Photomicrosensor (Reflective) EE-SY113 Dimensions Features Note: All units are in millimeters unless otherwise indicated. * Compact reflective Photomicrosensor (EE-SY110) with a molded housing and a dust-tight cover. * RoHS Compliant. Absolute Maximum Ratings (Ta = 25C) Four, 0.5 Emitter Notch for directional discrimination Item Symbol Forward current IF 50 mA (see note 1) Pulse forward current IFP 1 A (see note 2) Reverse voltage VR 4V Collector-Emitter voltage VCEO 30 V Emitter-Collector voltage VECO --- Collector current IC 20 mA Collector dissipation PC 100 mW (see note 1) Ambient tem- Operating perature Storage Topr -40C to 80C Tstg -40C to 85C Soldering temperature Tsol 260C (see note 3) 2.5 Detector Four, 0.25 15 to 18 Internal Circuit A C K Terminal No. Unless otherwise specified, the tolerances are as shown below. Dimensions E Name A Anode K C Cathode Collector E Emitter Rated value Tolerance 3 mm max. 0.3 3 < mm 6 0.375 6 < mm 10 0.45 10 < mm 18 0.55 18 < mm 30 0.65 Note: 1. Refer to the temperature rating chart if the ambient temperature exceeds 25C. 2. The pulse width is 10 s maximum with a frequency of 100 Hz. 3. Complete soldering within 10 seconds. Ordering Information Description Model Photomicrosensor (reflective) EE-SY113 Electrical and Optical Characteristics (Ta = 25C) Item Emitter Detector Symbol Value Condition Forward voltage VF 1.2 V typ., 1.5 V max. IF = 30 mA Reverse current IR 0.01 A typ., 10 A max. VR = 4 V Peak emission wavelength P 940 nm typ. IF = 20 mA Light current IL 160 A min., 1,600 A max. IF = 20 mA, VCE = 10 V White paper with a reflection ratio of 90%, d = 4.4 mm (see note) Dark current ID 2 nA typ., 200 nA max. VCE = 10 V, 0 lx Leakage current ILEAK 2 A max. IF = 20 mA, VCE = 10 V with no reflection Collector-Emitter saturated voltage VCE (sat) --- --- Peak spectral sensitivity wavelength P 850 nm typ. VCE = 10 V Rising time tr 30 s typ. VCC = 5 V, RL = 1 k, IL = 1 mA Falling time tf 30 s typ. VCC = 5 V, RL = 1 k, IL = 1 mA Note: The letter "d" indicates the distance between the top surface of the sensor and the sensing object. Photomicrosensor (Reflective) EE-SY113 215 Engineering Data VCE = 10 V d = 4.4 mm Light current IL (A) Relative light current IL (%) Dark current ID (nA) Ambient temperature Ta (C) Ambient temperature Ta (C) Sensing Position Characteristics (Typical) Ta = 25C IF = 20 mA VCE = 10 V Light current IL (A) Sensing object: White paper with a reflection factor of 90% Distance d (mm) Relative light current IL (%) Sensing Distance Characteristics (Typical) IF = 20 mA VCE = 10 V Ta = 25C d1 = 4.4 mm Sensing object: White paper with a reflection factor of 90% d1 d2 Input 90 % 10 % Input Output 216 Direction Distance d2 (mm) Response Time Measurement Circuit Output Response time tr, tf (s) VCE = 10 V 0x IF = 20 mA VCE = 5 V Photomicrosensor (Reflective) EE-SY113 IF = 40 mA IF = 30 mA IF = 20 mA IF = 10 mA Response Time vs. Load Resistance Characteristics (Typical) Vcc = 5 V Ta = 25C Load resistance RL (k) Sensing Angle Characteristics (Typical) Relative light current IL (%) Forward current IF (mA) Dark Current vs. Ambient Temperature Characteristics (Typical) d = 4.4 mm Sensing object: White paper with a reflection factor of 90% Collector-Emitter voltage VCE (V) Forward current IF (mA) Ambient temperature Ta (C) Relative Light Current vs. Ambient Temperature Characteristics (Typical) Sensing object: White paper with a reflection factor of 90% Light Current vs. Collector-Emitter Voltage Characteristics (Typical) Light current IL (mA) Light Current vs. Forward Current Characteristics (Typical) Collector dissipation Pc (mW) Forward Current vs. Collector Dissipation Temperature Rating Ta = 25C VCE = 10 V IF = 20 mA d = 4.4 mm Sensing object: White paper with a reflection factor of 90% Angle deviation () MEMO Photomicrosensor (Reflective) EE-SY113 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X305-E-1 10/10 Photomicrosensor (Reflective) Specifications subject to change without notice EE-SY113 Printed in USA