© Semiconductor Components Industries, LLC, 2016
January, 2019 − Rev. 3
1Publication Order Number:
FES6D/D
FES6, NRVFES6 Series
6 A, 200 V - 600 V Surface
Mount Ultrafast Rectifiers
Features
•Very Low Profile: Typical Height of 1.1 mm
•Ultrafast Recovery Time
•Low Forward Voltage Drop
•Low Thermal Resistance
•Very Stable Operation at Industrial Temperature, 150°C
•RoHS Compliant
•Green Molding Compound as per IEC61249 Standard
•Lead Free in Compliance with EU RoHS 2011/65/EU Directive
•NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
MAXIMUM RATINGS
Parameter Symbol Value Unit
Repetitive Peak Reverse Voltage
FES6D
FES6G
FES6J
VRRM 200
400
600
V
Average Forward Rectified Current IF(AV) 6 A
Peak Forward Surge Current: 8.3 ms
Single Half Sine−Wave Superimposed
on Rated Load
IFSM 80 A
Operating Junction Temperature Range TJ−55 to
+175
°C
Storage Temperature Range TSTG −55 to
+175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
ORDERING INFORMATION
Part Number Top Mark Package Shipping†
FES6D
FES6D
TO−277 3L (with DAP Option only) 5000 / Tape & Reel
NRVFES6D*
FES6G
FES6G
NRVFES6G*
FES6J
FES6J
NRVFES6J*
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
www.onsemi.com
TO−277
3 LEAD
CASE 340BQ
2
1
3
3Anode 1
Anode 2
Cathode
FES6, NRVFES6 Series
www.onsemi.com
2
THERMAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted) (Note 1)
Parameter Symbol Value Unit
Thermal Characteristics, Junction−to−Lead, Thermocouple Soldered to Cathode YJL 6°C/W
Thermal Resistance, Junction−to−Ambient RqJA 100 °C/W
1. Per JESD51−3 Recommended Thermal Test Board.
ELECTRICAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted)
Symbol Parameter Conditions
Value
Unit
FES6D FES6G FES6J
VFMaximum Instantaneous Forward
Voltage (Note 2)
IF = 6 A 1.05 1.20 2.2 V
IF = 6 A, TJ = 125°C 0.90 1.00 1.80
IRMaximum Reverse Current
at Rated VR
TJ = 25°C 2 mA
TJ = 125°C 200 500
CJTypical Junction Capacitance VR = 4 V, f = 1 MHz 60 45 pF
Trr Typical Reverse Recovery Time IF = 0.5 A, IR = 1 A, IRR = 0.25 A 25 ns
IF = 1 A, di/dt = 50 A/ms, VR = 30 V 45
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle
FES6, NRVFES6 Series
www.onsemi.com
3
TYPICAL CHARACTERISTICS
Fig 1. Typical Forward Characteristics for FES6D Fig 2. Typical Forward Characteristics for FES6G
Fig 3. Typical Forward Characteristics for FES6J Fig 4. Typical Reverse Characteristics for FES6D
Fig 5. Typical Reverse Characteristics for FES6G
0.0 0.2 0.4 0.6 0.8 1.0 1.2
0.001
0.01
0.1
1
10
FES6D
TA = 150oC
TA = 125oC
TA = −55
oC
TA = 75oC
TA = 25oC
IF − FORWARD CURRENT (A)
VF − FORWARD VOLTAGE (V)
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
0.001
0.01
0.1
1
10
TA = 150oC
TA = 125oC
TA = −55
oC
TA = 75oC
TA = 25oC
IF − FORWARD CURRENT (A)
VF − FORWARD VOLTAGE (V)
FES6G
0.0 0.5 1.0 1.5 2.0 2.5
0.001
0.01
0.1
1
10
TA = 150oC
TA = 125oC
TA = −55
oC
TA = 75oC
TA = 25oC
IF − FORWARD CURRENT (A)
VF − FORWARD VOLTAGE (V)
FES6J
0 50 100 150 200
1E−4
0.001
0.01
0.1
1
10
100
TA = 150oCTA = 125oC
TA = −55
oC
TA = 75oC
TA = 25oC
IR − LEAKAGE CURRENT (μA)
VR − REVERSE VOLTAGE (V)
FES6D
0 50 100
0.001
0.01
0.1
1
10
100
FES6G
TA = 150oCTA = 125oC
TA = −55
oC
TA = 75oC
TA = 25oC
IR − LEAKAGE CURRENT (μA)
VR − REVERSE VOLTAGE (V)
0 50 100
0.001
0.01
0.1
1
10
100
FES6J
TA = 150oCTA = 125oC
TA = −55
oC
TA = 75oC
TA = 25oC
IR − LEAKAGE CURRENT (μA)
VR − REVERSE VOLTAGE (V)
Fig 6. Typical Reverse Characteristics for FES6J
150 200 250 300 350 400 450 500 550 600 150 200 250 300 350 400 450 500 550 600
FES6, NRVFES6 Series
www.onsemi.com
4
TYPICAL CHARACTERISTICS
Fig 7. Forward Current Derating Curve
0 25 50 75 100 125 150 175
0
1
2
3
4
5
6
7
8
TL (Cathode)
TA
IF − AVERAGE FORWARD CURRENT (A)
TEMPERATURE (oC)
0.1 1 10 100
1
10
100
1000
CJ − JUNCTION CAPACITANCE (pF)
VR − REVERSE BIAS VOLTAGE (V)
f=1MHz
FESD6J
FESD6D & FESD6G
Fig 8. Typical Junction Capacitance
FES6, NRVFES6 Series
www.onsemi.com
6
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage
may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer
is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of
any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and
do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices
intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and
hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was
negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright
laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
FES6D/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
◊
