4.8mm BI-LEVEL LED INDICATOR Part Number: L-73EB/2GDA Green Features Description z Pre-trimmed leads for pc board mounting. The Green source color devices are made with Gallium z Colors can be mixed in a single housing. Phosphide Green Light Emitting Diode. z Black case enhances contrast ratio. z Wide viewing angle. z High reliability - life measured in years. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAC5737 REV NO: V.10B DATE: APR/15/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102001994 Selection Guide Part No. Dice L-73EB/2GDA Iv (mcd) [2] @ 10mA Lens Type Green (GaP) Viewing Angle [1] Min. Typ. 21/2 10 30 60 Green Diffused Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC5737 REV NO: V.10B DATE: APR/15/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102001994 Green L-73EB/2GDA SPEC NO: DSAC5737 REV NO: V.10B DATE: APR/15/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102001994 PACKING & LABEL SPECIFICATIONS L-73EB/2GDA SPEC NO: DSAC5737 REV NO: V.10B DATE: APR/15/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102001994 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAC5737 REV NO: V.10B DATE: APR/15/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102001994