10-1307.1369 - EAO - Product.Network

EAO – Your Expert Partner for

Human Machine Interfaces

EAO Product Information

Series 22

Switches and Indicators

Contents

09.2009

Description......................................................................................................3

Product Assembly ..........................................................................................4

Devices raised mounting ...............................................................................6

Accessories...................................................................................................10

Technical Data...............................................................................................14

Application guidelines..................................................................................15

Marking..........................................................................................................16

Drawings........................................................................................................17

Index...............................................................................................................22

09.2009

Description

General notes

The illuminated pushbuttons, keylock switches, mushroom pushbuttons

with momentary or maintained action and indicators are primarily

noteworthy for their degree of protection IP 65 of the front (i.e. dust and

splash-proof). Their robust, compact design, mounting by one man,

their screw and plug-in terminals proof against inadvertent contact, and

their large surface area for engraving and illumination are other quality

features.

The switching element is a double-break snap-action system, the

current being carried by a through-contact bar.

The dimensions of the front bezel are 24 x 36 mm. For indicators and

illuminated pushbuttons you can choose the design of the front to suit

your requirements from two front bezels which clip on in different ways.

The raised front bezel of keylock switches is fixed Typ-Nr. 02-967.0.

Mounting

Mounting by one man from the front. The switch, pushed into the square

opening in the panel from the front, can be fixed with two clamping

elements (tighten scr ews with max. 30 Ncm).

Lenses

The flat lenses, made of Polymethyl Methacrylate, are obtainable in

various colours, as well as transparent or translucent.

The lens has to be fitted in the unactuated position.

Marking

For further information about engraving, hot stamping and film inserts

see part Marking.

Illumination

The T1 3/4 Midget Groove incandescent (filament) lamp (6 ... 48 V)

ensures perfect illumination of the lenses, which are supplied in various

colours.

T1 3/4 Midget Groove Single-LED (6, 12, 24, 28, 48 V) are also available

in blue, green, red, white or yellow.

Luminosity and wave length scattering caused by the technology used

in the LED manufacturing processes may lead to visual differences in

our products.

For supply voltages above 48 V, it is necessary to use a voltage

reduction element (external series resistor or transformer).

Position indication

The status of a maintained action switch can be determinded by the

position of the lens.

Keylock switch

Standard lock (Index D). Standard lock number is 311. If the lock

number is not specified, we will supply standard number 311.

An additional 134 special locks (Index X) are available on request.

Master keys for lock numbers 311 ... 445 may be ordered by quoting

Typ-Nr. 31-989.300. Two keys are supplied with each keylock switch.

Spare keys (Index D) for standard locks may be ordered by quoting Typ-

Nr. 31-989.xxx (please state the lock number).

Number structure

Nomenclature in accordance with ' IEC 61058 TEST REPOR T '. The

certification document we dispatch to them on demands.

Specimen order

We reserve the right to modify technical data

All dimensions in mm

Product Information Indicator :

- Indicator actuator, 24 x 36 mm, screw terminal 22-040.004

Essential accessories :

- Lens plastic red, transparent 22-903.2

- Front bezel flush, black 22-965.0

- Single-LED, T1 3/4 MG, 24 VAC/DC, red 10-2J12.1062

Product Assembly

09.2009

Indicator

01 Lens

2LED

3 Front bezel clip-on

4 Switch housing

5 Sealing

6 Front plate

Illuminated pushbutton

01 Lens

2LED

3 Front bezel clip-on

4 Switch housing

5 Sealing

6 Front plate

Product Assembly

09.2009

Mushroom-head pushbutton

01 Mushroom-head cap

2LED

3 Front bezel clip-on

4 Switch housing

5 Sealing

6 Front plate

Devices raised mounting

09.2009

Essential Accessories:

d Front bezel flush page 10

d Lens plastic page 10

d Single-LED page 12

Continuation see next page

Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal

Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19

Indicator actuator

Front protection

Terminals

a 24 x 36 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Indicator actuator IP 65 PT 6.3 22-040.004 1 2 1 0.019

