S-808xxC Series www.sii-ic.com SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR Rev.6.1_00 (c) Seiko Instruments Inc., 2001-2011 The S-808xxC series is a series of high-precision voltage detectors developed using CMOS process. The detection voltage is fixed internally with an accuracy of 2.0%. Two output forms, Nch open-drain and CMOS output, are available. Super-low current consumption and miniature package lineup can meet demand from the portable device applications. Features * Super-low current consumption * * * * * * 1.3 A typ. (detection voltage1.4 V, at VDD = 1.5 V) 0.8 A typ. (detection voltage1.5 V, at VDD = 3.5 V) High-precision detection voltage 2.0% Operating voltage range 0.65 V to 5.0 V (detection voltage1.4 V) 0.95 V to 10.0 V (detection voltage1.5 V) Hysteresis characteristics 5% typ. Detection voltage 0.8 V to 6.0 V (0.1 V step) Output form Nch open-drain output (Active Low) CMOS output (Active Low) Lead-free, Sn 100%, halogen-free*1 *1. Refer to " Product Name Structure" for details. Applications * Battery checkers * Power failure detectors * Power monitor for portable equipments such as pagers, calculators, electronic notebooks and remote controllers. * Constant voltage power monitor for cameras, video equipments and communication devices. * Power monitor for microcomputers and reset for CPUs. Packages * * * * * SC-82AB SOT-23-5 SOT-89-3 SNT-4A TO-92 Seiko Instruments Inc. 1 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Block Diagrams 1. Nch Open-drain Output Products VDD - OUT + *1 *1 VREF VSS *1. Parasitic diode Figure 1 2. CMOS Output Products VDD *1 - OUT + *1 *1 VREF VSS *1. Parasitic diode Figure 2 2 Seiko Instruments Inc. SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Product Name Structure The detection voltage, output form and packages for S-808xxC Series can be selected at the user's request. Refer to the "1. Product Name" for the construction of the product name, "2. Package" regarding the package drawings and "3. Product Name List" for the full product names. 1. Product Name 1-1. SC-82AB, SOT-23-5, SOT-89-3, SNT-4A packages S - 808xx C x xx - xxx xx x Environmental code U: Lead-free (Sn 100%), halogen-free G: Lead-free (for details, please contact our sales office) IC direction in tape specifications*1 T2: SC-82AB, SOT-23-5, SOT-89-3 TF: SNT-4A Product code*2 Package code NB: SC-82AB MC: SOT-23-5 UA: SOT-89-3 PF: SNT-4A Output form N: Nch open-drain output (Active Low) L: CMOS output (Active Low) Detection voltage value 08 to 60 (e.g. When the detection voltage is 0.8 V, it is expressed as 08.) *1. Refer to the tape specifications at the end of this book. *2. Refer to the Table 1 and 3 in the "3. Product Name List" Seiko Instruments Inc. 3 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 1-2. TO-92 package S - 808xx C xY-x 2 -U Environmental code U: Lead-free (Sn 100%), halogen-free Packing form B: Bulk Z: Tape and ammo Package code Y: TO-92 Output form N: Nch open-drain output (Active Low) L: CMOS output (Active Low) Detection voltage value 15 to 60 (e.g. When the detection voltage is 1.5 V, it is expressed as 15.) 2. Packages Package name SC-82AB Package NP004-A-P-SD SOT-23-5 MP005-A-P-SD SOT-89-3 UP003-A-P-SD SNT-4A PF004-A-P-SD TO-92 (Bulk) YS003-D-P-SD TO-92 (Tape and ammo) YZ003-E-P-SD 4 Tape NP004-A-C-SD NP004-A-C-S1 MP005-A-C-SD UP003-A-C-SD PF004-A-C-SD YZ003-E-C-SD Drawing code Reel Zigzag Land NP004-A-R-SD MP005-A-R-SD UP003-A-R-SD PF004-A-R-SD YZ003-E-Z-SD PF004-A-L-SD Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 3. Product Name List 3-1. Nch Open-drain Output Products Table 1 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.4 V typ. 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 3.9 V2.0 % Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 4.4 0.1 V*1 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V 0.195 V SC-82AB SOT-23-5 SOT-89-3 S-80808CNNB-B9MT2x S-80809CNNB-B9NT2x S-80810CNNB-B9OT2x S-80811CNNB-B9PT2x S-80812CNNB-B9QT2x S-80813CNNB-B9RT2x S-80814CNNB-B9ST2x S-80815CNNB-B8AT2x S-80816CNNB-B8BT2x S-80817CNNB-B8CT2x S-80818CNNB-B8DT2x S-80819CNNB-B8ET2x S-80820CNNB-B8FT2x S-80821CNNB-B8GT2x S-80822CNNB-B8HT2x S-80823CNNB-B8IT2x S-80824CNNB-B8JT2x S-80825CNNB-B8KT2x S-80826CNNB-B8LT2x S-80827CNNB-B8MT2x S-80828CNNB-B8NT2x S-80829CNNB-B8OT2x S-80830CNNB-B8PT2x S-80831CNNB-B8QT2x S-80832CNNB-B8RT2x S-80833CNNB-B8ST2x S-80834CNNB-B8TT2x S-80835CNNB-B8UT2x S-80836CNNB-B8VT2x S-80837CNNB-B8WT2x S-80838CNNB-B8XT2x S-80839CNNB-B8YT2x S-80815CNMC-B8AT2x S-80816CNMC-B8BT2x S-80817CNMC-B8CT2x S-80818CNMC-B8DT2x S-80819CNMC-B8ET2x S-80820CNMC-B8FT2x S-80821CNMC-B8GT2x S-80822CNMC-B8HT2x S-80823CNMC-B8IT2x S-80824CNMC-B8JT2x S-80825CNMC-B8KT2x S-80826CNMC-B8LT2x S-80827CNMC-B8MT2x S-80828CNMC-B8NT2x S-80829CNMC-B8OT2x S-80830CNMC-B8PT2x S-80831CNMC-B8QT2x S-80832CNMC-B8RT2x S-80833CNMC-B8ST2x S-80834CNMC-B8TT2x S-80835CNMC-B8UT2x S-80836CNMC-B8VT2x S-80837CNMC-B8WT2x S-80838CNMC-B8XT2x S-80839CNMC-B8YT2x S-80815CNUA-B8AT2x S-80816CNUA-B8BT2x S-80817CNUA-B8CT2x S-80818CNUA-B8DT2x S-80819CNUA-B8ET2x S-80820CNUA-B8FT2x S-80821CNUA-B8GT2x S-80822CNUA-B8HT2x S-80823CNUA-B8IT2x S-80824CNUA-B8JT2x S-80824KNUA-D2BT2x*2 S-80825CNUA-B8KT2x S-80826CNUA-B8LT2x S-80827CNUA-B8MT2x S-80828CNUA-B8NT2x S-80829CNUA-B8OT2x S-80830CNUA-B8PT2x S-80831CNUA-B8QT2x S-80832CNUA-B8RT2x S-80833CNUA-B8ST2x S-80834CNUA-B8TT2x S-80835CNUA-B8UT2x S-80836CNUA-B8VT2x S-80837CNUA-B8WT2x S-80838CNUA-B8XT2x S-80839CNUA-B8YT2x Seiko Instruments Inc. 5 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Table 1 (2/2) Detection Hysteresis width SC-82AB SOT-23-5 SOT-89-3 voltage range (Typ.) 0.200 V S-80840CNNB-B8ZT2x S-80840CNMC-B8ZT2x S-80840CNUA-B8ZT2x 4.0 V2.0 % 0.205 V S-80841CNNB-B82T2x S-80841CNMC-B82T2x S-80841CNUA-B82T2x 4.1 V2.0 % 0.210 V S-80842CNNB-B83T2x S-80842CNMC-B83T2x S-80842CNUA-B83T2x 4.2 V2.0 % 0.215 V S-80843CNNB-B84T2x S-80843CNMC-B84T2x S-80843CNUA-B84T2x 4.3 V2.0 % 0.220 V S-80844CNNB-B85T2x S-80844CNMC-B85T2x S-80844CNUA-B85T2x 4.4 V2.0 % 0.225 V S-80845CNNB-B86T2x S-80845CNMC-B86T2x S-80845CNUA-B86T2x 4.5 V2.0 % 0.230 V S-80846CNNB-B87T2x S-80846CNMC-B87T2x S-80846CNUA-B87T2x 4.6 V2.0 % 0.10 V max. S-80846KNUA-D2CT2x*3 4.6 V 0.10 V 0.235 V S-80847CNNB-B88T2x S-80847CNMC-B88T2x S-80847CNUA-B88T2x 4.7 V2.0 % 0.240 V S-80848CNNB-B89T2x S-80848CNMC-B89T2x S-80848CNUA-B89T2x 