1
2
notice_e-01
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called “TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’ s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to “Foreign Exchange and For-
eign Trade Control Law” of Japan, “U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
190
1
2
chipantenna01_e-01
■ FEATURES
■ ORDERING CODE
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
■ PART NUMBERS
■ APPLICATIONS
AH 212M Type, AF 216M Type, AF 816M Type, AF 116M Type
AH 104F Type
AH 316M Type
AH 104N Type
AH 083F Type
AH 086M Type
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
◦Compact and Low-profile
◦Wide bandwidth and High Gain
◦Stable temperature characteristics
◦Bluetooth®, Wireless LAN, GPS, WiMAX, ZigBee, UWB
CHIP ANTENNAS
❶Type
AH Multilayer Antenna
AF Helical Antenna
❸Dimensions (case size) ［mm］
212 2.0×1.25
216 2.5×1.6
816 8.0×1.6
316 3.2×1.6
083 8.0×3.0
104 10.0×4.0
086 8.0×6.0
❹Special Code
F Inverted F
M Mono Pole
NMono Pole
(Dual)
❺Frequency ［MHz］
example
1575 1574.397～1576.443
2450 2400～2500
5550 3100～8000
1. Describe Center Frequency
2. Lower Frequency for Dualband
❻Spec Code
01～
S1～Applicable to AH104F
❼Packaging
ーT Tape & Reel
❷Electrode Code
△With Plating
△＝Blank space
A F △216M245001－T
❶ ❷ ❸ ❹ ❺ ❻ ❼
E
REFLOW
Type L W T E a b c Standard Quantity (pcs)
Embossed Tape
AF 216M 2.5±0.2 1.6±0.2 1.6±0.2 0.5±0.3 ーーー 2000
AF 816M 8±0.2 1.6±0.2 1.6±0.2 0.5±0.3 ーーー
AH212M 2＋0.3 1.25±0.2 0.85±0.2 0.5±0.3 ーーー 4000
AH 316M 3.2±0.15 1.6±0.15 0.5±0.1 0.5±0.2 ー1.0 min. ー3000
AH 083F 8±0.3 3±0.3 1±0.3 ー3.1±0.3 1±0.3 1.15±0.3 1000
AH 104F 10±0.3 4±0.3 1±0.3 ー2.5±0.3 1±0.3 1±0.3 2000
AH 104N 10±0.3 4±0.3 1±0.3 ー3±0.3 0.8±0.3 1.5±0.3
AH 086M 8±0.3 6±0.3 1±0.3 ー1.8±0.2 1±0.3 ー1000
Unit : mm (inch)
－0.1
Applications Ordering Code External Dimensions (mm) Center Frequency (MHz)
GPS AF 816M157502 8.0×1.6×1.6 1575
AH 316M157501 3.2×1.6×0.5 1575
W-LAN (2.4GHz）
Bluetooth®
WiMAX （2.5GHz）
ZigBee
AF 216M245001 2.5×1.6×1.6 2450
AH 212M245001 2.0×1.25×0.85 2450
AH 316M245001 3.2×1.6×0.5 2450
AH 083F245001 8.0×3.0×1.0 2450
AH 104F2450S1 10.0×4.0×1.0 2450
AH 104F2650S1 10.0×4.0×1.0 2650
W-LAN（2.4GHz／5GHz）AH 104N2450D1 10.0×4.0×1.0 2450/5400
UWB & WiMAX（3.5GHz）AH 086M555003 8.0×6.0×1.0 5550
HIGH FREQUENCY PRODUCTS
191
1
2
chipantenna01_e-01
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
Typical Characteristics on Taiyo Yuden evaluation board
●AF 216M245001
●AF 816M157502
Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz）
440MHz
Bandwidth: 180MHz
11
(VSWR: less than 2)
1.325 1.575 1.825
Typical characteristics of VSWR Typical characteristics of radiation pattern （@1.575GHz）
●AH 316M157501
Typical characteristics of VSWR Typical characteristics of radiation pattern （@1.575GHz）
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
−X
＋X
＋Y
＋X
−Y
＋Y
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
ZX-Plane
＋X
＋Z
−Z
−X
Vertical
polarization
Horizontal
polarization
＋X
