https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Distribution block, bridged internally, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 17.5 A, connection method: Push-in connection, number of connections: 6, cross section: 0.14 mm-2.5 mm, AWG:26-14, width: 12.5 mm, height: 17.7 mm, color: green, mounting type: for snapping onto a DIN rail adapter Your advantages Space-saving potential distribution, thanks to compact micro potential distributors Convenient test options, thanks to test openings at every terminal point Clear arrangement thanks to marking of all terminal points Space-saving, thanks to the compact design Flexible use, thanks to direct mounting with flange covers from accessories Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4055626432526 Weight per Piece (excluding packing) 6.000 g Custom tariff number 85369010 Country of origin Poland Technical data General Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories Number of levels 1 Number of connections 6 01/03/2021Page1/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Technical data General Potentials 1 Nominal cross section 1.5 mm Color green Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.56 W Maximum load current 22 A Maximum total current 26 A Nominal current IN 17.5 A Nominal voltage UN 450 V Open side panel No Ambient temperature (operation) -60 C ... 105 C (max. short-term operating temperature130C) Ambient temperature (storage/transport) -25 C ... 60 C (for a short time, not exceeding 24h, -60C to +70C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 C ... 70 C Ambient temperature (actuation) -5 C ... 70 C Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Ageing test for screwless modular terminal block temperature cycles 192 Relative insulation material temperature index (Elec., UL 746 B) 130 C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 C Static insulating material application in cold -60 C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 01/03/2021Page2/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Technical data Dimensions Width 12.5 mm Length 21.6 mm Height 17.7 mm Connection data Connection method Push-in connection Stripping length 8 mm ... 10 mm Connection in acc. with standard IEC60998-2-2 Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 2.5 mm Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.14 mm Conductor cross section flexible max. 1.5 mm Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm Connection cross sections directly pluggable 0.34 mm 2.5 mm 26 14 Conductor cross section solid min. 0.34 mm Conductor cross section solid max. 2.5 mm Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm Internal cylindrical gage A1 / B1 Standards and Regulations Connection in acc. with standard IEC60998-2-2 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 01/03/2021Page3/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 11.0 27141120 eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals 01/03/2021Page4/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Approvals Approvals CSA / EAC / EAC / LR / UL Recognized / cUL Recognized / cUL Recognized / DNV GL / IECEE CB Scheme / VDE Zeichengenehmigung / BV Ex Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 20 A 20 A 10 A mm/AWG/kcmil 26-12 26-12 26-12 EAC 13631 RU CDE.AI30.B.01102 EAC RU CDE.BL08.B.00644 LR http://www.lr.org/en LR2002627TA UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 20 A 20 A 10 A mm/AWG/kcmil 26-12 26-12 26-12 01/03/2021Page5/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Approvals cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 20 A 20 A 10 A mm/AWG/kcmil 26-12 26-12 26-12 DNV GL https://approvalfinder.dnvgl.com/ Nominal voltage UN 500 V Nominal current IN 24 A IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 450 V Nominal current IN 17.5 A mm/AWG/kcmil 1.5 VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 450 V Nominal current IN 17.5 A mm/AWG/kcmil 0.2-1.5 BV http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials TAE00002TT DE1-61977 40047798 59146/A0 BV 01/03/2021Page6/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Accessories Accessories Insulating sleeve Insulating sleeve-ISH 1,5/0,2-3206131 Insulating sleeve, color: white Insulating sleeve-ISH 1,5/0,5-3031034 Insulating sleeve, color: gray Jumper Plug-in bridge-FBS 2-4-3030116 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red Plug-in bridge-FBS 2-4 GY-3030118 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray 01/03/2021Page7/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Accessories Plug-in bridge-FBS 2-4 BU-3030117 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue Labeled terminal marker Marker card-SK 3,8 REEL P4,15 WH CUS-0825990 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 3.8mm Marker card-SK 2,8 REEL P4,15 WH CUS-8199987 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 2.8mm Marker card-SK 3,8 REEL P4,15 WH CUS-8199988 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 3.8mm Mounting material Flange-PTFIX 1,5-F-1049503 Flange, with screw-on fixing, width: 7.7 mm, height: 17.7 mm, color: gray, mounting type: Screw mounting 01/03/2021Page8/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Accessories DIN rail adapter-PTFIX 1,5-NS15A-1049500 DIN rail adapter, length: 21.6 mm, width: 8 mm, height: 10.85 mm DIN rail adapter-PTFIX 1,5-NS35-1049497 DIN rail adapter, length: 58.1 mm, width: 21.6 mm, height: 11 mm Support bracket-PTFIX 1,5-NS35AD-1049498 Support bracket, width: 8 mm Assembly adapters-PTFIX 1,5-RZF-1050613 Adapter for direct mounting Terminal marking Marking foil for zack marker strip-TML (EX3,8)R-0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x3.8mm, Number of individual labels: 1 01/03/2021Page9/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Accessories Marking foil for zack marker strip-TML (104X3,8)R-0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels: 2500 Marking foil for zack marker strip-TML (104X2,8)R-0801832 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels: 2500 Marking foil for zack marker strip-TML (EX2,8)R-0801836 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x2.8mm, Number of individual labels: 1 Marker for terminal blocks-US-TML (104X3,8)-0830768 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 3.8 mm, Number of individual labels: 22 Marker for terminal blocks-US-TML (104X2,8)-0830767 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 2.8 mm, Number of individual labels: 26 01/03/2021Page10/11 https://www.phoenixcontact.com/us/products/3002771 Distribution block-PTFIX 6X1,5 GN-3002771 Accessories Marker card-SK U/3,8 WH:UNBEDRUCKT-0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440 Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600 Label-MM-TML (EX3,8)R C1 WH/BK-1092026 Label, Roll, white, unlabeled, can be labeled with: THERMOFOX, THERMOMARKGO, THERMOMARK GO.K, mounting type: adhesive, for terminal block width: 8000 mm, lettering field size: continuous x 3.8mm Test plug terminal block Accessories-MPS-MT 1-S4-B RD-1982800 Accessories, number of positions: 1, pitch: 0 mm Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/03/2021Page11/11