4.8 V2.0 % 0.245 V S-80849CNNB-B9AT2x S-80849CNMC-B9AT2x S-80849CNUA-B9AT2x 4.9 V2.0 % 0.250 V S-80850CNNB-B9BT2x S-80850CNMC-B9BT2x S-80850CNUA-B9BT2x 5.0 V2.0 % 0.255 V S-80851CNNB-B9CT2x S-80851CNMC-B9CT2x S-80851CNUA-B9CT2x 5.1 V2.0 % 0.260 V S-80852CNNB-B9DT2x S-80852CNMC-B9DT2x S-80852CNUA-B9DT2x 5.2 V2.0 % 0.265 V S-80853CNNB-B9ET2x S-80853CNMC-B9ET2x S-80853CNUA-B9ET2x 5.3 V2.0 % 0.270 V S-80854CNNB-B9FT2x S-80854CNMC-B9FT2x S-80854CNUA-B9FT2x 5.4 V2.0 % 0.275 V S-80855CNNB-B9GT2x S-80855CNMC-B9GT2x S-80855CNUA-B9GT2x 5.5 V2.0 % 0.280 V S-80856CNNB-B9HT2x S-80856CNMC-B9HT2x S-80856CNUA-B9HT2x 5.6 V2.0 % 0.285 V S-80857CNNB-B9IT2x S-80857CNMC-B9IT2x S-80857CNUA-B9IT2x 5.7 V2.0 % 0.290 V S-80858CNNB-B9JT2x S-80858CNMC-B9JT2x S-80858CNUA-B9JT2x 5.8 V2.0 % 0.295 V S-80859CNNB-B9KT2x S-80859CNMC-B9KT2x S-80859CNUA-B9KT2x 5.9 V2.0 % 0.300 V S-80860CNNB-B9LT2x S-80860CNMC-B9LT2x S-80860CNUA-B9LT2x 6.0 V2.0 % *1. Describes the release voltage. *2. Refer to the Table 18 in " Electricala Characteristics for Customized Products" for electrical characteristics. *3. Refer to the Table 20 in " Electricala Characteristics for Customized Products" for electrical characteristics Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 6 Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Table 2 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.4 V typ. 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 3.9 V2.0 % 4.0 V2.0 % 4.1 V2.0 % 4.2 V2.0 % 4.3 V2.0 % 4.4 V2.0 % 4.5 V2.0 % 4.6 V2.0 % 4.6 V0.10 V 4.7 V2.0 % 4.8 V2.0 % 4.9 V2.0 % 5.0 V2.0 % 5.1 V2.0 % Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 4.4 0.1 V*2 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V 0.195 V 0.200 V 0.205 V 0.210 V 0.215 V 0.220 V 0.225 V 0.230 V 0.10 V max. 0.235 V 0.240 V 0.245 V 0.250 V 0.255 V SNT-4A TO-92*1 S-80808CNPF-B9MTFx S-80809CNPF-B9NTFx S-80810CNPF-B9OTFx S-80811CNPF-B9PTFx S-80812CNPF-B9QTFx S-80813CNPF-B9RTFx S-80814CNPF-B9STFx S-80815CNPF-B8ATFx S-80816CNPF-B8BTFx S-80817CNPF-B8CTFx S-80818CNPF-B8DTFx S-80819CNPF-B8ETFx S-80820CNPF-B8FTFx S-80821CNPF-B8GTFx S-80822CNPF-B8HTFx S-80823CNPF-B8ITFx S-80824CNPF-B8JTFx S-80825CNPF-B8KTFx S-80826CNPF-B8LTFx S-80827CNPF-B8MTFx S-80828CNPF-B8NTFx S-80829CNPF-B8OTFx S-80830CNPF-B8PTFx S-80831CNPF-B8QTFx S-80832CNPF-B8RTFx S-80833CNPF-B8STFx S-80834CNPF-B8TTFx S-80835CNPF-B8UTFx S-80836CNPF-B8VTFx S-80837CNPF-B8WTFx S-80838CNPF-B8XTFx S-80839CNPF-B8YTFx S-80840CNPF-B8ZTFx S-80841CNPF-B82TFx S-80842CNPF-B83TFx S-80843CNPF-B84TFx S-80844CNPF-B85TFx S-80845CNPF-B86TFx S-80846CNPF-B87TFx S-80847CNPF-B88TFx S-80848CNPF-B89TFx S-80849CNPF-B9ATFx S-80850CNPF-B9BTFx S-80851CNPF-B9CTFx S-80815CNY-n2-U S-80816CNY-n2-U S-80817CNY-n2-U S-80818CNY-n2-U S-80819CNY-n2-U S-80820CNY-n2-U S-80821CNY-n2-U S-80822CNY-n2-U S-80823CNY-n2-U S-80824CNY-n2-U S-80824KNY-n2-U*3 S-80825CNY-n2-U S-80826CNY-n2-U S-80827CNY-n2-U S-80828CNY-n2-U S-80829CNY-n2-U S-80830CNY-n2-U S-80831CNY-n2-U S-80832CNY-n2-U S-80833CNY-n2-U S-80834CNY-n2-U S-80835CNY-n2-U S-80836CNY-n2-U S-80837CNY-n2-U S-80838CNY-n2-U S-80839CNY-n2-U S-80840CNY-n2-U S-80841CNY-n2-U S-80842CNY-n2-U S-80843CNY-n2-U S-80844CNY-n2-U S-80845CNY-n2-U S-80846CNY-n2-U S-80846KNY-n2-U*4 S-80847CNY-n2-U S-80848CNY-n2-U S-80849CNY-n2-U S-80850CNY-n2-U S-80851CNY-n2-U Seiko Instruments Inc. 7 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Table 2 (2/2) Detection Hysteresis width SNT-4A TO-92*1 voltage range (Typ.) 0.260 V S-80852CNPF-B9DTFx S-80852CNY-n2-U 5.2 V2.0 % 0.265 V S-80853CNPF-B9ETFx S-80853CNY-n2-U 5.3 V2.0 % 0.270 V S-80854CNPF-B9FTFx S-80854CNY-n2-U 5.4 V2.0 % 0.275 V S-80855CNPF-B9GTFx S-80855CNY-n2-U 5.5 V2.0 % 0.280 V S-80856CNPF-B9HTFx S-80856CNY-n2-U 5.6 V2.0 % 0.285 V S-80857CNPF-B9ITFx S-80857CNY-n2-U 5.7 V2.0 % 0.290 V S-80858CNPF-B9JTFx S-80858CNY-n2-U 5.8 V2.0 % 0.295 V S-80859CNPF-B9KTFx S-80859CNY-n2-U 5.9 V2.0 % 0.300 V S-80860CNPF-B9LTFx S-80860CNY-n2-U 6.0 V2.0 % *1. n changes according to the packing form in TO-92. B: Bulk, Z: Tape and ammo *2. Describes the release voltage. *3. Refer to the Table 18 in " Electricala Characteristics for Customized Products" for electrical characteristics. *4. Refer to the Table 20 in " Electricala Characteristics for Customized Products" for electrical characteristics. Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 8 Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 3-2. CMOS Output Products Table 3 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 3.9 V2.0 % 4.0 V2.0 % 4.1 V2.0 % 4.2 V2.0 % 4.3 V2.0 % 4.4 V2.0 % 4.45 V typ. 4.5 V2.0 % 4.6 V2.0 % 4.7 V2.0 % 4.8 V2.0 % 4.9 V2.0 % 5.0 V2.0 % 5.1 V2.0 % Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V 0.195 V 0.200 V 0.205 V 0.210 V 0.215 V 0.220 V 4.70 V max.*1 0.225 V 0.230 V 0.235 V 0.240 V 0.245 V 0.250 V 0.255 V SC-82AB SOT-23-5 SOT-89-3 S-80808CLNB-B7MT2x S-80809CLNB-B7NT2x S-80810CLNB-B7OT2x S-80811CLNB-B7PT2x S-80812CLNB-B7QT2x S-80813CLNB-B7RT2x S-80814CLNB-B7ST2x S-80815CLNB-B6AT2x S-80816CLNB-B6BT2x S-80817CLNB-B6CT2x S-80818CLNB-B6DT2x S-80819CLNB-B6ET2x S-80820CLNB-B6FT2x S-80821CLNB-B6GT2x S-80822CLNB-B6HT2x S-80823CLNB-B6IT2x S-80824CLNB-B6JT2x S-80825CLNB-B6KT2x S-80826CLNB-B6LT2x S-80827CLNB-B6MT2x S-80828CLNB-B6NT2x S-80829CLNB-B6OT2x S-80830CLNB-B6PT2x S-80831CLNB-B6QT2x S-80832CLNB-B6RT2x S-80833CLNB-B6ST2x S-80834CLNB-B6TT2x S-80835CLNB-B6UT2x S-80836CLNB-B6VT2x S-80837CLNB-B6WT2x S-80838CLNB-B6XT2x S-80839CLNB-B6YT2x S-80840CLNB-B6ZT2x S-80841CLNB-B62T2x S-80842CLNB-B63T2x S-80843CLNB-B64T2x S-80844CLNB-B65T2x S-80845CLNB-B66T2x S-80846CLNB-B67T2x S-80847CLNB-B68T2x S-80848CLNB-B69T2x S-80849CLNB-B7AT2x S-80850CLNB-B7BT2x S-80851CLNB-B7CT2x S-80815CLMC-B6AT2x S-80816CLMC-B6BT2x S-80817CLMC-B6CT2x S-80818CLMC-B6DT2x S-80819CLMC-B6ET2x S-80820CLMC-B6FT2x S-80821CLMC-B6GT2x S-80822CLMC-B6HT2x S-80823CLMC-B6IT2x S-80824CLMC-B6JT2x S-80825CLMC-B6KT2x S-80826CLMC-B6LT2x S-80827CLMC-B6MT2x S-80828CLMC-B6NT2x S-80829CLMC-B6OT2x S-80830CLMC-B6PT2x S-80831CLMC-B6QT2x S-80832CLMC-B6RT2x S-80833CLMC-B6ST2x S-80834CLMC-B6TT2x S-80835CLMC-B6UT2x S-80836CLMC-B6VT2x S-80837CLMC-B6WT2x S-80838CLMC-B6XT2x S-80839CLMC-B6YT2x S-80840CLMC-B6ZT2x S-80841CLMC-B62T2x S-80842CLMC-B63T2x S-80843CLMC-B64T2x S-80844CLMC-B65T2x S-80845CLMC-B66T2x S-80846CLMC-B67T2x S-80847CLMC-B68T2x S-80848CLMC-B69T2x S-80849CLMC-B7AT2x S-80850CLMC-B7BT2x S-80851CLMC-B7CT2x