Product Brief
April 2003
MARS1G2 P-LT (TDAT161G2) SONET/SDH
155/622 Mbits/s Data Interface
Features
■One of the next generation system on a chip
devices of Agere Systems’ multiapplication & rate
solutions MARSTM family of framers.
■Transmission convergence and SONET/SDH ter-
minal functionality for linear networks.
■Versatile IC supports 155/622 Mbits/s SONET/
SDH interface solutions for packet over SONET
(POS), packet over fiber (POF), or asynchronous
transfer mode (ATM) applications.
■Low-power 1.6/3.3 V operation.
SONET/SDH Interface
■Termination of quad STS-3/STM-1 or dual STS-12/
STM-4.
■Supports overhead processing for transport and
path overhead bytes.
■Optional insertion and extraction of overhead bytes
via serial overhead interface.
■STS pointer processing to align the receive frame
to the system frame.
■Support for 1+1 and 1:1 linear networks.
■Full path termination and SPE extraction/insertion.
■SONET/SDH compliant condition and alarm
reporting.
■Handles all concatenation levels of STS-3c to
STS-24c (in multiples of 3: e.g., 3c, 6c, 9c, etc.).
■Built-in diagnostic loopback modes.
■Compliant with the following Telcordia Technolo-
gies®, ANSI®, and ITU standards:
— GR-253 CORE: SONET Transport Systems:
Common Generic Criteria.
— ITU-T G.707: Network Node Interface for the
Synchronous Digital Hierarchy.
— ITU-T G.803: Architecture of Transport Net-
works Based on the Synchronous Digital Hierar-
chy.
— T1.105: SONET-Basic Description including
Multiplex Structure, Rates, and Formats.
— T1.105.02 SONET-Payload Mappings.
— T1.105.03 SONET-Jitter at Network Interfaces.
— T1.105.06 SONET Physical Layer Specifica-
tions.
— T1.105.07 SONET-Sub-STS-1 Interface Rates
and Formats Specification.
— ITU-T I.432: B-ISDN User-Network Interface-
Phy sical Layer Specification.
— IETF RFC 2615: PPP over SONET/SDH.
— IETF RFC 1661: The Point-to-Point Protocol
(PPP).
— IETF RFC 1662: PPP in HDLC-like Framing.
Data Processing
■Provisionable data engine supports payload inser-
tion/extraction for PPP, ATM, or HDLC streams.
■Extraction and insertion of DS3 frames containing
HDLC or ATM datastreams for up to 16 channels.
■Integrated UTOPIA Level 2 and Level 3 compatible
physical layer interface for packets or ATM cells.
■Provides/supports internal E3 mapping.
■Supports DS3/PLCP and clear channel DS3 map-
ping.
■Insertion and extraction of up to 16 separate data
channels.
■Direct cell/packet over fiber interface device.
■Compliant with ATM forum, ITU standards, and
IET F standa rds.
Interfaces
■Enhanced UTOPIA interface for cell and packet
transfer.
■IEEE® 1149.1 port with BIST, scan, and boundry
scan.
Micropro cessor Interface
■Up to 66 MHz synchronous.
■16-bit address and 16-bit data interface.
■Synchronous or asynchronous modes available.
■Configurable to operate with most commercial
microprocessors.