Preliminary Data Sheet Part Number 855937 2140 MHz SAW Filter Features * * * * * * * * For UMTS applications Usable bandwidth 60 MHz Low Loss No impedance matching required for operation at 50 Single-ended operation Ceramic Surface Mount Package (SMP) Small size Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View 1 2 3 6 5 4 1.22 NOM. 1.32 MAX. 0.69 3.00 0.75 1.50 3.00 0.75 Pin No. 2,5 1,3,4,6 Description Input/Output Case ground 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 19-Jun-2002 Page 1 of 5 Part Number 855937 2140 MHz SAW Filter Preliminary Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -30 to +85 oC Parameter (3) Minimum Typical Maximum Unit - 2144 - MHz - 3.2 5 dB - 0.5 1.5 dB p-p 30 25 33 27 26 35 32 32 28 39 35 33 46 42 - dB dB dB dB dB dB dB - 8 - dB - 8 50 50 - dB Center Frequency Maximum Insertion Loss 2110 - 2170 MHz Amplitude Ripple 2110 - 2170 MHz Absolute Attenuation 10 - 500 MHz 500 - 1920 MHz 1920 - 1980 MHz 1980 - 2025 MHz 2025 - 2050 MHz 2230 - 2260 MHz 2490 - 2558 MHz Input Return Loss 2110 - 2170 MHz Output Return Loss 2110 - 2170 MHz Source Impedance (4) Load Impedance (4) Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Test Circuit: 2 50 Single-ended Subject to change or obsolescence without notice 50 5 1,3,4,6 50 Rev A No impedance matching required 19-Jun-2002 Page 2 of 5 Preliminary Data Sheet Part Number 855937 2140 MHz SAW Filter Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 19-Jun-2002 Page 3 of 5 Part Number 855937 2140 MHz SAW Filter Preliminary Data Sheet Matching Schematics 2 50 Single-ended 50 5 No impedance matching required 50 1,3,4,6 Marking PCB Footprint 3.20 SQ .96 Marking code Sawtek logo 1.70 8 JJJYM 1.27 .81 ID dot Date code .38 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 12.8 4.0 Sawtek logo O330 0.21 2.0 O1.5 A 1.75 5.5 ID dot O102 O20.2 O13.0 2.0 Direction of travel 12.0 3.25 1.4 3.25 4.0 A O1.5 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev A 19-Jun-2002 Page 4 of 5 Part Number 855937 2140 MHz SAW Filter Preliminary Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range RF Power Symbol Minimum Maximum Unit T Tstg Pin -30 -40 - +85 +85 +10 C C dBm o o Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Sawtek's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Or contact one of our worldwide network of sales offices, representatives or distributors Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Rev A 19-Jun-2002 Page 5 of 5