S-80815CLUA-B6AT2x S-80816CLUA-B6BT2x S-80817CLUA-B6CT2x S-80818CLUA-B6DT2x S-80819CLUA-B6ET2x S-80820CLUA-B6FT2x S-80821CLUA-B6GT2x S-80822CLUA-B6HT2x S-80823CLUA-B6IT2x S-80824CLUA-B6JT2x S-80825CLUA-B6KT2x S-80826CLUA-B6LT2x S-80827CLUA-B6MT2x S-80828CLUA-B6NT2x S-80829CLUA-B6OT2x S-80830CLUA-B6PT2x S-80831CLUA-B6QT2x S-80832CLUA-B6RT2x S-80833CLUA-B6ST2x S-80834CLUA-B6TT2x S-80835CLUA-B6UT2x S-80836CLUA-B6VT2x S-80837CLUA-B6WT2x S-80838CLUA-B6XT2x S-80839CLUA-B6YT2x S-80840CLUA-B6ZT2x S-80841CLUA-B62T2x S-80842CLUA-B63T2x S-80843CLUA-B64T2x S-80844CLUA-B65T2x S-80844KLUA-D2AT2x*2 S-80845CLUA-B66T2x S-80846CLUA-B67T2x S-80847CLUA-B68T2x S-80848CLUA-B69T2x S-80849CLUA-B7AT2x S-80850CLUA-B7BT2x S-80851CLUA-B7CT2x Seiko Instruments Inc. 9 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Table 3 (2/2) Detection Hysteresis width SC-82AB SOT-23-5 SOT-89-3 voltage range (Typ.) 0.260 V S-80852CLNB-B7DT2x S-80852CLMC-B7DT2x S-80852CLUA-B7DT2x 5.2 V2.0 % 0.265 V S-80853CLNB-B7ET2x S-80853CLMC-B7ET2x S-80853CLUA-B7ET2x 5.3 V2.0 % 0.270 V S-80854CLNB-B7FT2x S-80854CLMC-B7FT2x S-80854CLUA-B7FT2x 5.4 V2.0 % 0.275 V S-80855CLNB-B7GT2x S-80855CLMC-B7GT2x S-80855CLUA-B7GT2x 5.5 V2.0 % 0.280 V S-80856CLNB-B7HT2x S-80856CLMC-B7HT2x S-80856CLUA-B7HT2x 5.6 V2.0 % 0.285 V S-80857CLNB-B7IT2x S-80857CLMC-B7IT2x S-80857CLUA-B7IT2x 5.7 V2.0 % 0.290 V S-80858CLNB-B7JT2x S-80858CLMC-B7JT2x S-80858CLUA-B7JT2x 5.8 V2.0 % 0.295 V S-80859CLNB-B7KT2x S-80859CLMC-B7KT2x S-80859CLUA-B7KT2x 5.9 V2.0 % 0.300 V S-80860CLNB-B7LT2x S-80860CLMC-B7LT2x S-80860CLUA-B7LT2x 6.0 V2.0 % *1. Describes the release voltage. *2. Refer to the Table 19 in " Electricala Characteristics for Customized Products" for electrical characteristics. Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. Table 4 (1/2) Detection voltage range 0.8 V2.0 % 0.9 V2.0 % 1.0 V2.0 % 1.1 V2.0 % 1.2 V2.0 % 1.3 V2.0 % 1.4 V2.0 % 1.5 V2.0 % 1.6 V2.0 % 1.7 V2.0 % 1.8 V2.0 % 1.9 V2.0 % 2.0 V2.0 % 2.1 V2.0 % 2.2 V2.0 % 2.3 V2.0 % 2.4 V2.0 % 2.5 V2.0 % 2.6 V2.0 % 2.7 V2.0 % 2.8 V2.0 % 2.9 V2.0 % 3.0 V2.0 % 3.1 V2.0 % 3.2 V2.0 % 3.3 V2.0 % 3.4 V2.0 % 3.5 V2.0 % 3.6 V2.0 % 3.7 V2.0 % 3.8 V2.0 % 10 Hysteresis width (Typ.) 0.034 V 0.044 V 0.054 V 0.064 V 0.073 V 0.083 V 0.093 V 0.075 V 0.080 V 0.085 V 0.090 V 0.095 V 0.100 V 0.105 V 0.110 V 0.115 V 0.120 V 0.125 V 0.130 V 0.135 V 0.140 V 0.145 V 0.150 V 0.155 V 0.160 V 0.165 V 0.170 V 0.175 V 0.180 V 0.185 V 0.190 V SNT-4A TO-92*1 S-80808CLPF-B7MTFx S-80809CLPF-B7NTFx S-80810CLPF-B7OTFx S-80811CLPF-B7PTFx S-80812CLPF-B7QTFx S-80813CLPF-B7RTFx S-80814CLPF-B7STFx S-80815CLPF-B6ATFx S-80816CLPF-B6BTFx S-80817CLPF-B6CTFx S-80818CLPF-B6DTFx S-80819CLPF-B6ETFx S-80820CLPF-B6FTFx S-80821CLPF-B6GTFx S-80822CLPF-B6HTFx S-80823CLPF-B6ITFx S-80824CLPF-B6JTFx S-80825CLPF-B6KTFx S-80826CLPF-B6LTFx S-80827CLPF-B6MTFx S-80828CLPF-B6NTFx S-80829CLPF-B6OTFx S-80830CLPF-B6PTFx S-80831CLPF-B6QTFx S-80832CLPF-B6RTFx S-80833CLPF-B6STFx S-80834CLPF-B6TTFx S-80835CLPF-B6UTFx S-80836CLPF-B6VTFx S-80837CLPF-B6WTFx S-80838CLPF-B6XTFx S-80815CLY-n2-U S-80816CLY-n2-U S-80817CLY-n2-U S-80818CLY-n2-U S-80819CLY-n2-U S-80820CLY-n2-U S-80821CLY-n2-U S-80822CLY-n2-U S-80823CLY-n2-U S-80824CLY-n2-U S-80825CLY-n2-U S-80826CLY-n2-U S-80827CLY-n2-U S-80828CLY-n2-U S-80829CLY-n2-U S-80830CLY-n2-U S-80831CLY-n2-U S-80832CLY-n2-U S-80833CLY-n2-U S-80834CLY-n2-U S-80835CLY-n2-U S-80836CLY-n2-U S-80837CLY-n2-U S-80838CLY-n2-U Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Table 4 (2/2) Detection Hysteresis width SNT-4A TO-92*1 voltage range (Typ.) 0.195 V S-80839CLPF-B6YTFx S-80839CLY-n2-U 3.9 V2.0 % 0.200 V S-80840CLPF-B6ZTFx S-80840CLY-n2-U 4.0 V2.0 % 0.205 V S-80841CLPF-B62TFx S-80841CLY-n2-U 4.1 V2.0 % 0.210 V S-80842CLPF-B63TFx S-80842CLY-n2-U 4.2 V2.0 % 0.215 V S-80843CLPF-B64TFx S-80843CLY-n2-U 4.3 V2.0 % 0.220 V S-80844CLPF-B65TFx S-80844CLY-n2-U 4.4 V2.0 % *2 S-80844KLY-n2-U*3 4.45 V typ. 4.70 V max. 0.225 V S-80845CLPF-B66TFx S-80845CLY-n2-U 4.5 V2.0 % 0.230 V S-80846CLPF-B67TFx S-80846CLY-n2-U 4.6 V2.0 % 0.235 V S-80847CLPF-B68TFx S-80847CLY-n2-U 4.7 V2.0 % 0.240 V S-80848CLPF-B69TFx S-80848CLY-n2-U 4.8 V2.0 % 0.245 V S-80849CLPF-B7ATFx S-80849CLY-n2-U 4.9 V2.0 % 0.250 V S-80850CLPF-B7BTFx S-80850CLY-n2-U 5.0 V2.0 % 0.255 V S-80851CLPF-B7CTFx S-80851CLY-n2-U 5.1 V2.0 % 0.260 V S-80852CLPF-B7DTFx S-80852CLY-n2-U 5.2 V2.0 % 0.265 V S-80853CLPF-B7ETFx S-80853CLY-n2-U 5.3 V2.0 % 0.270 V S-80854CLPF-B7FTFx S-80854CLY-n2-U 5.4 V2.0 % 0.275 V S-80855CLPF-B7GTFx S-80855CLY-n2-U 5.5 V2.0 % 0.280 V S-80856CLPF-B7HTFx S-80856CLY-n2-U 5.6 V2.0 % 0.285 V S-80857CLPF-B7ITFx S-80857CLY-n2-U 5.7 V2.0 % 0.290 V S-80858CLPF-B7JTFx S-80858CLY-n2-U 5.8 V2.0 % 0.295 V S-80859CLPF-B7KTFx S-80859CLY-n2-U 5.9 V2.0 % 0.300 V S-80860CLPF-B7LTFx S-80860CLY-n2-U 6.0 V2.0 % *1. n changes according to the packing form in TO-92. B: Bulk, Z: Tape and ammo *2. Describes the release voltage. *3. Refer to the Table 19 in " Electricala Characteristics for Customized Products" for electrical characteristics. Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. Seiko Instruments Inc. 11 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Output Forms 1. Output Forms in S-808xxC Series Table 5 Nch open-drain output products (Active Low) "N" is the last letter of the product name. e.g. S-80815CN S-808xxC Series CMOS output products (Active Low) "L" is the last letter of the product name. e.g. S-80815CL 2. Output Forms and Their Usage Table 6 Usage Nch open-drain output products CMOS output products (Active Low) (Active Low) Different power supplies Yes No Active Low reset for CPUs Yes Yes Active High reset for CPUs No No Detection voltage change by resistor divider Yes No * Example for two power supplies VDD1 VDD2 V/D Nch VSS OUT CPU * Example for one power supply VDD VDD V/D CMOS OUT CPU VSS VSS Figure 3 12 V/D Nch Seiko Instruments Inc. OUT CPU SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Pin Configurations Table 7 SC-82AB Top view 4 3 1 Pin No. Symbol Description 1 OUT Voltage detection output pin 2 VDD Voltage input pin 3 NC*1 No connection 4 VSS GND pin *1. The NC pin is electrically open. The NC pin can be connected to VDD or VSS. 2 Figure 4 Table 8 SOT-23-5 Top view 5 1 Pin No. Symbol Description 1 OUT Voltage detection output pin 2 VDD Voltage input pin 3 VSS GND pin 4 NC*1 No connection 5 NC*1 No connection *1. The