ST 22-040.001 1 2 1 0.022

Devices raised mounting

09.2009

Essential Accessories:

d Front bezel flush page 10

d Lens plastic page 10

d Single-LED page 12

Continuation see next page

Switching system: SA = Snap-action switching element

Contacts: NC = Normally closed, NO = Normally open

Switching action: MA = Maintained action, M = Momentary action

Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal

Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19

Illuminated pushbutton actuator

Front protection

Switching system

Contacts

Switching action

Terminals

a 24 x 36 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Illuminated pushbutton actuator IP 65 SA 1 NC MA PT 6.3 22-222.014 133 0.032

ST 22-222.011 133 0.037

MPT 6.322-212.014 138 0.032

ST 22-212.011 138 0.037

1 NC + 1 NO MA PT 6.3 22-225.014 135 0.034

ST 22-225.011 135 0.044

MPT 6.322-215.014 1 3 10 0.034

ST 22-215.011 1 3 10 0.044

1 NO MA PT 6.3 22-221.014 134 0.032

ST 22-221.011 134 0.037

MPT 6.322-211.014 139 0.032

ST 22-211.011 139 0.037

2 NC MA PT 6.3 22-224.014 132 0.034

ST 22-224.011 132 0.044

MPT 6.322-214.014 137 0.034

ST 22-214.011 137 0.044

2 NO MA PT 6.3 22-223.014 136 0.044

ST 22-223.011 136 0.044

MPT 6.322-213.014 1 3 11 0.034

ST 22-213.011 1 3 11 0.044

Devices raised mounting

09.2009

Essential Accessories:

d Front bezel flush page 10

d Mushroom-head cap page 10

Continuation see next page

Switching system: SA = Snap-action switching element

Contacts: NC = Normally closed, NO = Normally open

Switching action: MA = Maintained action, M = Momentary action

Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal

Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19

Mushroom-head pushbutton actuator

Switching system

Contacts

Switching action

Terminals

a 24 x 36 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Mushroom-head pushbutton actuator SA 1 NC MA PT 6.3 22-222.014 1 4 3 0.032

ST 22-222.011 1 4 3 0.037

MPT 6.322-212.014 1 4 8 0.032

ST 22-212.011 1 4 8 0.037

1 NC + 1 NO MA PT 6.3 22-225.014 1 4 5 0.034

ST 22-225.011 1 4 5 0.044

MPT 6.322-215.014 1 4 10 0.034

ST 22-215.011 1 4 10 0.044

1 NO MA PT 6.3 22-221.014 1 4 4 0.032

ST 22-221.011 1 4 4 0.037

MPT 6.322-211.014 1 4 9 0.032

ST 22-211.011 1 4 9 0.037

2 NC MA PT 6.3 22-224.014 1 4 2 0.034

ST 22-224.011 1 4 2 0.044

MPT 6.322-214.014 1 4 7 0.034

ST 22-214.011 1 4 7 0.044

2 NO MA PT 6.3 22-223.014 1 4 6 0.044

ST 22-223.011 1 4 6 0.044

MPT 6.322-213.014 1 4 11 0.034

ST 22-213.011 1 4 11 0.044

Devices raised mounting

09.2009

Continuation see next page

Other lock numbers on request

Switching system: SA = Snap-action switching element

Contacts: NC = Normally closed, NO = Normally open

Switching action: MA = Maintained action, M = Momentary action

Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal

Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19

Keylock switch 2 posit ions

Front protection

Switching system

Contacts

Switching action

Terminals

Key remove

a 24 x 36 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Keylock switch 2 positions

