Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Signal Lines NFM18C Series (0603 Size) c Dimensions c Insertion Loss Characteristics (Main Items) (50 - 50) 0 0.40.1 0.80.1 20 0.60.1 0.250.1 Insertion Loss (dB) NFM18CC223R1C3 0.2 min. 1.60.1 (2) NFM18CC222R1C3 40 NFM18CC102R1C3 NFM18CC471R1C3 NFM18CC221R1C3 60 NFM18CC101R1C3 NFM18CC470U1C3 (3) 0.80.1 (1) NFM18CC220U1C3 80 100 0.1 : Electrode (2) 0.20.1 1 (in mm) c Equivalent Circuit 10 100 Frequency (MHz) 1000 6000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range -55 to +125C NFM18CC220U1C3p 22pF 20% 400mA 16Vdc 1000M ohm NFM18CC470U1C3p 47pF 20% 400mA 16Vdc 1000M ohm -55 to +125C NFM18CC101R1C3p 100pF 20% 500mA 16Vdc 1000M ohm -55 to +125C NFM18CC221R1C3p 220pF 20% 500mA 16Vdc 1000M ohm -55 to +125C NFM18CC471R1C3p 470pF 20% 500mA 16Vdc 1000M ohm -55 to +125C NFM18CC102R1C3p 1000pF 20% 600mA 16Vdc 1000M ohm -55 to +125C NFM18CC222R1C3p 2200pF 20% 700mA 16Vdc 1000M ohm -55 to +125C NFM18CC223R1C3p 22000pF 20% 1000mA 16Vdc 1000M ohm -55 to +125C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/