NC pin is electrically open. The NC pin can be connected to VDD or VSS. 4 2 3 Figure 5 Table 9 SOT-89-3 Top view 1 2 Pin No. 1 2 3 Symbol OUT VDD VSS Description Voltage detection output pin Voltage input pin GND pin 3 Figure 6 Table10 SNT-4A Top view 1 4 2 3 Pin No. Symbol Description 1 OUT Voltage detection output pin 2 VSS GND pin 3 NC*1 No connection 4 VDD Voltage input pin *1. The NC pin is electrically open. The NC pin can be connected to VDD or VSS. Figure 7 Seiko Instruments Inc. 13 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series TO-92 Bottom view 1 2 3 Table 11 Pin No. 1 2 3 Figure 8 14 Rev.6.1_00 Seiko Instruments Inc. Symbol OUT VDD VSS Description Voltage detection output pin Voltage input pin GND pin Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Absolute Maximum Ratings 1. Detection Voltage Typ. 1.4 V or Less Products Table 12 Item Power supply voltage Output voltage Nch open-drain output products CMOS output products Output current Power SC-82AB dissipation SNT-4A Symbol VDD-VSS VOUT IOUT PD Operating ambient temperature Topr Storage temperature Tstg *1. When mounted on board [Mounted board] (1) Board size: 114.3 mm x 76.2 mm x t1.6 mm (2) Board name: JEDEC STANDARD51-7 (Ta = 25 C unless otherwise specified) Absolute maximum ratings Unit 7 V V VSS-0.3 to VSS+7 V VSS-0.3 to VDD+0.3 50 mA 150 (When not mounted on board) mW 350*1 mW 140 (When not mounted on board) mW mW 300*1 -40 to +85 C -40 to +125 C Power Dissipation PD (mW) Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 500 400 SC-82AB 300 200 SNT-4A 100 0 0 50 100 150 Ambient Temperature Ta (C) Figure 9 Power Dissipation of Package (When Mounted on Board) Seiko Instruments Inc. 15 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 2. Detection Voltage Typ. 1.5 V or More Products Table 13 Item Power supply voltage Output voltage Nch open-drain output products CMOS output products Output current Power SC-82AB dissipation SOT-23-5 Symbol VDD-VSS VOUT IOUT PD SOT-89-3 SNT-4A TO-92 Operating ambient temperature Topr Storage temperature Tstg *1. When mounted on board [Mounted board] (1) Board size: 114.3 mm x 76.2 mm x t1.6 mm (2) Board name: JEDEC STANDARD51-7 (Ta = 25 C unless otherwise specified) Absolute maximum ratings Unit 12 V V VSS-0.3 to VSS+12 V VSS-0.3 to VDD+0.3 50 mA 150 (When not mounted on board) mW 350*1 mW 250 (When not mounted on board) mW 600*1 mW 500 (When not mounted on board) mW 1000*1 mW 140 (When not mounted on board) mW 300*1 mW 400 (When not mounted on board) mW mW 800*1 -40 to +85 C -40 to +125 C Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation PD (mW) 1200 SOT-89-3 1000 TO-92 800 SOT-23-5 600 SC-82AB 400 200 SNT-4A 0 0 50 100 150 Ambient Temperature Ta (C) Figure 10 Power Dissipation of Package (When Mounted on Board) 16 Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Electrical Characteristics 1. Nch Open-drain Output Products 1-1. Detection Voltage Typ.1.4 V or Less Products Table 14 Item Symbol Condition Detection voltage*1 -VDET Release voltage +VDET Hysteresis width VHYS Current consumption ISS Operating voltage VDD Output current IOUT Leakage current ILEAK Response time tPLH S-80808 S-80809 S-80810 S-80811 S-80812 S-80813 S-80814 S-80808 S-80809 S-80810 S-80811 S-80812 S-80813 S-80814 VDD = 1.5 V VDD = 2.0 V S-80808 to 09 S-80810 to 14 Output transistor, Nch, VDS = 0.5 V, VDD = 0.7 V Output transistor, Nch, VDS = 5.0 V, VDD = 5.0 V (Ta = 25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit -VDET(S) -VDET(S) -VDET(S) V 1 x0.98 x1.02 V 1 0.802 0.834 0.867 V 1 0.910 0.944 0.979 V 1 1.017 1.054 1.091 V 1 1.125 1.164 1.203 V 1 1.232 1.273 1.315 V 1 1.340 1.383 1.427 V 1 1.448 1.493 1.538 V 1 0.018 0.034 0.051 V 1 0.028 0.044 0.061 V 1 0.037 0.054 0.071 V 1 0.047 0.064 0.081 V 1 0.056 0.073 0.091 V 1 0.066 0.083 0.101 V 1 0.076 0.093 0.110 1.3 3.5 2 A 1.3 3.5 2 A 0.65 5.0 V 1 0.04 0.2 mA 3 60 nA 3 60 s 1 Detection voltage - VDET ppm/ 1 temperature Ta = -40 to +85 C 100 350 C *2 Ta * - V DET coefficient *1. -VDET: Actual detection voltage value, -VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 1 to 2.) *2. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = - VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient Seiko Instruments Inc. 17 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 1-2. Detection Voltage Typ.1.5 V or More Products Table 15 Item Symbol Condition Detection voltage*1 -VDET Hysteresis width VHYS Current consumption ISS Operating voltage Output current VDD IOUT Leakage current ILEAK VDD = 3.5 V VDD = 4.5 V VDD = 6.0 V VDD = 7.5 V S-80815 to 26 S-80827 to 39 S-80840 to 56 S-80857 to 60 Output transistor, VDD = 1.2 V Nch, VDS = 0.5 V S-80815 to 60 VDD = 2.4 V S-80827 to 60 Output transistor, Nch, VDS = 10.0 V, VDD = 10.0 V (Ta = 25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit -VDET(S) -VDET(S) -VDET(S) V 1 x0.98 x1.02 -VDET -VDET -VDET V 1 x0.03 x0.05 x0.08 0.8 2.4 2 A 2 0.8 2.4 A 2 0.9 2.7 A 2 0.9 2.7 A 0.95 10.0 V 1 0.59 1.36 mA 3 2.88 4.98 mA 3 100 nA 3 Response time tPLH 60 1 s Detection voltage - VDET ppm/ 1 temperature Ta = -40 to +85 C 100 350 C Ta * - VDET coefficient*2 *1. -VDET: Actual detection voltage value, -VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 1 to 2.) *2. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = - VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 18 Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 2. CMOS Output Products 2-1. Detection Voltage Typ.1.4 V or Less Products Table 16 Item Symbol Detection voltage*1 -VDET Release voltage +VDET Hysteresis width VHYS Current consumption ISS Operating voltage Output current VDD IOUT (Ta = 25 C unless otherwise specified) Test Condition Min. Typ. Max. Unit circuit -VDET(S) -VDET(S) -VDET(S) V 1 x0.98 x1.02 S-80808 0.802 0.834 0.867 V 1 S-80809 0.910 0.944 0.979 V 1 S-80810 1.017 1.054 1.091 V 1 S-80811 1.125 1.164 1.203 V 1 S-80812 1.232 1.273 1.315 V 1 S-80813 1.340 1.383 1.427 V 1 S-80814 1.448 1.493 1.538 V 1 S-80808 0.018 0.034 0.051 V 1 S-80809 0.028 0.044 0.061 V 1 S-80810 0.037 0.054 0.071 V 1 S-80811 0.047 0.064 0.081 V 1 S-80812 0.056 0.073 0.091 V 1 S-80813 0.066 0.083 0.101 V 1 S-80814 0.076 0.093 0.110 V 1 S-80808 to 09 1.3 3.5 2 A VDD = 1.5 V S-80810 to 14 1.3 3.5 2 A VDD = 2.0 V 0.65 5.0 V 1 Output transistor, 0.04 0.2 mA 3 Nch, VDS = 0.5 V, VDD = 0.7 V Output transistor, 2.9 5.8 mA 4 Pch, VDS = 2.1 V, VDD = 4.5 V 60 1 s Response time tPLH Detection voltage - VDET ppm/ 1 temperature Ta = -40 to +85 C 100 350 C *2 Ta * - V DET coefficient *1. -VDET: Actual detection voltage value, -VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 3 to 4.) *2. