DIODE(THREE PHASES BRIDGE TYPE) DF200BA40/80 UL;E76102 M Power Diode Module DF200BA is designed for three phase full wave rectification, which has six diodes connected in a three phase bridge configuration. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink Repetitive peak reverse construction. Output DC current is 200Amp Tc 102 voltage is up to 800V. TjMax 150 Isolated mounting base High reliability by unique glass passivation Applications AC, DC Motor Drive/AVR/Switching -for three phase rectification Unit a Maximum Ratings Tj 25 Symbol Item VRRM Ratings Unit DF200BA40 DF200BA80 Repetitive Peak Reverse Voltage 400 800 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 V Symbol Item ID Conditions Output Current D.C. Surge Forward Current Three Phase full wave, TC 102 1 cycle, 50/60HZ, peak value, non-repetitive It It Value for one cycle of surge current Tj Operating Junction Temperature IFSM 2 2 Tstg Storage Temperature VISO Isolation Breakdown Voltage R.M.S. Mounting Torque Ratings 200 Recommended Value 1.5 2.5 15 25 2.7 28 Terminal M5 Recommended Value 1.5 2.5 15 25 Typical Value 2.7 28 360 A A2S 150 40 125 2500 A.C. 1 minute Mounting M5 Mass A 1850/2000 17000 40 Unit V N m f B g Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. Tj 150 VFM Forward Voltage Drop, max. Tj 25 IFM 200A, Inst measurement Junction to case Rth j-c 149 Thermal Impedance, max. Conditions at VRRM http://store.iiic.cc/ Ratings Unit 20.0 mA 1.20 V 0.10 /W DF200BA40/80 http://store.iiic.cc/ 150