Position A : Basic position

Position C : Maintained action

Standard lock 311

Front : Plastic black

IP 65 SA 1 NC + 1 NO MA PT 6.3 A 22-335.114D 1 5 16 0.046

C22-335.314D 1 5 16 0.046

C + A 22-335.514D 1 5 16 0.046

ST A 22-335.111D 1 5 16 0.051

C22-335.311D 1 5 16 0.051

C + A 22-335.511D 1 5 16 0.051

1 NO MA PT 6.3 A 22-331.114D 1 5 15 0.046

C22-331.314D 1 5 15 0.044

C + A 22-331.514D 1 5 15 0.040

ST A 22-331.111D 1 5 15 0.051

C22-331.311D 1 5 15 0.044

C + A 22-331.511D 1 5 15 0.044

2 NO MA PT 6.3 A 22-333.114D 1 5 17 0.046

C22-333.314D 1 5 17 0.046

C + A 22-333.514D 1 5 17 0.046

ST A 22-333.111D 1 5 17 0.051

C22-333.311D 1 5 17 0.051

C + A 22-333.511D 1 5 17 0.051

Position A : Basic position

Position C : Momentary action

Standard lock 311

Front : Plastic black

IP 65 SA 1 NC + 1 NO M PT 6.3 A 22-355.114D 1 5 13 0.046

ST A 22-355.111D 1 5 13 0.051

1 NO M PT 6.3 A 22-351.114D 1 5 12 0.046

ST A 22-351.111D 1 5 12 0.051

2 NO M PT 6.3 A 22-353.114D 1 5 14 0.046

ST A 22-353.111D 1 5 14 0.051

09.2009

Accessories

Continuation see next page

use Front bezel flush

Continuation see next page

Lens only removable with lens remover 98-969

Continuation see next page

Front

Lens plastic

Lens

a 24 x 36 mm

Typ-Nr. e

Lens plastic

illuminative blue transparent 22-903.6 0.003

colourless transparent 22-903.7 0.003

green transparent 22-903.5 0.003

orange transparent 22-903.3 0.003

red transparent 22-903.2 0.003

smoked transparent 22-903.1 0.003

yellow transparent 22-903.4 0.003

illuminative

(not recommended for film insert) colourless transparent 22-905.7 0.003

green transparent 22-905.5 0.003

red transparent 22-905.2 0.003

yellow transparent 22-905.4 0.003

illuminative

(not recommended for film insert, bright LED's are visible) blue translucent 22-901.6 0.003

green translucent 22-901.5 0.003

orange translucent 22-901.3 0.003

red translucent 22-901.2 0.003

white translucent 22-901.9 0.003

yellow translucent 22-901.4 0.003

non-illuminative black opaque 22-901.0 0.003

grey opaque 22-901.8 0.003

Mushroom-head cap

Mushroom had cap

a 24 x 36 mm

Typ-Nr. e

Mushroom-head cap

non-illuminative Plastic black opaque 22-930.0 0.006

Plastic green opaque 22-930.5 0.006

Plastic red opaque 22-930.2 0.006

Plastic yellow opaque 22-930.4 0.006

Front bezel flush

Front bezel

a 24 x 36 mm

Typ-Nr. e

Front bezel flush Plastic black 02-965.0 0.001

Front bezel raised

Front bezel

a 24 x 36 mm

Typ-Nr. e

Front bezel raised Plastic black 02-967.0 0.001

09.2009

Accessories

use Front bezel flush

Continuation see next page

Technical drawing from page 17

Continuation see next page

Other lock numbers on request

Protective cover

a 24 x 36 mm

Typ-Nr.

Technical drawing

Protective cover

hinged, transparent, with means for sealing 22-925 1 0.004

Blind plug

a 24 x 36 mm

Typ-Nr. e

Blind plug

Mounting hole size 16 mm dia. Plastic black 22-949.0 0.005

Master key

Typ-Nr. e

Master key

Lock numbers 311 ... 445 (DOM) 31-989.300 0.006

Spare key

Typ-Nr. e

Spare key

Key lock switch, standard lock 311 (DOM) 31-989.311 0.006

09.2009

Accessories

Continuation see next page

Note:

AC operation through halve-wave rectifier possible, slight flicker ing can occure.