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = - VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient Seiko Instruments Inc. 19 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 2-2. Detection Voltage Typ.1.5 V or More Products Table 17 Item Symbol Condition Detection voltage*1 -VDET Hysteresis width VHYS Current consumption ISS Operating voltage Output current VDD IOUT VDD = 3.5 V VDD = 4.5 V VDD = 6.0 V VDD = 7.5 V S-80815 to 26 S-80827 to 39 S-80840 to 56 S-80857 to 60 Output transistor, VDD = 1.2 V Nch, VDS = 0.5 V S-80815 to 60 VDD = 2.4 V S-80827 to 60 Output transistor, VDD = 4.8 V Pch, VDS = 0.5 V S-80815 to 39 VDD = 6.0 V S-80840 to 56 VDD = 8.4 V S-80857 to 60 (Ta = 25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit -VDET(S) -VDET(S) -VDET(S) V 1 x0.98 x1.02 -VDET -VDET -VDET V 1 x0.03 x0.05 x0.08 0.8 2.4 2 A 0.8 2.4 2 A 0.9 2.7 2 A 0.9 2.7 2 A 0.95 10.0 V 1 0.59 1.36 mA 3 2.88 4.98 mA 3 1.43 2.39 mA 4 1.68 2.78 mA 4 2.08 3.42 mA 4 Response time tPLH 60 1 s Detection voltage - VDET ppm/ temperature 1 Ta = -40 to +85 C 100 350 C *2 Ta * - V DET coefficient *1. -VDET: Actual detection voltage value, -VDET(S): Specified detection voltage value (The center value of the detection voltage range in Table 3 to 4.) *2. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = -VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 20 Seiko Instruments Inc. SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Test Circuits 1. VDD *1 VDD S-808xxC V R 100 k OUT Series V VSS *1. R is unnecessary for CMOS output products. Figure 11 2. A VDD VDD S-808xxC OUT Series VSS Figure 12 3. VDD VDD S-808xxC V OUT A Series VSS VDS V Figure 13 4. VDS VDD VDD S-808xxC V V OUT A Series VSS Figure 14 Seiko Instruments Inc. 21 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Timing Chart 1. Nch Open-drain Output Products VDD Release voltage (+VDET) Detection voltage (-VDET) Hysteresis width (VHYS) Minimum operating voltage VSS R 100 k VDD OUT VSS VDD V Output from the OUT pin VSS Figure 15 2. CMOS Output Products VDD Release voltage (+VDET) Detection voltage (-VDET) Hysteresis width (VHYS) Minimum operating voltage VSS VDD OUT VSS VDD V Output from the OUT pin VSS Remark For values of VDD less than minimum operating voltage, values of OUT terminal output is free in the shaded region. Figure 16 22 Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Operation 1. Basic Operation: CMOS Output (Active Low) 1-1. When the power supply voltage (VDD) is higher than the release voltage (+VDET), the Nch transistor is OFF and the Pch transistor is ON to provide VDD (high) at the output. Since the Nch transistor N1 in (RB + RC) * VDD Figure 17 is OFF, the comparator input voltage is . RA + RB + RC 1-2. When the VDD goes below +VDET, the output provides the VDD level, as long as the VDD remains above the detection voltage -VDET. When the VDD falls below -VDET (point A in Figure 18), the Nch transistor becomes ON, the Pch transistor becomes OFF, and the VSS level appears at the output. At this time the Nch transistor N1 in Figure 17 becomes ON, the comparator input voltage is changed to RB * VDD . RA + RB 1-3. When the VDD falls below the minimum operating voltage, the output becomes undefined, or goes to the VDD when the output is pulled up to the VDD. 1-4. The VSS level appears when the VDD rises above the minimum operating voltage. The VSS level still appears even when the VDD surpasses -VDET, as long as it does not exceed the release voltage +VDET. 1-5. When the VDD rises above +VDET (point B in Figure 18), the Nch transistor becomes OFF and the Pch transistor becomes ON to provide VDD level at the output. VDD *1 - RA *1 Pch OUT + *1 RB Nch VREF RC VSS N1 *1. Parasiteic diode Figure 17 Operation 1 Seiko Instruments Inc. 23 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series (1) (2) (3) (4) B A Hysteresis width (VHYS) Rev.6.1_00 (5) VDD Release voltage (+VDET) Detection voltage (-VDET) Minimum operating voltage VSS VDD Output from the OUT pin VSS Figure 18 Operation 2 2. Other Characteristics 2-1. Temperature Characteristics of Detection Voltage The shaded area in Figure 19 shows the temperature characteristics of the detection voltage. -VDET [V] +0.945 mV/C -VDET25 *1 -0.945 mV/C -40 25 85 Ta [C] *1. -VDET25 is an actual detection voltage value at 25C. Figure 19 Temperature Characteristics of Detection Voltage (Example for S-80827C) 2-2. Temperature Characteristics of Release Voltage The temperature change + VDET of the release voltage is calculated by using the temperature Ta - VDET of the detection voltage as follows: Ta + VDET + VDET - VDET = x Ta - VDET Ta The temperature change of the release voltage and the detection voltage have the same sign consequently. chnange 24 Seiko Instruments Inc. Rev.6.1_00 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series 2-3. Temperature Characteristics of Hysteresis Voltage The temperature change of the hysteresis voltage is expressed as + VDET - VDET - and is calculated Ta Ta as follows: + VDET - VDET VHYS - VDET - = x Ta Ta - VDET Ta Standard Circuit R*1 100 k VDD OUT VSS *1. R is unnecessary for CMOS output products. Figure 20 Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants. Technical Terms 1. Detection Voltage (-VDET), Release Voltage (+VDET) The detection voltage (-VDET) is a voltage at which the output turns to low. The detection voltage varies slightly among products of the same specification. The variation of detection voltage between the specified minimum (-VDET) Min. and the maximum (-VDET) Max. is called the detection voltage range (Refer to Figure 21). Example: For the S-80815CN, the detection voltage lies in the range of 1.470(-VDET)1.530. This means that some S-80815CNs have 1.470 V for -VDET and some have 1.530 V. The release voltage (+VDET) is a voltage at which the output turns to high. The release voltage varies slightly among products of the same specification. The variation of release voltages between the specified minimum (+VDET) Min. and the maximum (+VDET) Max. is called the