Bussmann(R) Class J Fuseblocks J600 Series 600 Volt, TM-600 Amps Catalog Symbol: J600 Series Ampere Rating: TM-600A Voltage Rating: 600V Withstand Rating: 200,000 RMS Sym. Amps For use with Class J Fuses (Bussmann LPJ, JKS) Agency Information: UL Listed, UL 512, Guide IZLT, File E14853 CSA Certified, C22.2 No. 39, Class 6225-01, File 47235 UL Flammability: 94VO Materials: Thermoplastic Standard J Fuseblocks (600V) Catalog Data Amps Poles Screw Pressure Plate 1 2 3 1 2 3 1 3 1 3 1 3 1 3 J60030-1S(2) J60030-2S(2) J60030-3S(2) -- -- -- -- -- -- -- -- -- -- -- J60030-1P J60030-2P J60030-3P -- -- -- -- -- -- -- -- -- -- -- TM-30 31-60 61-100 101-200 201-400 401-600 Catalog Numbers Box Box Lug w/ Lug Retaining Clip J60030-1C J60030-2C J60030-3C J60060-1C J60060-2C J60060-3C -- -- -- -- -- -- -- -- Fig. No. J60030-1CR 1 J60030-2CR 2 J60030-3CR 3 J60060-1CR 1 J60060-2CR 2 J60060-3CR 3 J60100-1CR 4 J60100-3CR 5 J60200-1CR 6 J60200-3CR 7 J60400-1CR(3) 8 J60400-3CR(2) 9 J60600-1CR 10 J60600-3CR 11 Wire Range C, CR #2-14 CU, #2-8 AL COR #2-14 CU ONLY P, PR, S, SR #10-14 CU ONLY C, CR, #2-14 CU/AL COR #4-14 CU ONLY COR 1/0-8 CU ONLY CR, CRQ 1/0-8 CU/AL CR 250kcmil-6 CU/AL CR 500kcmil -4 CU/AL CR (2) 500kcmil-4/0 CU/AL Clip reinforcing springs are standard on fuseblocks rated 100A and above. Available on 30A and 60A blocks by adding the letter "R" to the end of the part number. Copper only connections available by changing "CR" suffix to "COR". (2)No UL, No CSA Certification (3)UL Recognized, CSA Certification Dimensional Data All dimensions (0.015) 61-100A TM-60A 1.702" 3.202" .750" 2.250" 4.702" 2.415" 2.250" 750" 5" 2.28" .30" C L 4.005" .94" 1.583" .22" Dia. .5" C'Bore 6.28" CL 3.14" 1.500" 1.75" FIGURE 1. FIGURE 2. FIGURE 3. FIGURE 4. 1.5" FIGURE 5. CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. 10-4-02 SB02295 Form No. J600 Series Page 1 of 2 Data Sheet: 1114 Bussmann(R) Class J Fuseblocks J600 Series 600 Volt, TM-600 Amps 101-200A 3.1" 3.06" .75" c'bore 6.125" 7.00" .31" .5" 3.15" 8.31" .75" 3" 2" .344" dia. hole through .750 dia. c'bore 6.125" 1.69" .34" dia. .750" FIGURE 7. FIGURE 6. 201-400A 10.51" 4" 3" 1.75" .56" .625" 3.5" 7.50" .75" c'bore .34" dia. 7.5" 4.00" 9.00" 6.00" 1" .344" dia. hole through .750 dia. c'bore 2.00" .50" .5" 1.00" FIGURE 8. FIGURE 9. 401-600A 4.99" 4" 1.75" 1.125" 4.99" 14.144" 1" 11.00" .56" 3.25" 8.875" .75" c'bore .34" dia. 2.375" FIGURE 10. .344" dia. hole through .750 dia. c'bore 8.875" 2.88" FIGURE 11. .50" 1.00" All dimensions (0.015) The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 10-4-02 SB02295 Form No. J600 Series Page 2 of 2 Data Sheet: 1114