Illumination

Filament lamp

Socket Operating voltage/-current Typ-Nr. e

Filament lamp T1 3/4 MG 12 VAC/DC, 75 mA 10-1309.1309 0.001

14 VAC/DC, 80 mA 10-1310.1319 0.001

18 VAC/DC, 40 mA 10-1311.1249 0.001

24 VAC/DC, 35 mA 10-1312.1229 0.001

28 VAC/DC, 30 mA 10-1313.1209 0.001

28 VAC/DC, 40 mA 10-1313.1249 0.001

36 VAC/DC, 20 mA 10-1316.1179 0.001

36 VAC/DC, 30 mA 10-1316.1209 0.001

48 VAC/DC, 20 mA 10-1319.1179 0.001

48 VAC/DC, 25 mA 10-1319.1199 0.001

6 VAC/DC, 120 mA 10-1306.1349 0.001

6.3 VAC/DC, 200 mA 10-1307.1369 0.001

Single-LED

Socket Light colour Operating voltage/-current Typ-Nr. e

Single-LED T1 3/4 MG blue 12 VAC/DC, 7/14 mA 10-2J09.1066 0.002

24 VAC/DC, 7/14 mA 10-2J12.1066 0.002

28 VAC/DC, 7/14 mA 10-2J13.1066 0.002

48 VAC/DC, 4/8 mA 10-2J19.1046 0.002

6 VDC, 15 mA 10-2J06.3146 0.002

green 12 VAC/DC, 4/7 mA 10-2J09.1065 0.002

24 VAC/DC, 4/7 mA 10-2J12.1065 0.002

28 VAC/DC, 4/7 mA 10-2J13.1065 0.002

48 VAC/DC, 2/4 mA 10-2J19.1045 0.002

6 VDC, 7 mA 10-2J06.3145 0.002

red 12 VAC/DC, 7/14 mA 10-2J09.1062 0.002

24 VAC/DC, 7/14 mA 10-2J12.1062 0.002

28 VAC/DC, 7/14 mA 10-2J13.1062 0.002

48 VAC/DC, 4/8 mA 10-2J19.1042 0.002

6 VDC, 15 mA 10-2J06.3142 0.002

white diffuse 12 VAC/DC, 7/14 mA 10-2J09.1069 0.002

24 VAC/DC, 7/14 mA 10-2J12.1069 0.002

28 VAC/DC, 7/14 mA 10-2J13.1069 0.002

48 VAC/DC, 4/8 mA 10-2J19.1049 0.002

6 VDC, 15 mA 10-2J06.3149 0.002

yellow 12 VAC/DC, 7/14 mA 10-2J09.1064 0.002

24 VAC/DC, 7/14 mA 10-2J12.1064 0.002

28 VAC/DC, 7/14 mA 10-2J13.1064 0.002

48 VAC/DC, 4/8 mA 10-2J19.1044 0.002

6 VDC, 15 mA 10-2J06.3144 0.002

09.2009

Accessories

for lamp voltage reduction

Continuation see next page

Please keep to the country specific security rules.

for fitting with series resistors

Continuation see next page

CAUTION

A switching process might be released when replacing the lamp/LED !

for dismantling the lens from the holder

Continuation see next page

Series resistor

Operating voltage Typ-Nr. e

Series resistor

10 kΩ, for filament lamp 48 VAC, 25 mA 230/240 V 02-904.7 0.003

2.7 kΩ, for filament lamp 48 VAC, 25 mA 110 V 02-904.0 0.003

3.3 kΩ, for filament lamp 48 VAC, 25 mA 125 V 02-904.1 0.003

4.7 kΩ, for filament lamp 48 VAC, 25 mA 145 V 02-904.3 0.003

Terminal plate empty

Typ-Nr. e

Terminal plate empty

10 spaces 125 x 60 x 15 mm 02-912.2 0.045

15 spaces 187.5 x 60 x 15 mm 02-912.3 0.090

20 spaces 250 x 60 x 15 mm 02-912.4 0.095

5 spaces 62.5 x 60 x 15 mm 02-912.1 0.025

Assembling

Lens remover

Typ-Nr. e

Lens remover

for flush front bezel 02-905 0.011

for raised front bezel 98-968 0.004

Lamp remover

Typ-Nr. e

Lamp remover 61-9740.0 0.003

Dismantling tool

Typ-Nr. e

Dismantling tool 22-938 0.030

09.2009

Technical Data

Switching system

Self-cleaning, double-break, snap-action switching system (with

contact gap 2 x 1.5 mm).

