Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Schottky Barrier Diode
90V, 200mA Rectifier
Ordering number:ENN6331
SBE803
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O0899GI (KT) No.6331–1/3
1.6 0.60.6 2.8
0.2
2.9
0.05
0.40.95
0.2
0.9
0.7
0.15
0.4
12
345
Specifications
Absolute Maximum Ratings at Ta = 25˚C (Value per element)
Package Dimensions
unit:mm
1294
[SBE803]
Applications
· High frequency rectification (switching regulators,
converters, choppers).
Features
· Low forward voltage (VF max=0.7V).
· Fast reverse recovery time (trr max=10ns).
· Low switching noise.
· Low leakage current and high reliability due to
highly reliable planar structure.
˚C
˚C
Electrical Characteristics at Ta = 25˚C (Value per element)
1 : Cathode
2 : Cathode
3 : Anode
4 : No Contact
5 : Anode
SANYO : CPH5
Mounted on a ceramic board (600mm2×0.8mm) ˚C/W
Marking : SB
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesreveRkaePevititepeRV
MRR 09V
egatloVegruSesreveRkaePevititepernoNV
MSR 59V
tnerruCtuptuOegarevAI
O002Am
tnerruCdrawroFegruSI
MSF elcyc1,evaweniszH05 5A
erutarepmeTnoitcnuJjT 521+ot55–
erutarepmeTegarotSgtsT 521+ot55–
retemaraPlobmySsnotidnoC sgnitaR tinU
nimpytxam
egatloVesreveRV
RIRAµ002=09V
egatloVdrawroFV
FIFAm002= 7.0V
tnerruCesreveRI
RVRV54= 05Aµ
ecnaticapaClanimretretnICV
RzHM1=f,V01=01Fp
emiTyrevoceResreveRt
rr IFI= R.tiucriCtseTdeificepseeS,Am001= 01sn
ecnatsiseRlamrehT)a-j(htR 011
SBE803
No.6331–2/3
Electrical Connection trr Specified Test Circuit
⁄Rectangular wave θ=60°
¤Rectangular wave θ=120°
‹Rectangular wave θ=180°
›Sine wave θ=180°
Is
20ms
t
180°
360°
θ
360°
70.01 23 7
0.1
052 237
1.0
5
7
6
5
4
3
2
1
3
IS -- t
1.0 10
2
100
1.0
10
2
3
5
7
2
3
5
7
357 2357
100
C -- VRf=1MHz
0
1.0
0.1
0.0001
0.01
0.001
5
7
3
2
5
7
3
2
5
7
3
2
5
7
3
2
10 20 30 40 50 60 70 80 90
IR -- VR
0
00.05 0.10 0.15
0.20
0.14
0.12
0.18
0.16
0.08
0.06
0.04
0.02
0.10
0.20 0.25 0.30
PF(AV) -- IO
0
0.01
0.001 0.6 0.8 1.00.2 0.4
0.1
1.0
7
5
3
2
7
5
3
2
7
5
3
2
IF -- VF
Ta=125°C
25°C
50°C
75°C
100°C
Ta=125°C
25°C
50°C
75°C
100°C
IT01112 IT01113
IT01114
IT01116
IT01115
Forward Voltage, VF -- V
Forward Current, IF -- A
Rev erse Voltage, VR -- V
Reverse Current, IR -- mA
Average Forward Current, IO -- A
Average Forward Power Dissipation, PF(AV) -- W
Rev erse Voltage, VR -- V
Interterminal Capacitance, C -- pF
Time, t -- s
Surge Forward Current , IFSM(Peak) -- A
Current waveform 50Hz sine wave
Rectangular wave
Sine wave
¤
‹
›
⁄
1 : Cathode
2 : Cathode
3 : Anode
4 : No Contact
5 : Anode
Duty≤10%
50Ω100Ω10Ω
5V trr
10µs
100mA100mA
10mA
543
12
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 1999. Specifications and information herein are subject
to change without notice.
SBE803
PS No.6331–3/3