release voltage range (Refer to Figure 22). The range is calculed from the actual detection voltage (-VDET) of a product and is expressed by -VDETx1.03+VDET-VDET x1.08. Example: For the S-80815CN, the release voltage lies in the range of 1.514(+VDET)1.652. This means that some S-80815CNs have 1.514 V for +VDET and some have 1.652 V. Seiko Instruments Inc. 25 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series VDD Detection voltage (-VDET) Max. Detection voltage range (-VDET) Min. Rev.6.1_00 VDD Release voltage (+VDET) Max. Release voltage range (+VDET) Min. OUT OUT Figure 21 Detection Voltage (CMOS Output Products) Figure 22 Release Voltage (CMOS Output Products) Remark Although the detection voltage and release voltage overlap in the range of 1.514 V to 1.530 V, +VDET is always larger than -VDET. 2. Hysteresis Width (VHYS) The hysteresis width is the voltage difference between the detection voltage and the release voltage (The voltage at point B -The voltage at point A =VHYS in Figure 18). The existence of the hysteresis width prevents malfunction caused by noise on input signal. 3. Through-type Current The through-type current refers to the current that flows instantaneously at the time of detection and release of a voltage detector. The through-type current is large in CMOS output products, small in Nch open-drain output products. 4. Oscillation In applications where a resistor is connected to the voltage detector input (Figure 23), taking a CMOS active low product for example, the through-type current which is generated when the output goes from low to high (release) causes a voltage drop equal to [through-type current]x[input resistance] across the resistor. When the input voltage drops below the detection voltage (-VDET) as a result, the output voltage goes to low level. In this state, the through-type current stops and its resultant voltage drop disappears, and the output goes from low to high. A through-type current is again generated, a voltage drop appears, and repeating the process finally induces oscillation. VDD RA VIN S-808xxCL OUT RB VSS Figure 23 An Example for Bad Implementation of Input Voltage Divider 26 Seiko Instruments Inc. SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Electrical Characteristics for Customized Products 1. S-80824KNUA-D2BT2x, S-80824KNY-n2-U Table 18 Item Symbol *1 Detection voltage Release voltage Current consumption Operating voltage Output current -VDET +VDET ISS VDD IOUT Leakage current ILEAK (Ta = 25 C unless otherwise specified) Test Condition Min. Typ. Max. Unit circuit 2.295 2.400*2 2.505 V 1 4.300 4.400 4.500 V 1 0.8 2.4 2 A VDD=6.0 V 0.95 10.0 V 1 0.24 mA 3 Output transistor, VDD = 0.95 V 0.03 Nch, VDS = 0.5 V VDD = 1.2 V 0.23 0.50 mA 3 Output transistor, 0.1 3 A Nch, VDD = 10.0 V, VDS = 10.0 V 60 1 s Response time tPLH Detection voltage - VDET 1 temperature Ta = -40 to 85 C 100 350 ppm/C Ta * - VDET coefficient*3 *1. -VDET: Actual detection voltage value *2. Specified detection voltage value (-VDET(S)) *3. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = -VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient Seiko Instruments Inc. 27 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 2. S-80844KLUA-D2AT2x, S-80844KLY-n2-U Table 19 Item Symbol *1 Detection voltage Release voltage Current consumption Operating voltage Output current -VDET +VDET ISS VDD IOUT (Ta = 25 C unless otherwise specified) Test Condition Min. Typ. Max. Unit circuit 4.295 4.450*2 4.605 V 1 4.700 V 1 1.0 3.0 2 A VDD = 6.0 V 0.95 10.0 V 1 0.50 mA 3 Output transistor, VDD = 1.2 V 0.23 Nch, VDS = 0.5 V VDD = 2.4 V 1.60 3.70 mA 3 Output transistor, 0.62 mA 4 VDD = 4.8 V 0.36 Pch, VDS = 0.5 V 60 1 s Response time tPLH Detection voltage - VDET 1 temperature Ta = -40 to 85 C 100 350 ppm/C Ta * - VDET coefficient*3 *1. -VDET: Actual detection voltage value *2. Specified detection voltage value (-VDET(S)) *3. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = - VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient 28 Seiko Instruments Inc. SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 3. S-80846KNUA-D2CT2x, S-80846KNY-n2-U Table 20 Item Symbol Condition Detection voltage Hysteresis width Current consumption Operating voltage Output current -VDET VHYS ISS VDD IOUT Leakage current ILEAK Response time Detection voltage temperature coefficient*3 tPLH - VDET Ta * - VDET VDD = 6.0 V Output transistor, VDD = 1.2 V Nch, VDS = 0.5 V VDD = 2.4 V Output transistor, Nch, VDD = 10.0 V, VDS = 10.0 V *1 Ta = -40 to 85 C (Ta = 25 C unless otherwise specified) Test Min. Typ. Max. Unit circuit *2 4.500 4.600 4.700 V 1 0.05 0.10 V 1 0.9 2.7 2 A 0.95 10.0 V 1 0.59 1.36 mA 3 2.88 4.98 mA 3 0.1 A 3 60 s 1 100 350 ppm/C 1 *1. -VDET: Actual detection voltage value *2. Specified detection voltage value (-VDET(S)) *3. The temperature change of the detection voltage [mV/C] is calculated by using the following equation. - VDET [mV/ C]*1 = - VDET(S) (Typ.) [V ]*2 x - VDET [ppm/ C]*3 / 1000 Ta Ta * - VDET *1. Temperature change of the detection voltage *2. Specified detection voltage *3. Detection voltage temperature coefficient Precautions * Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. * In CMOS output products of the S-808xxC series, the through-type current flows at the detection and the release. If the input impedance is high, oscillation may occur due to the voltage drop by the through-type current during releasing. * In CMOS output products oscillation may occur when a pull-down resistor is used, and falling speed of the power supply voltage (VDD) is slow near the detection voltage. * When designing for mass production using an application circuit described herein, the product deviation and temperature characteristics should be taken into consideration. SII shall not bear any responsibility for the products on the circuits described herein. * SII claims no responsibility for any and all disputes arising out of or in connection with any infringement of the products including this IC upon patents owned by a third party. Seiko Instruments Inc. 29 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 Typical Characteristics (Typical Data) 1. Detection Voltage (VDET) - Temperature (Ta) S-80808CL S-80814CL 0.90 1.55 +VDET 1.50 +VDET 1.45 VDET (V) VDET (V) 0.85 1.40 -VDET 1.35 0.80 -VDET 1.30 1.25 0.75 -40 -20 0 20 