.00
AMER150C-24630AZ 100.00
230VAC
Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 5 of 7 North America only
Dimming Performance
AMEPR150C-50300AZ
Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 6 of 7 North America only
AMER150C-36420AZ
Series AMER150C-AZ
up to 6.3A | AC-DC / DC-DC | LED Driver / Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.F 7 of 7 North America only
AMER150C-24630AZ
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
