ECO-PACTM 1
Rectifier Module for PSBI 9/06 IFAV25 = 15A
Power Factor Correction VRRM = 1200 V
IC25 = 37A
Preliminary Data Sheet VCES = 600 V
Fast Single Phase Rectifier
Ultra Fast Boost Chopper
Typical Rectified Mains Power
Pn = 900 W at Vn = 110 V
Pn = 2100 W at Vn = 240 V
at VDC = 400 V, fT = 75 kHz,
TC = 80°C
Input Rectifier Bridge
Symbol Test Conditions Maximum Ratings
VRRM 1200 V
IFAV25 TC = 25°C; 180° sine 15 A
IFAV80 TC = 80°C; 180° sine 10 A
IFSM TVJ = 25°C t = 10 ms (50 Hz), sine 75 A
Symbol Test Conditions Characteristic Value
typ. max.
IR VR = VRRM, TVJ = 25°C 0.05 mA
TVJ = 125°C 0.5 mA
VF IF = 10A, TVJ = 25°C 1.4 1.8 V
TVJ = 125°C 1.6 V
trr VR = 100 V, IF = 10 A 1 µs
-di/dt = 5 A/µs
RthJC per diode 2.5 K/W
RthJS with heat transfer paste tbd K/W
Chopper T
Symbol Test Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 600 V
VGES continous ±20 V
IC25 TC = 25°C; 37 A
IC80 TC = 80°C; 25 A
RBSOA VCE = 600 V, RG = 10 Ω, TVJ = 125°C ICM = 100 A
Clamped inductive load, L= 100 µH VCEK ≤VCES
tSC VCE = 600 V, RG = 10 Ω, VGE = ±15 V
TVJ = 125°C, non-repetitive 10 µs
Features
• Package with DCB ceramic base
plate and soldering pins for PCB
mounting
• Isolation voltage over 3000 V∼
• Planar glasspassivated chips
• high level of integration-
only one power semiconductor
module required for the whole
PFC rectifier
• standard PFC control ICs usable
• fast rectifier diodes for enhanced
EMC behaviour
• NPT IGBT with low saturation
voltage, ultra fast switching
capability, high RBSOA and
short circuit ruggedness
• internally series connected
HiPerFRED free wheeling diode
For fast and soft reverse recover
y
at high switching frequency
• leads suitable for PC board
soldering
• UL registered, E 148688
Applications
• single phase rectification with
power factor correction (PFC)
• low harmonic content of mains
current
• mains current and voltage in
phase
• wide input voltage range,
controlled output voltage
POWERSEM GmbH, Walpersdorfer Str. 53
91126 D- Schwabach
Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
http://store.iiic.cc/
PSBI 9/06
Symbol Test Conditions Characteristic Value
typ. max.
ICES VCE = VCES, VGE = 0 V, TVJ = 25°C 0.04 mA
TVJ = 125°C 1 mA
IGES VCE = 0 V, VGE = ±20 V 100 nA
VCE(sat) IC = 10A, VGE = 15 V TVJ = 25°C 1.5 1.8 V
TVJ = 125°C 1.6 V
VGE(th) IC = 1mA, VGE = VCE min. 3 5 V
td(on) 30 ns
tr Inductive load, TVJ = 125°C 50 ns
td(off) VCE = 400 V, IC = 10A 320 ns
tf RG = 10 Ω, VGE = ±15 V 70 ns
Eon 0.60 mJ
Eoff 0.31 mJ
Cies VCE = 25 V, VGE = 0 V, f= 1 MHz 1600 pF
QGon VCE = 480 V, VGE = 15 V, IC = 10A 140 nC
RthJC 0.96 K/W
RthJS with heat transfer paste tbd K/W
Package style and outline
Dimensions in mm (1mm = 0.0394“)
Chopper D
Symbol Test Conditions Maximum Ratings
VRRM 600 V
IF25 TC = 25°C; 180° sine 35 A
IF80 TC = 80°C; 180° sine 22 A
+0,3
-0,3
Symbol Test Conditions Characteristic Value
typ. max.
IR VR = VRRM, TVJ = 25°C 0.1 mA
TVJ = 125°C 0.1 mA
VF IF = 10A, TVJ = 25°C 2.2 3.2 V
TVJ = 125°C 2.4 V
IRM IF = 10A, -diF/dt = 400 A/µs, TVJ = 125°C tbd A
trr VR = 400 V tbd µs
RthJC 1.15 K/W
RthJS with heat transfer paste tbd K/W
Module
Symbol Test Conditions Maximum Ratings
TVJ -40...+150 °C
Tstg -40...+125 °C
VISOL IISOL ≤ 1 mA, 50/60 Hz, t= 1 min 3000 V~
MD Mounting torque (M4) 1.5-1.8 Nm
Symbol Test Conditions Characteristic Value
typ. min.
dS, dA pin to heatsink 11.2 mm
Weight 16 g
POWERSEM GmbH, Walpersdorfer Str. 53
91126 D- Schwabach
Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions
http://store.iiic.cc/