Max. 2 normally closed or 2 normally open contacts, or one of each.

Material

Lens

Polymetylmethacrylate PMMA, as per UL 94 HB, Polycarbonate

(PC), as per UL 94 V0

Front bezel

Polyphenylenoxide (PPO)

Material of contact

Hard silver

Actuator housing

Polyamide (PA), Polytherimide (PEI)

Mechanical characteristics

Terminals

Screw terminal (with self-lifting clip):

Max. wire cross-section 2 x 2.5 mm²

Max. wire cross-section of stranded cable 2 x 1.5 mm²

Plug-in terminal 6.3 x 0.8 mm

Actuating force

with 1 switching element 3.6 N ±0.3 N

with 2 switching elements 6.8 N ±0.3 N

Actuating travel

5.5 mm ±0.2 mm

Travel

3 mm

Rebound time

≤3 ms

Mechanical lifetime

Illuminated pushbutton 1 million operations

Keylock switch 40 000 operations

Electrical characteristics

Contact resistance

Starting value ≤50 mΩ, as per IEC 60512-2-4

Isolation resistance

≥100M Ω between all contacts at 100 VDC, as per IEC 60512-2-10

Switch rating

Power rating

min. 12 VAC, 50 mA

max. 400 VAC, 10 A

Switch rating AC (cosφ 0,7), service category AC-11

Switch rating DC (inductive) L:R = 30 ms, service categorie DC-11

Electric strength

2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per

IEC 60512-2-11.

Environmental conditions

Storage temperature

-40 °C ... +95 °C

Service temperature

-25 °C ... +85 °C

Protection degree

Terminal/case IP 20

Front IP 65 as per IEC 60529

Shock resistance

50 g for 11 ms, as per IEC 60512-4-3

Vibration resistance

(sinusoidal)

10 g at 10 Hz ... 2000 Hz, amplitude 0.75 mm, as per IEC 60512-4-4

Approvals

Approbations

CB (IEC 61058)

CSA

ENEC (EN 61058)

VDE

Declaration of conformity

Actuator with snap-action switching element

Voltage 125 VAC 250 VAC 380 VAC

Current 8 A 5 A 3 A

Operations ≥100 000

Voltage 24 V 60 V 110 V 220 V

Current 6 A 1.5 A 0.4 A 0.2 A

Operations ≥100 000

Application guidelines

09.2009

When switching inductive loads such as relays, DC motors, and DC soleno ids, it is always important

to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched

off, a counter emf can severely damage switch contacts and greatly shorten lifetime.

Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling

diode provides a path for the inductor current to flow when the current is interrupted by the switch.

Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric break-

down voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude

even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2.

The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the

voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be

found in the datasheet of a diode. The forward current should be equal or greater than the maximum

current flowing through the load.

To get an efficient protection, the free-wheeling diode must be connected as close as possible

to the inductive load!

Suppressor circuits

Sveral hundred

to several

thousend volts

ON OFF

e = L di

VDC

Switch

Free-wheeling

diode

Inductive

load

Counter emf

over load without free-wheeling diode

Fig. 2

Switching with inductive load

Fig. 1

Marking

09.2009

All dimensions in mm

General notes

1. Engraving

In addition to the most commonly used world

languages, in DIN 1451-3 close spacing, other

typefaces are available as Scandinavian,

Slavic, Greek, Russian and Polish.

Red, blue and black lenses are filled with white

colour. Other colour lenses are filled in black.

Standard height of letters is 3 mm. If the height

is not specified, we will supply 3 mm engraved

letters.

