P2 dh dh P H0 W0 W W1 L1 W2 dS1 D0 P1 F t P0 Code Dimensions Tolerance Lead length under the hold down tape Item L1 3.0 min. - Pitch of component P 12.7 0.5 Pitch of sprocket hole (1) P0 12.7 0.2 Length from hole center to lead P1 3.85 0.5 Length from hole center to component center P2 6.35 0.5 F 5.0 +0.5 -0.2 Slant to the forward or backward dh 0 1.0 Slant to the left or right dS1 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. - Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 Po20 254.0 1.5 Lead spacing Total tape thickness Pitch of sprocket hole (2) Remarks Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes (in mm)