2.7 V GaAs SP3T Switch: GSM - CDMA - GPS
DC - 3.0 GHz
MASWSS0144
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
V1
2
RoHS
Compliant
Electrical Specifications: TA = 25°C, VC = 0 V, 2.7 V, Pin = +34 dBm, Z0 = 50 Ω 2
2. For positive voltage control, external DC blocking capacitors are required on all RF ports.
3. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 500 MHz, 100 pF for 0.5 GHz - 2.5 GHz.
The low frequency response will be determined by the capacitor value used.
Parameter Test Conditions Units Typ.
Insertion Loss3
RF1 and RF2 Paths
1 GHz
1-2 GHz
2-3 GHz
dB
dB
dB
0.60
0.60
0.65
Insertion Loss3
RF3 Path
1 GHz
1-2 GHz
2-3 GHz
dB
dB
dB
0.65
0.65
0.75
Isolation
All Paths
0.5-1 GHz
1-2 GHz
2-3 GHz
dB
dB
dB
30
24
19
Return Loss (All RF ports) 0.5-3 GHz dB 21
Cross Modulation
RF1 Path
Cell Band: CDMA TX = +25 dBm @ 820 MHz,
RXINT = -23 dBm @ 865 MHz
PCS Band: CDMA TX = +20 dBm @ 1950 MHz,
RXINT = -23 dBm @ 1870 MHz
dBm
dBm
-102
-105
2nd Harmonic
RF2 Path
GSM Band: Pin = 34 dBm
DCS/PCS Band: Pin = 32 dBm
dBc
dBc
-75
-75
3rd Harmonic
RF2 Path
GSM Band: Pin = 34 dBm
DCS/PCS Band: Pin = 32 dBm
dBc
dBc
-72.5
-68.0
P0.1dB
RF1 & RF2 Paths
VC = 2.7 V
VC = 5.0 V
dBm
dBm
36.0
37.5
Trise, Tfall 10% to 90% RF, 90% to 10% RF nS 50
Ton, Toff 50% control to 90% RF, and 50% control to 10% RF nS 70
Transients In Band mV 10
Control Current |VC| = 2.7 V µA 10
Max.
0.75
—
—
0.85
—
—
—
—
—
—
—
—
—
—
-70
—
—
—
—
—
—
25
Min.
—
—
—
—
—
—
25
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
IP2 Two Tone, +18 dBm / Tone, 1 MHz spacing, >50 MHz dBm — 70 —
IP3 Two Tone, +18 dBm / Tone, 1 MHz spacing, >50 MHz dBm — 55 —
V1 V2
V3 ANT–
RF1
ANT -
RF2
ANT -
RF3
1 0 0 On Off Off
0 1 0 Off On Off
0 0 1 Off Off On
Truth Table 4
4. 1 = 2.7 V to 5.0 V, 0 = 0 V ± 0.2 V
Parameter Absolute Maximum
Input Power
(0.5 - 2.5 GHz, 2.7 V Control)
+36 dBm
Operating Voltage +8.5 volts
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C
Absolute Maximum Ratings 5,6
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM does not recommend sustained operation near
these survivability limits.