THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
1
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
General Description
Features
Functional Diagram
Passive: No DC Bias Required
Input IP3: +20 dBm
LO/RF Isolation: 40 dB
Wide IF Bandwidth: DC - 8 GHz
12 Lead Ceramic 3x3 mm SMT Package: 9mm2
Electrical Specications, TA = +25° C, IF= 1 GHz, LO= +13 dBm*
Typical Applications
The HMC260LC3B is ideal for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
The HMC260LC3B is a general purpose double
balanced mixer in a leadless RoHS compliant
SMT package that can be used as an upconverter
or downconverter between 14 and 26 GHz. This
mixer requires no external components or matching
circuitry. The HMC260LC3B provides excellent LO to
RF and LO to IF suppression due to optimized balun
structures. The mixer operates with LO drive levels
above +9 dBm. The HMC260LC3B eliminates the
need for wire bonding, allowing use of surface mount
manufacturing techniques.
Parameter Min. Typ. Max. Min. Ty p. Max. Units
Frequency Range, RF & LO 14 - 18 18 - 26 GHz
Frequency Range, IF DC - 8 DC - 8 GHz
Conversion Loss 7.5 10.5 912 dB
Noise Figure (SSB) 7.5 10.5 912 dB
LO to RF Isolation 34 40 30 35 dB
LO to IF Isolation 24 30 24 35 dB
RF to IF Isolation 15 25 25 30 dB
IP3 (Input) 18 20 dBm
IP2 (Input) 50 50 dBm
1 dB Gain Compression (Input) 12 14 dBm
*Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
2
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
Conversion Gain vs. Temperature
Conversion Gain vs. LO Drive
Isolation
IF Bandwidth
Return Loss
Upconverter Performance
Conversion Gain vs. LO Drive
-20
-15
-10
-5
0
13 15 17 19 21 23 25 27
+25 C
+85 C
-40 C
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
13 15 17 19 21 23 25 27
+9 dBm
+11 dBm
+13 dBm
+15 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
024681012
IF Return Loss
Conversion Gain
RESPONSE (dB)
FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
13 15 17 19 21 23 25 27
RF/IF
LO/RF
LO/IF
ISOLATION (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
13 15 17 19 21 23 25 27
RF
LO
RETURN LOSS (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
13 15 17 19 21 23 25 27
+9 dBm
+11 dBm
+13 dBm
+15 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
3
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
MxN Spurious Outputs
Input IP2 vs. Temperature *
Input IP3 vs. LO Drive * Input IP3 vs. Temperature *
Input IP2 vs. LO Drive *
* Two-tone input power = -10 dBm each tone, 1 MHz spacing.
Input P1dB vs. Temperature
nLO
mRF 01234
0xx -2 17 xx xx
118 038 50 78
282 74 71 65 84
3xx 90 95 77 90
4xx xx 93 98 104
RF = 18 GHz @ -10 dBm
LO = 17 GHz @ +13 dBm
All values in dBc below the IF output power level.
0
5
10
15
20
25
13 15 17 19 21 23 25 27
+9 dBm
+11 dBm
+13 dBm
+15 dBm
IP3 (dBm)
LO FREQUENCY (GHz)
0
5
10
15
20
25
13 15 17 19 21 23 25 27
+25 C
+85 C
-40 C
IP3 (dBm)
LO FREQUENCY (GHz)
0
10
20
30
40
50
60
70
80
13 15 17 19 21 23 25 27
+9 dBm
+11 dBm
+13 dBm
+15 dBm
IP2 (dBm)
LO FREQUENCY (GHz)
0
10
20
30
40
50
60
70
80
13 15 17 19 21 23 25 27
+25 C
+85 C
-40 C
IP2 (dBm)
LO FREQUENCY (GHz)
6
8
10
12
14
16
18
13 15 17 19 21 23 25 27
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
4
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
Absolute Maximum Ratings
RF / IF Input +15 dBm
LO Drive +27 dBm
Channel Temperature 150 °C
Continuous Pdiss (Ta = 85 °C)
(derate 3.95 mW/°C above 85 °C) 260 mW
Thermal Resistance
(junction to ground paddle) 253 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK,
OR LASER MARK LOCATED APPROX. AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC260LC3B Alumina, White Gold over Nickel MSL3 [1] H260
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
5
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
Pin Number Function Description Interface Schematic
1, 3, 4, 6, 7, 9 GND Package bottom must also be connected to RF/DC ground.
2LO This pin is DC coupled
and matched to 50 Ohm.
5 IF
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to DC,
this pin must not source or sink more than 2 mA of current or
part non-function and possible part failure will result.
8 RF This pin is DC coupled
and matched to 50 Ohm.
10, 11, 12 N/C No connection required. These pins may be connected to RF/
DC ground without affecting performance.
Pin Descriptions
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
6
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
Evaluation PCB
Item Description
J1, J2 SRI SMA Connector
J3 Johnson SMA Connector
U1 HMC260LC3B Mixer
PCB [2] 117611 Evaluation PC B
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25 RF
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
List of Materials for Evaluation PCB 109952 [1]