40 60 -40 80 -20 0 S-80815CL 20 40 60 80 20 40 60 80 20 40 60 80 40 60 80 Ta (C) Ta (C) S-80860CL 1.60 6.40 6.30 +VDET VDET (V) VDET (V) 1.55 1.50 -VDET +VDET 6.20 6.10 6.00 -VDET 5.90 5.80 1.45 -40 -20 0 20 40 60 -40 80 -20 0 -20 0 Ta (C) Ta (C) 2. Hysteresis Voltage Width (VHYS) - Temperature (Ta) S-80808CL 8.0 S-80814CL 8.0 7.0 6.0 VHYS (%) V HYS (%) 7.0 5.0 4.0 3.0 -40 6.0 5.0 4.0 3.0 -20 0 20 40 Ta (C) 60 80 -40 Ta (C) S-80815CL 8.0 S-80860CL 8.0 7.0 VHYS (%) V HYS (%) 7.0 6.0 5.0 4.0 3.0 -40 30 6.0 5.0 4.0 3.0 -20 0 20 40 Ta (C) 60 80 -40 -20 0 20 Ta (C) Seiko Instruments Inc. SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 3. Current Consumption (ISS) - Input Voltage (VDD) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 Ta=25C S-80814CL 9.3 A ISS (A) ISS (A) S-80808CL 0 1.0 2.0 3.0 4.0 5.0 Ta=25C 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 21.5 A 6.0 0 1.0 2.0 VDD (V) Ta=25C 4.7 A 0 2.0 4.0 6.0 4.0 S-80860CL ISS (A) ISS (A) S-80815CL 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 3.0 5.0 6.0 VDD (V) 8.0 10.0 Ta=25C 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 12.8 A 0 12.0 2.0 4.0 6.0 8.0 10.0 12.0 VDD (V) VDD (V) 4. Current Consumption (ISS) - Temperature (Ta) VDD=1.5 V 2.0 1.5 1.5 1.0 0.5 VDD=2.0 V S-80814CL 2.0 ISS (A) ISS (A) S-80808CL 0.0 1.0 0.5 0.0 -40 -20 0 20 40 60 80 -40 -20 0 VDD=3.5 V 2.0 1.5 1.5 1.0 0.5 0.0 -20 0 20 40 S-80860CL 2.0 ISS (A) ISS (A) S-80815CL -40 20 60 80 Ta (C) Ta (C) 40 60 80 VDD=7.5 V 1.0 0.5 0.0 Ta (C) -40 -20 0 20 40 60 80 Ta (C) Seiko Instruments Inc. 31 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 5. Nch Transistor Output Current (IOUT) - VDS S-80814CL/CN 5.0 Ta=25C VDD=1.3 V 4.0 3.0 2.0 VDD=1.0 1.0 VDD=0.7 V Ta=25C 6.0 V 40 IOUT (mA) IOUT (mA) S-80860CL/CN 50 4.8 V 30 3.6 V 20 2.4 V 10 0 VDD=1.2 V 0 0 0.5 1.0 1.5 VDS (V) 2.0 2.5 0 1.0 2.0 3.0 VDS (V) 4.0 5.0 6. Pch Transistor Output Current (IOUT) -VDS Ta=25C 4.0 VDD=2.9V 3.0 VDD=2.4V 2.0 VDD=1.9 V 1.0 0 0.5 Ta=25C 8.4 V 25 VDD=1.4 V VDD=0.9 V 0 S-80815CL 30 IOUT (mA) IOUT (mA) S-80808CL 5.0 20 7.2 V 6.0 V 15 4.8 V 3.6 V 10 5 VDD=2.4 V 0 1.0 1.5 VDS (V) 2.0 0 2.5 2.0 4.0 6.0 VDS (V) 8.0 10.0 7. Nch Transistor Output Current (IOUT) - Input Voltage (VDD) S-80814CL/CN VDS=0.5 V 6.0 VDS=0.5 V S-80860CL/CN 20 Ta=-40C Ta=-40C 15 Ta=25C IOUT (mA) IOUT (mA) 4.5 3.0 1.5 Ta=25C 10 5 Ta=85 Ta=85C 0 0 0.5 1.0 VDD (V) 1.5 0 2.0 0 2.0 4.0 VDD (V) 6.0 8.0 8. Pch Transistor Output Current (IOUT) - Input Voltage (VDD) S-80808CL VDS=0.5 V 3.0 Ta=25C 1.5 1.0 Ta=85C 0.5 4 Ta=25C 3 2 Ta=85C 1 0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 VDD (V) 32 Ta=-40C 5 IOUT (mA) IOUT (mA) 2.0 6 Ta=-40C 2.5 VDS=0.5 V S-80815CL 0 2.0 4.0 6.0 VDD (V) Seiko Instruments Inc. 8.0 10.0 12.0 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 9. Minimum Operating Voltage - Input Voltage (VDD) S-80808CN Pull-up to VDD 100 k 4.0 0.9 3.0 Pull-up to 3 V Ta=-40C VOUT (V) Ta=-40C VOUT (V) S-80808CN 1.2 0.6 Ta=25C 0.3 Ta=85C 0.0 Ta=25C 2.0 Ta=85C 1.0 0.0 0.0 0.2 0.4 0.6 1.0 0.8 0.2 0.4 Pull-up to VDD 100 k S-80815CN 0.6 0.8 1.0 VDD (V) VDD (V) S-80815CN 2.0 4.0 1.5 3.0 Pull-up to 3 V VOUT (V) VOUT (V) Ta=-40C Ta=-40C 1.0 Ta=25C 0.5 Ta=85C 0.0 Ta=25C 2.0 Ta=85C 1.0 0.0 0 0.5 1.0 1.5 2.0 0 VDD (V) S-80808CN 1.0 1.5 2.0 VDD (V) Pull-up to VDD :100 k 0.65 0.60 0.5 Ta=-40C VOUT(V) PULL-UP VDDmin (V) 0.55 0.50 PULL-UPx0.1 0.45 0.40 Ta=25C 0.35 0 Ta=85C VDDmin 0.30 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 PULL-UP (V) S-80815CN Remark VDDmin. is defined by the VDD voltage at which VOUT goes below 10% of PULL-UP voltage when the VDD increase from 0 V. Pull-up to VDD :100 k 0.75 0.70 VDD(V) Figure 24 Ta=-40C VDDmin (V) 0.65 0.60 0.55 0.50 0.45 Ta=85C Ta=25C 0.40 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 PULL-UP (V) Seiko Instruments Inc. 33 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 10. Dynamic Response - COUT S-80808CL Ta=25C S-80808CN Resopnse time (ms) Response time (ms) tpHL 0.1 0.01 tpLH 0.001 0.00001 0.0001 0.001 0.01 tpLH 10 1 0.1 tpHL 0.01 0.001 0.00001 0.1 Load capacitance (F) S-80814CL Ta=25C 0.1 0.01 tpLH 0.001 0.01 tpLH 1 0.1 tpHL 0.01 0.01 tpLH 0.001 0.01 tpLH 1 0.1 tpHL 0.01 0.0001 0.001 S-80860CN Respone time (ms) Response time (ms) Ta=25C 0.01 0.1 Ta=25C 100 0.1 0.01 tpLH 0.0001 0.001 0.01 Load Capacitance (F) 34 0.1 Load Capacitance (F) tpHL 0.001 0.00001 0.01 10 0.001 0.00001 0.1 Ta=25C 1 0.001 100 Load Capacitance (F) S-80860CL 0.0001 S-80815CN Response time (ms) Response time (ms) 0.1 0.0001 Ta=25C Load Capacitance (F) tpHL 0.001 0.00001 0.1 10 0.001 0.00001 0.1 Ta=25C 1 0.01 100 Load capacitanse (F) S-80815CL 0.001 S-80814CN Response time (ms) Response time (ms) tpHL 0.0001 0.0001 Load capacitance (F) 1 0.001 0.00001 Ta=25C 100 1 0.1 tpLH 10 1 0.1 tpHL 0.01 0.001 0.00001 0.0001 0.001 0.01 Load Capacitance (F) Seiko Instruments Inc. 0.1 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 1 s 1 s *1 VIH VDD Input voltagae V VIL tpHL VDD S-808xxC OUT Series COUT VSS R 100 k V tpLH VDD VDDx90 % Output voltage *1. R is unnecessary for CMOS output products. VDDx10 % VIH=10 V, VIL=0.95 V Figure 25 Measurement Condition for Response Time Figure 26 Measurement Circuit for Response Time Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants. Application Circuit Examples 1. Microcomputer Reset Circuits If the power supply voltage to a microcomputer falls below the specified level, an unspecified operation may be performed or the contents of the memory register may be lost. When power supply voltage returns to normal, the microcomputer needs to be initialized before normal operations can be done. Reset circuits protect microcomputers in the event of current being momentarily switched off or lowered. Reset circuits shown in Figures 27 to 28 can be easily constructed with the help of the S-808xxC series, that has low operating voltage, a high-precision detection voltage and hysteresis. VDD1 VDD2 VDD S808xxCL S808xxCN Microcomputer Microcomputer VSS VSS (Only for Nch open-drain products) Figure 27 Reset Circuit Example(S-808xxCL) Figure 28 Reset Circuit Example (S-808xxCN) Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants. Seiko Instruments Inc. 35 SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 2. Power-on Reset Circuit A power-on reset circuit can be constructed using Nch open-drain output