ECO-PACTM 1 Rectifier Module for Power Factor Correction PSBI 9/06 IFAV25 VRRM IC25 VCES Preliminary Data Sheet = 15A = 1200 V = 37A = 600 V Fast Single Phase Rectifier Ultra Fast Boost Chopper Typical Rectified Mains Power Pn = 900 W at Vn = 110 V Pn = 2100 W at Vn = 240 V at VDC = 400 V, fT = 75 kHz, TC = 80C Input Rectifier Bridge Symbol Features Test Conditions Maximum Ratings 1200 15 10 75 VRRM IFAV25 IFAV80 IFSM TC = 25C; TC = 80C; TVJ = 25C Symbol Test Conditions IR VR = VRRM, TVJ = 25C TVJ = 125C 0.5 VF IF = 10A, TVJ = 25C TVJ = 125C 1.4 1.6 trr VR = 100 V, IF = 10 A 180 sine 180 sine t = 10 ms (50 Hz), sine V A A A Characteristic Value typ. max. 0.05 1.8 mA mA V V s 1 -di/dt = 5 A/s RthJC RthJS per diode with heat transfer paste 2.5 tbd K/W K/W Chopper T Symbol Test Conditions VCES VGES IC25 IC80 RBSOA TVJ = 25C to 150C continous Maximum Ratings tSC VCE = 600 V, RG = 10 , VGE = 15 V TC = 25C; TC = 80C; VCE = 600 V, RG = 10 , TVJ = 125C Clamped inductive load, L= 100 H TVJ = 125C, non-repetitive POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 600 20 37 25 V V ICM = 100 VCEK VCES A 10 s A A * Package with DCB ceramic base plate and soldering pins for PCB mounting * Isolation voltage over 3000 V * Planar glasspassivated chips * high level of integrationonly one power semiconductor module required for the whole PFC rectifier * standard PFC control ICs usable * fast rectifier diodes for enhanced EMC behaviour * NPT IGBT with low saturation voltage, ultra fast switching capability, high RBSOA and short circuit ruggedness * internally series connected HiPerFRED free wheeling diode For fast and soft reverse recovery at high switching frequency * leads suitable for PC board soldering * UL registered, E 148688 Applications * single phase rectification with power factor correction (PFC) * low harmonic content of mains current * mains current and voltage in phase * wide input voltage range, controlled output voltage 2005 POWERSEM reserves the right to change limits, test conditions and dimensions http://store.iiic.cc/ PSBI 9/06 Test Conditions ICES VCE = VCES, VGE = 0 V, Characteristic Value typ. IGES VCE(sat) VCE = 0 V, VGE = 20 V IC = 10A, VGE = 15 V VGE(th) td(on) tr td(off) tf Eon Eoff Cies QGon RthJC RthJS IC = 1mA, VGE = VCE TVJ = 25C TVJ = 125C TVJ = 25C TVJ = 125C 1 1.5 1.6 min. 3 Inductive load, TVJ = 125C VCE = 400 V, IC = 10A RG = 10 , VGE = 15 V VCE = 25 V, VGE = 0 V, f= 1 MHz VCE = 480 V, VGE = 15 V, IC = 10A max. 0.04 100 1.8 nA V V 5 V 30 50 320 ns ns ns 70 0.60 0.31 ns mJ mJ 1600 140 pF nC 0.96 with heat transfer paste mA mA tbd Package style and outline Dimensions in mm (1mm = 0.0394") +0,3 -0,3 Symbol K/W K/W Chopper D Symbol Test Conditions VRRM IF25 IF80 TC = 25C; TC = 80C; Symbol Test Conditions Maximum Ratings 600 35 22 180 sine 180 sine Characteristic Value typ. VR = VRRM, TVJ = 25C TVJ = 125C 0.1 VF IF = 10A, 2.2 IRM trr RthJC RthJS IF = 10A, -diF/dt = 400 A/s, TVJ = 125C VR = 400 V IR TVJ = 25C TVJ = 125C max. 0.1 3.2 2.4 tbd tbd mA mA V V A 1.15 with heat transfer paste V A A tbd s K/W K/W Module Symbol Test Conditions TVJ Tstg VISOL MD IISOL 1 mA, 50/60 Hz, t= 1 min Mounting torque (M4) Symbol Test Conditions Maximum Ratings -40...+150 -40...+125 C C 3000 1.5-1.8 V~ Nm Characteristic Value typ. dS, dA Weight pin to heatsink POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 min. 11.2 16 mm g 2005 POWERSEM reserves the right to change limits, test conditions and dimensions http://store.iiic.cc/