APTGF25X120E2 APTGF25X120P2 3 Phase bridge NPT IGBT Power Module VCES = 1200V IC = 25A @ Tc = 80C Application * AC Motor control Features Non Punch Through (NPT) IGBT(R) - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated Kelvin emitter for easy drive Very low stray inductance High level of integration * Pin out: APTGF25X120E2 (Long pins) N- U V W P+ * * * 1 2 3 4 5 6 7 8 9 10 11 12 Benefits * * * * * * * Pin out: APTGF25X120P2 (Short pins) N- 1 2 U 3 4 V 5 6 W 7 8 9 10 P+ Stable temperature behavior Very rugged Solderable terminals for easy PCB mounting Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Easy paralleling due to positive TC of VCEsat Low profile 11 12 Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate - Emitter Voltage Maximum Power Dissipation SCSOA Short circuit Safe Operating Area TC = 25C Max ratings 1200 35 25 70 20 200 Tj = 150C 250A@1200V TC = 25C TC = 80C TC = 25C Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website - http://www.advancedpower.com http://store.iiic.cc/ 1-4 APTGF25X120E2(P2) - Rev 0 Absolute maximum ratings November, 2003 All ratings @ Tj = 25C unless otherwise specified APTGF25X120E2 APTGF25X120P2 ICES Zero Gate Voltage Collector Current VCE(on) Collector Emitter on Voltage VGE(th) IGES Gate Threshold Voltage Gate - Emitter Leakage Current Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Reverse diode ratings and characteristics Symbol Characteristic VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Test Conditions VGE = 0V, IC = 500A Tj = 25C VGE = 0V VCE = 1200V Tj = 125C Tj = 25C VGE = 15V IC = 25A Tj = 125C VGE = VCE , IC = 1mA VGE = 20V, VCE = 0V TJ TSTG TC Torque Wt Unit 65 130 400 50 600 100 Tj = 25C Tj = 125C Typ 2.3 1.8 Max 2.8 Tj = 125C 0.13 Tj = 25C 2.3 Tj = 125C 6 Min IGBT Diode Typ M5 -40 -40 -40 2 V pF 150 ns Unit V s C Max 0.6 1 2500 APT website - http://www.advancedpower.com http://store.iiic.cc/ mA Max Min RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque To Heatsink Package Weight 0.8 Unit V Typ 1650 250 110 75 4.5 Min Symbol Characteristic VISOL 0.5 2 2.5 3.1 5.5 1200 Inductive Switching (125C) VGE = 15V VBus = 600V IC = 25A RG = 47 Junction to Case Max V nA Test Conditions VGE = 0V VCE = 25V f = 1MHz Test Conditions IF = 25A VGE = 0V IF = 25A VR = 600V di/dt =800A/s IF = 25A VR = 600V di/dt =800A/s Typ 3.0 3.7 6.5 180 Thermal and package characteristics RthJC Min Unit C/W V 150 125 125 3.5 185 C November, 2003 Symbol Characteristic BVCES Collector - Emitter Breakdown Voltage N.m g 2-4 APTGF25X120E2(P2) - Rev 0 Electrical Characteristics APTGF25X120E2 APTGF25X120P2 Package outline ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT website - http://www.advancedpower.com http://store.iiic.cc/ 3-4 APTGF25X120E2(P2) - Rev 0 November, 2003 Pin out: APTGF25X120E2 (Long pins) APTGF25X120E2 APTGF25X120P2 Package outline ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website - http://www.advancedpower.com http://store.iiic.cc/ 4-4 APTGF25X120E2(P2) - Rev 0 November, 2003 Pin out: APTGF25X120P2 (Short pins)