product of S-808xxC Series. VDD Di *1 *2 R VIN (R75 k) S808xxCN OUT (Nch open-drain products) C VSS *1. Resistor R should be 75 k or less to prevent oscillation. *2. Diode Di instantaneously discharges the charge stored in the capacitor (C) at the power falling,Di can be removed when the delay of the falling time is not important. Figure 29 VDD (V) OUT (V) t (s) t (s) Figure 30 Remark When the power rises sharply as shown in the Figure 31 left, the output may goes to the high level for an instant in the undefined region where the output voltage is undefined since the power voltage is less than the minimum operation voltage. VDD (V) OUT (V) t (s) t (s) Figure 31 36 Seiko Instruments Inc. SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-808xxC Series Rev.6.1_00 3. Change of Detection Voltage In Nch open-drain output products of the S-808xxC series, detection voltage can be changed using resistance dividers or diodes as shown in Figures 32 to 33. In Figure 32, hysteresis width also changes. VDD VDD RA Vf1 *1 (RA75 k) S808xxCN VIN Vf2 VIN OUT S808xxCN + RB - OUT (Nch open-drain output product) (Nch open-drain output products) VSS VSS RA + RB * - VDET RB RA + RB Hysterisis width = * VHYS RB Detection voltagae = Detection voltage=Vf1+Vf2+(-VDET) *1. RA should be 75 k or less to prevent oscillation. Caution If RA and RB are large, the hysteresis width may aloso be larger than the value given by the above equation due to the through-type current (which flows slightly in an Nch open-drain product). Figure 32 Figure 33 Caution The above connection diagram and constants do not guarantee correct operation. Perform sufficient evaluation using the actual application to set the constants. Seiko Instruments Inc. 37 2.00.2 1.30.2 4 3 0.05 +0.1 0.3 -0.05 +0.1 0.16 -0.06 2 1 +0.1 0.4 -0.05 No. NP004-A-P-SD-1.1 TITLE SC82AB-A-PKG Dimensions NP004-A-P-SD-1.1 No. SCALE UNIT mm Seiko Instruments Inc. +0.1 o1.5 -0 4.00.1 2.00.05 1.10.1 4.00.1 0.20.05 o1.050.1 (0.7) 2.20.2 2 1 3 4 Feed direction No. NP004-A-C-SD-3.0 TITLE SC82AB-A-Carrier Tape No. NP004-A-C-SD-3.0 SCALE UNIT mm Seiko Instruments Inc. 4.00.1 2.00.1 o1.5 1.10.1 +0.1 -0 4.00.1 0.20.05 o1.050.1 2.30.15 2 1 3 4 Feed direction No. NP004-A-C-S1-2.0 TITLE SC82AB-A-Carrier Tape No. NP004-A-C-S1-2.0 SCALE UNIT mm Seiko Instruments Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. NP004-A-R-SD-1.1 TITLE SC82AB-A-Reel No. NP004-A-R-SD-1.1 QTY. SCALE UNIT mm Seiko Instruments Inc. 3,000 2.90.2 1.90.2 4 5 1 2 +0.1 0.16 -0.06 3 0.950.1 0.40.1 No. MP005-A-P-SD-1.2 TITLE No. SOT235-A-PKG Dimensions MP005-A-P-SD-1.2 SCALE UNIT mm Seiko Instruments Inc. 4.00.1(10 pitches:40.00.2) +0.1 o1.5 -0 2.00.05 +0.2 o1.0 -0 0.250.1 4.00.1 1.40.2 3.20.2 3 2 1 4 5 Feed direction No. MP005-A-C-SD-2.1 TITLE SOT235-A-Carrier Tape No. MP005-A-C-SD-2.1 SCALE UNIT mm Seiko Instruments Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. MP005-A-R-SD-1.1 SOT235-A-Reel TITLE No. MP005-A-R-SD-1.1 SCALE QTY. UNIT mm Seiko Instruments Inc. 3,000 4.50.1 1.50.1 1.60.2 1 2 3 1.50.1 1.50.1 0.40.05 45 0.40.1 0.40.1 0.450.1 No. UP003-A-P-SD-1.1 TITLE SOT893-A-PKG Dimensions No. UP003-A-P-SD-1.1 SCALE UNIT mm Seiko Instruments Inc. +0.1 o1.5 -0 4.00.1(10 pitches : 40.00.2) 2.00.05 o1.5 +0.1 -0 5 max. 0.30.05 8.00.1 2.00.1 4.750.1 Feed direction No. UP003-A-C-SD-1.1 TITLE SOT893-A-Carrier Tape No. UP003-A-C-SD-1.1 SCALE UNIT mm Seiko Instruments Inc. 16.5max. 13.00.3 Enlarged drawing in the central part (60) (60) No. UP003-A-R-SD-1.1 SOT893-A-Reel TITLE No. UP003-A-R-SD-1.1 SCALE UNIT QTY. mm Seiko Instruments Inc. 1,000 1.20.04 3 4 +0.05 0.08 -0.02 2 1 0.65 0.480.02 0.20.05 No. PF004-A-P-SD-4.0 TITLE SNT-4A-A-PKG Dimensions PF004-A-P-SD-4.0 No. SCALE UNIT mm Seiko Instruments Inc. +0.1 o1.5 -0 4.00.1 2.00.05 0.250.05 +0.1 5 1.450.1 2 1 3 4 o0.5 -0 4.00.1 0.650.05 Feed direction No. PF004-A-C-SD-1.0 TITLE SNT-4A-A-Carrier Tape PF004-A-C-SD-1.0 No. SCALE UNIT mm Seiko Instruments Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. PF004-A-R-SD-1.0 SNT-4A-A-Reel TITLE PF004-A-R-SD-1.0 No. SCALE UNIT QTY. mm Seiko Instruments Inc. 5,000 0.52 2 1.16 0.52 0.35 1. 2. 0.3 1 (0.25 mm min. / 0.30 mm typ.) (1.10 mm ~ 1.20 mm) 0.03 mm 1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.). 2. Do not widen the land pattern to the center of the package (1.10 mm to 1.20 mm). Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package. 2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm or less from the land pattern surface. 3. Match the mask aperture size and aperture position with the land pattern. 4. Refer to "SNT Package User's Guide" for details. 1. 1. (0.25 mm min. / 0.30 mm typ.) 2. (1.10 mm ~ 1.20 mm) 2. 1. 2. () 0.03 mm 3. 4. "SNT" TITLE SNT-4A-A-Land Recommendation PF004-A-L-SD-4.0 No. No. PF004-A-L-SD-4.0 SCALE UNIT mm Seiko Instruments Inc. 4.2max. 5.2max. Marked side 0.6max. 0.450.1 0.450.1 1.27 No. YS003-D-P-SD-2.0 TITLE No. TO92-D-PKG Dimensions YS003-D-P-SD-2.0 SCALE UNIT mm Seiko Instruments Inc. 5.2max. 4.2max. Marked side 0.6max. 0.450.1 0.450.1 +0.4 2.5 -0.1 1.27 No. YZ003-E-P-SD-2.0 TITLE TO92-E-PKG Dimensions No. YZ003-E-P-SD-2.0 SCALE UNIT mm Seiko Instruments Inc. 12.71.0 1.0max. 1.0max. 1.0max. Marked side 1#pin 3#pin 1.45max. 0.70.2 o4.00.2 6.350.4 12.70.3(20 pitches : 254.01.0) Z type Feed direction No. YZ003-E-C-SD-1.1 TO92-E-Radial Tape TITLE YZ003-E-C-SD-1.1 No. SCALE UNIT mm Seiko Instruments Inc. Spacer(Sponge) 312 18 35 Side spacer placed in front side 154 314 Space more than 4 strokes 162 333 43 No. YZ003-E-Z-SD-2.0 TITLE TO92-E-Ammo Packing No. YZ003-E-Z-SD-2.0 SCALE UNIT QTY. mm Seiko Instruments Inc. 2,000 www.sii-ic.com * * The information described herein is subject to change without notice. * When the products described herein are regulated products subject to the Wassenaar Arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority. * Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Seiko Instruments Inc. is strictly prohibited. * The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, vehicle equipment, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment, without prior written permission of Seiko Instruments Inc. * * The products described herein are not designed to be radiation-proof. Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design. Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.