−Z
＋Z
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋Z
−Z
−X
＋X
−Z
＋Z
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
−X
＋X
＋Y
＋X
−Y
＋Y
Bandwidth: 90MHz
(VSWR: less than 2)
1.325 1.575 1.825
●AH 212M245001
Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz）
Bandwidth: 260MHz
(VSWR: less than 2)
1950 2450 2950
XY-Plane
−Y
−X
＋X
＋Y
＋X
−Y
＋Y
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋Z
−Z
−X
＋X
−Z
＋Z
Vertical
polarization
Horizontal
polarization
192
1
2
chipantenna01_e-01
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
Typical Characteristics on Taiyo Yuden evaluation board
●AH 104F2450S1
Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz）
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
●AH 083F245001
Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz）
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
Bandwidth:150MHz
2
300MHz
●AH 316M245001
Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz）
Bandwidth: more than 170MHz
(VSWR: less than 2)
Bandwidth: 190MHz
(VSWR: less than 2)
2.0 2.53.0
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
HIGH FREQUENCY PRODUCTS
193
1
2
chipantenna01_e-01
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
Typical Characteristics on Taiyo Yuden evaluation board
●AH 104N2450D1
Typical characteristics of VSWR （2GHz band）
Typical characteristics of radiation pattern （@2.45GHz）
Typical characteristics of VSWR （5GHz band）
Typical characteristics of radiation pattern （@5.25GHz）
Typical characteristics of VSWR Typical characteristics of radiation pattern （@3.96GHz）
●AH 086M555003
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
Vertical
polarization
Horizontal
polarization
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
Vertical
polarization
Horizontal
polarization
ZX-Plane
＋X
＋X
−Z
＋Z
＋Z
−Z
−X
XY-Plane
−Y
＋X
−Y
＋Y
−X
＋X
＋Y
Vertical
polarization
Horizontal
polarization
Bandwidth:1200MHz
4.9 5.4 5.9
234567 8910
Bandwidth:500MHz
194
1
2
chipantenna01_e-01
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1
2
chipan_reli-PRP1
chipan_reli_e-01
■ PACKAGING
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
◦Embossed Tape
①Minimum Quantity
Type Standard Quantity (pcs)
Embossed Tape
AF216M, AF816M, AH104F, AH104N 2000
AH316M 3000
AH083F, AH086M 1000
AH212M 4000
②Tape Material
③Taping Dimensions
Type A B W T
AF216M, AH212M
AH316M
178±2.0 50 min. 10.0±1.5 3.0 max.
(7.0±0.08) (2.0 min.) (0.394±0.06) (0.12 max.)
AF816M
AH083F
178±2.0 50 min. 17.0±1.0 2.5 max.
(7.0±0.08) (2.0 min.) (0.67±0.04) (0.1 max.)
AH104F
AH104N
330±2.0 100±1.0 25.5±1.0 3.0 max.
(13.0±0.08) (3.94±0.04) (1.0±0.04) (0.12 max.)
AH086M 330 ± 2.0 100 ± 1.0 17.0 ± 1.0 2.5 max.
(13.0±0.08) (3.94±0.04) (0.67±0.04) (0.1 max.)
Unit : mm (inch)
⑤Reel size
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as
illustrated below.
④Leader and Blank Portion
160mm or more 100mm or more
Type Chip Cavity Tape Widthness Insertion Pitch Tape Thickness MAX.
