1MBH08D-120 Molded IGBT 1200V / 8A Molded Package Outline drawings, mm TO-3PL Features * Small molded package * Low power loss * Soft switching with low switching surge and noise * High reliability, high ruggedness (RBSOA, SCSOA etc.) * Comprehensive line-up Applications * Inverter for Motor drive * AC and DC Servo drive amplifier * Uninterruptible power supply Maximum ratings and characteristics Absolute maximum ratings (Tc=25C) Item Collector-Emitter voltage Gate-Emitter voltaga Collector DC Tc=25C current Tc=105C 1ms Tc=25C Max. power dissipation (IGBT) Max. power dissipation (FWD) Operating temperature Storage temperature Screw torque Symbol VCES VGES IC25 IC105 Icp PC PC Tj Tstg - Rating 1200 20 15 8 39 135 85 +150 -40 to +150 70 Unit V V A A A W W C C N*m Equivalent Circuit Schematic IGBT + C:Collector FWD G:Gate E:Emitter Electrical characteristics (at Tc=25C unless otherwise specified) Item Symbol Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Collector-Emitter saturation voltage Input capacitance Output capacitance Reverse transfer capacitance Turn-on time Turn-off time Switching Time Turn-on time Turn-off time FWD forward on voltage Reverse recovery time ICES IGES VGE(th) VCE(sat) Cies Coes Cres ton tr toff tf ton tr toff tf VF trr Characteristics Min. Typ. - - 5.5 - - - - - - - - - - - - - - - - - - 1000 160 60 - - - - 0.16 0.11 0.30 - - - Conditions Unit VGE=0V, VCE=1200V VCE=0V, VGE=20V VCE=20V, IC=8mA VGE=15V, IC=8A VGE=0V V CE=10V f=1MHz VCC=600V, IC=8A VGE=15V RG=200 ohm (Half Bridge) VCC=600V, IC=8A VGE=+15V RG=20 ohm (Half Bridge) IF=8A IF=8A, VGE=-10V, VR=200V, di/dt=100A/s mA A V V pF Max. 1.0 20 8.5 3.5 - - - 1.2 0.6 1.5 0.5 - - - 0.50 3.0 0.35 s s V s Thermal resistance characteristics Item Thermal resistance Symbol Rth(j-c) Rth(j-c) Characteristics Min. Typ. - - - - Conditions Unit Max. 0.92 1.47 IGBT FWD C/W C/W 1MBH08D-120 Molded IGBT Characteristics Collector current vs. Collector-Emitter voltage Tj=125C Collector current : IC (A) Collector current : IC (A) Collector current vs. Collector-Emitter voltage Tj=25C Collector-Emitter voltage : VCE (V) Collector-Emitter voltage : VCE (V) Collector-Emitter voltage vs. Gate-Emitter voltage Tj=25C Collector-Emitter voltage vs. Gate-Emitter voltage Collector-Emitter voltage : VCE (V) Collector-Emitter voltage : VCE (V) Tj=125C Gate-Emitter voltage : VGE (V) Gate-Emitter voltage : VGE (V) Switching time vs. Collector current VCC=600V, RG=20, VGE=15V, Tj=125C Collector current : IC (A) : tf,toff, tr, ton, trr2 (nsec) Switching time Switching time : tf,toff, tr, ton, trr2 (nsec) Switching time vs. Collector current VCC=600V, RG=20, VGE=15V, Tj=25C Collector current : IC (A) IGBT Module 1MBH08D-120 Characteristics Switching time vs. RG Switching time vs. RG VCC=600V, IC=8A, VGE=15V, Tj=125C Switching time : tf,toff, tr, ton, trr2 (nsec) Switching time : tf,toff, tr, ton, trr2 (nsec) VCC=600V, IC=8A, VGE=15V, Tj=25C Gate resistance : RG () Gate resistance : RG () Capacitance : Cies, Coes, Cres (nF) Capacitance vs. Collector-Emitter voltage Tj=25C Gate-Emitter voltage : VGE (V) Collector-Emitter voltage : VCE (V) Dynamic input characteristics Tj=25C Gate charge : Qg (nc) Collector-Emitter voltage : VCE (V) Reverse Biased Safe Operating Area > +VGE=15V, -VGE < = 15V, Tj< = 125C, RG = 20 Collector-Emitter voltage : VCE (V) Short circuit time : tSC (s) Collector current : IC (A) Short circuit current : ISC (A) Typical short circuit capability VCC=800V, RG=20, Tj=125C, Gate voltage : VGE (V) 1MBH08D-120 IGBT Module Characteristics Reverse recovery current vs. Forward current VR=200V, -di/dt=100A/sec VR=200V, -di/dt=100A/sec Reverse recovery current : Irr [A] Reverse recovery time : trr [nsec] Reverse recovery time vs. Forward current Forward current : IF (A) Forward current : IF (A) Reverse recovery chracteristics vs. -di/dt Forward Voltage vs. Forward current IF=8A, Tj=125C Forward current : IF [A] Reverse recovery time : trr [nsec] Reverse recovery current : Irr [A] Forward voltage : VF (V) Thermal resistance : Rth(j-c) [C/W] Transient thermal resistance Pulse width : PW (sec) -di/dt [A/sec]