RGF1M-E3\67A - VISHAY - Product.Network

RGF1A, RGF1B, RGF1D, RGF1G, RGF1J, RGF1K, RGF1M

www.vishay.com Vishay General Semiconductor

Revision: 25-Aug-17 1Document Number: 88697

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount Glass Passivated Junction Fast Switching Rectifier

FEATURES

• Superectifier structure for high reliability condition

• Ideal for automated placement

• Fast switching for high efficiency

• Low leakage current

• High forward surge capability

• Meets MSL level 1, per J-STD-020, LF maximum peak of

250 °C

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in fast switching rectification of power supply,

inverters, converters, and freewheeling diodes for

consumer, automotive, and telecommunication.

MECHANICAL DATA

Case: GF1 (DO-214BA), molded epoxy over glass body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

(“X” denotes revision code e.g. A, B, ...)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: two bands indicate cathode end - 1st band

denotes device type and 2nd band denotes repetitive peak

reverse voltage rating

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 50 V, 100 V, 200 V, 400 V, 600 V,

800 V, 1000 V

IFSM 30 A

VF1.3 V

trr 150 ns, 250 ns, 500 ns

TJ max. 175 °C

Package GF1 (DO-214BA)

Diode variations Single

GF1 (DO-214BA)

Superectiﬁer

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL RGF1A RGF1B RGF1D RGF1G RGF1J RGF1K RGF1M UNIT

Device marking code RA RB RD RG RJ RK RM

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward rectified current

at TL = 120 °C IF(AV) 1.0 A

Peak forward surge current 8.3 ms single half

sine-wave superimposed on rated load IFSM 30 A

Maximum full load reverse current, full cycle

average TA = 55 °C IR(AV) 50 μA

Operating junction and storage temperature range TJ, TSTG -65 to +175 °C

RGF1A, RGF1B, RGF1D, RGF1G, RGF1J, RGF1K, RGF1M

www.vishay.com Vishay General Semiconductor

Revision: 25-Aug-17 2Document Number: 88697

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Thermal resistance from junction to ambient and from junction to lead, PCB mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas

Notes

(1) AEC-Q101 qualified

(2) _A is only applied for K and M class

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL RGF1A RGF1B RGF1D RGF1G RGF1J RGF1K RGF1M UNIT

Maximum

instantaneous

forward voltage

1.0 A VF1.3 V

Maximum DC reverse

current at rated DC

blocking voltage

TA = 25 °C

5.0

μA

TA = 125 °C 100

Typical reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 150 250 500 ns

Typical junction

capacitance 4.0 V, 1 MHz CJ8.5 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL RGF1A RGF1B RGF1D RGF1G RGF1J RGF1K RGF1M UNIT

Typical thermal resistance RJA (1) 80 °C/W

RJL (1) 28

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

RGF1J-E3/67A 0.104 67A 1500 7" diameter plastic tape and reel

RGF1J-E3/5CA 0.104 5CA 6500 13" diameter plastic tape and reel

RGF1KHE3_A/I (1)(2) 0.104 I 6500 13" diameter plastic tape and reel

0.50

100 120 140 160 180

1.00

Lead Temperature (°C)

Average Forward Rectified Current (A)

60 Hz

Resistive or

Inductive Load

0.25

0.75

1.25

P.C.B. Mounted on

0.2" x 0.2" (5.0 mm x 5.0 mm)

Copper Pad Areas

110 100

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

TJ = TJ Max.

8.3 ms Single Half Sine-Wave

RGF1A, RGF1B, RGF1D, RGF1G, RGF1J, RGF1K, RGF1M

www.vishay.com Vishay General Semiconductor

Revision: 25-Aug-17 3Document Number: 88697

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

= 25 °C

Pulse Width = 300 µs

1 % Duty Cycle

020 40 60 80 100

0.01

0.1

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (µA)

= 100 °C

= 25 °C

= 125 °C

110 100

100

Reverse Voltage (V)

Junction Capacitance (pF)

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

0.01 0.1 110 100

0.1

100

Transient Thermal Impedance (°C/W)

t - Pulse Duration (s)

Mounted on

0.2" x 0.2" (5.0 mm x 5.0 mm)

Copper Pad Areas

0.167 (4.24)

0.187 (4.75)

0.0065 (0.17)

0.015 (0.38)

0.030 (0.76)

0.060 (1.52)

0.196 (4.98)

0.226 (5.74)

0.094 (2.39)

0.114 (2.90)

0.100 (2.54)

0.118 (3.00)

0.040 (1.02)

0.066 (1.68)

0.098 (2.49)

0.108 (2.74)

0.006 (0.152) TYP.

GF1 (DO-214BA)

0.076 (1.93)

MAX.

0.220 (5.58)

REF.

0.060 (1.52)

MIN.

Mounting Pad Layout

Cathode Band

0.066 (1.68)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.