DK-CSR1010-10169-1A - CSR PLC

Product Overview

CSR is the industry leader for Bluetooth Smart solutions delivered

through the CSR µEnergy product family.

CSR introduces a simplified yet comprehensive development kit

for designers who need to get prototypesof their Bluetooth Smart

products up and running fast then move quickly to production.

Product Highlights

The kit provides a complete set of tools for software development,

board design and production test:

Target board with CSR uEnergy IC on reference module, USB

programming interface and interfaces for breaking out I/O to

application-specific sensors and actuators

CSR1010, CSR1011 and CSR1012 variants*

Fully licensed CSR xIDE software development environment

Example applications for popular Bluetooth Smart profiles

Example host applications for iOS and Android platforms

Datasheets for CSR µEnergy ICs

Hardware design guidelines

Manufacturing packs for module reference designs

Production test and configuration tools

The Target board is normally powered from the host USB

connection but can also be run standalone from an on-board coin

cell (not included) to allow power measurements to be made.

Kit Contents

The Starter Dev Kit contains the following components:

Target board

Mini-USB cable to connect to Host PC USB port

Setup and Quick Start Guides

CSR µEnergy Starter Dev Kit CD-ROM

CSR µEnergy® Development Kits

Starter Development Kit

Applications

Human Interface Devices including:

Keyboard

Mouse and touchpad

Remote control

Sports and Fitness devices including:

Heart rate monitor

Foot pod

Cycle speed, power and cadence

Health devices including:

Glucose meter

Ordering Information

Visit the website www.csr.com for a list of distributors and representatives [Contact > Sales Representatives] and for further information on

other related products.

Unless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned by CSR plc and/or

its affiliates. Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc. and licensed to CSR.

Other products, services and names used in this document may have been trademarked by their respective owners.

The publication of this information does not imply that any licence is granted under any patent or other rights owned by

CSR plc or its affiliates. CSR reserves the right to make technical changes to its products as part of its development

programme. While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot

accept responsibility for any errors.

Cambridge Silicon Radio Limited. Registered in England and Wales 3665875. | Churchill House, Cambridge Business

Park, Cowley Road, Cambridge CB4 0WZ

Tel: +44 1223 692000 | Fax: +44 1223 692001 | Web: www.csr.com | Blog: www.csr.com/blog | Twitter: @CSR_plc

Starter

arget

oard

Factory-fitted with CSR1010, CSR1011

or CSR1012 module

USB or CR2032 battery powered (link

selectable).

USB SPI interface to development PC

1x push-button

1x LED

1x Headers for CSR1010/CSR1012 I/O

2x Headers for CSR1011 I/O

80 x 68 mm PCB area

CSR1010 kit part no. DK-CSR1010-10169

*CSR1011 and CSR1012 kit versions are in

development.

CSR

1010

Reference Modules

Common features:

CE and FCC pre-qualified designs

FR4 PCB layout

Single-sided PCB mounting

PCB antenna and passive filter

CSR1010 Reference Module

2-layer PCB (25.5 x 18.0 mm)

CSR1011 Reference Module

2-layer PCB (35.0 x 20.0 mm)

CSR1012 Reference Module

4-layer PCB (17.7 x 7.6 mm active area)

A Daughter board featuring 5 representative

MEMS parts is in development, which will

connect to the I/O Headers of all modules.

CSR1010

CSR1012

Module

Site

CSR1011

Module

(site)

CSR µEnergy® Development Kits

Starter Development Kit

CSR

1011

CSR

1012

For tech info visit:

forum.csr.com

wiki.csr.com