A B C D F K T
AF216M 1.85±0.2 2.75±0.2 8±0.2 3.5±0.1 4±0.1 1.95 0.3
（0.073±0.008） （0.108±0.008） （0.315±0.008） （0.138±0.004） （0.157±0.004） （0.077） （0.012）
AF816M 1.95±0.2 8.4±0.2 16±0.3 7.5±0.1 4±0.1 2.05 0.35
（0.077±0.008） （0.331±0.008） （0.630±0.012） （0.296±0.004） （0.157±0.004） （0.081） （0.014）
AH316M 1.9±0.2 3.5±0.2 8±0.2 3.5±0.1 4±0.1 0.85 0.3
（0.075±0.008） （0.138±0.008） （0.315±0.012） （0.138±0.004） （0.157±0.004） （0.033） （0.012）
AH083F 3.35±0.2 8.35±0.2 16±0.3 7.5±0.1 8±0.1 1.55 0.3
（0.132±0.008） （0.329±0.008） （0.630±0.012） （0.295±0.004） （0.315±0.004） （0.061） （0.012）
AH104F,
AH104N
4.35±0.2 10.35±0.2 24±0.3 11.5±0.1 8±0.1 1.55 0.3
（0.171±0.008） （0.407±0.008） （0.945±0.012） （0.435±0.004） （0.315±0.004） （0.061） （0.012）
AH086M 6.25±0.2 8.26±0.2 16±0.3 7.5±0.1 12±0.1 1.3 0.3
（0.246±0.008） （0.325±0.008） （0.630±0.012） （0.296±0.004） （0.473±0.004） （0.051） （0.012）
AH212M 1.5±0.2 2.3±0.2 8±0.3 3.5±0.1 4±0.1 1.5 0.3
（0.059±0.008） （0.091±0.008） （0.315±0.012） （0.138±0.004） （0.157±0.004） （0.059） （0.012）
Unit : mm (inch)
1
2
chipan_reli-PRP2 chipan_reli_e-01
■ RELIABILITY DATA
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Operating Temperature Range
Specified Value －20～＋80℃
2. Storage Temperature Range
Specified Value －40～＋85℃
【Test Methods and Remarks】
※with being taped, ー20～＋40℃
3. Solderability
Specified Value At least 90% of immersed terminal surface is covered by new solder.
【Test Methods and Remarks】
Solder temperature : 230±5℃
Duration : 3±1 sec.
Preconditioning : Preheating at 150℃ after immersion into flux.
4. Thermal Shock
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery after 10 times of 30min.immersion alternately at ー40℃ and 85℃ of temperature,followed by evaluating electrical characteristics.
5. High Temperature Storage Test
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical characteristics.
6. Low Temperature Storage Test
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with ー40℃ of temperature, followed by evaluating electrical characteristics.
7. Humidity Storage Test
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90～95% relative humidity followed by evaluating electrical characteristics.
8. Resistance to Reflow
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics.
1
2
chipan_reli-PRP3 chipan_reli_e-01
■ PRECAUTIONS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. PCB Design
Precautions ◆Land pattern design
Please do not arrange the surface and inside layer pattern near the antenna mounting area.
Technical
Consider-
ations
◆Land pattern design
Land pattern dimension examples and recommended antenna land pattern
2. Soldering
Technical
Consider-
ations
◆Conditions of Reflow soldering (for reference)
・ Pb Free Reflow Profile ・ Reflow profile
3. Storage Conditions
Precautions
◆Storage conditions
1. The Products should not be used in the following environments :
・ exposure to special gases such as (C12, NH3, SOx, NOx)
・ exposure to volatile gas or inflammable gas
・ exposure to a lot of dust
・ exposure to water or condensation
・ exposure to direct sanlight or freezing
2. The Products should be kept in the following conditions :
・ Temperature : ー10～＋40℃
・ Humidity : 70％RH max.
3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage.
※ Components should be preheated to within
100 to 130℃ from soldering temperature.
※ Assured to be reflow soldering for 2 times.
Note : The above profiles are the maximum allow-
able soldering condition, therefore these
profiles are not always recommended.
■ Please contact our offices for further details of specifications.
All of the standard values listed here are subject to change without notice due to technical improvements.
Therefore, please check the specifications carefully before use.
AF216M/816M AH316M
AH104F
AH104N AH086M
AH083F
Type Dimensions
L P a
AF216M 2.5 1.5 3
AF816M 8 7 5
AH212M 2 1 3
Unit : mm