2. Hot stamping

For larger series it is worth considering

markings by means of hot stamping We will

pleased to advise you.

For letters and figures, typefaces with 2.5 mm,

3 mm and 4 mm are available.

3. Film inserts

Instead of using engraving the lenses can be

fitted with transparent film inserts, as an

alternative. For this purpose, though, it is

advisible to use transparent lenses.

In the case of use of a smoke-black lens the

fitted film becomes readable only if the lamp is

on.

The film thickness is 0.2 mm.

Important : Consider pushbutton mounting

orientation befor specifying engraving

characters !

Film insert

max. size Height of letters

hNumber of lines Number of (target value)

capital letters

per line

Number of (target value)

small letters

per line

Image

14.3 x 22.4 3 4 11 13 B1

7 - 8 8 - 9 B2

4279B1

45 5 - 6 B2

525 - 6 6 - 7 B1

33 - 4 4 B2

6156B1

234B2

8134B1

22B2

ABC

abc

ABC

abc

B1 B2

Drawings

09.2009

1 Indicator actuator page 6 | Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 | Keylock switch

2 positions page 9

1 Protective cover page 11

2 Indicator actuator page 6

Mounting dimensions

Technical drawing

24 min.

-0.5

36 min.

10.5

13.7

29.7

18 36.5

59.5

Screw terminal

Plug-in terminal

7.5

1.5 ... 6

21.3

29.3

Drawings

09.2009

3 Illuminated pushb utton actuator page 7

4 Mushroom-head pushbutton actuator page 8

5 Keylock switch 2 positions page 9

59.5

Screw terminal

Plug-in terminal

7.5

1.5 ... 6

21.3

29.3

59.5

Screw terminal

Plug-in terminal

17.5

1.5 ... 6

21.3

29.3

59.5

Screw terminal

Plug-in terminal

32 1.5 ... 6

21.3

29.3

Drawings

09.2009

1 Indicator actuator page 6

2 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

3 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

4 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

5 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

6 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

7 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

Circuit drawing

11 x1-

22 x2+

21 x1-

22 x2+

13 x1-

14 x2+

13 21 x1-

14 x2+

13 23 x1-

14 x2+

11 x1-

22 x2+

Drawings

09.2009

8 Illuminated pushb utton actuator page 7 | Mushroom-head pushbutton actuator page 8

9 Illuminated pushb utton actuator page 7 | Mushroom-head pushbutton actuator page 8

10 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

11 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8

12 Keylock switch 2 positions page 9

13 Keylock switch 2 positions page 9

14 Keylock switch 2 positions page 9

15 Keylock switch 2 positions page 9

x1-

x2+

13 x1-

14 x2+

13 21 x1-

14 x2+

13 23 x1-

14 x2+

13 21

13 23

Drawings

09.2009

16 Keylock switch 2 positions page 9

17 Keylock switch 2 positions page 9

13 21

13 23

Index from Typ-Nr.

09.2009

Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page

02-904.0 .....................................13

02-904.1 .....................................13

02-904.3 .....................................13

02-904.7 .....................................13

02-905 ........................................13

02-912.1 .....................................13

02-912.2 .....................................13

02-912.3 .....................................13

02-912.4 .....................................13

02-965.0 .....................................10

02-967.0 .....................................10

10-1306.1349 .............................12

10-1307.1369 .............................12

10-1309.1309 .............................12

10-1310.1319 .............................12

10-1311.1249 .............................12

10-1312.1229 .............................12

10-1313.1209 .............................12

10-1313.1249 .............................12

10-1316.1179 .............................12

10-1316.1209 .............................12

10-1319.1179 .............................12

10-1319.1199 .............................12

10-2J06.3142 .............................12

10-2J06.3144 .............................12

10-2J06.3145 .............................12

10-2J06.3146 .............................12

10-2J06.3149 .............................12

10-2J09.1062 .............................12

10-2J09.1064 .............................12

10-2J09.1065 .............................12

10-2J09.1066 .............................12

10-2J09.1069 .............................12

10-2J12.1062 .............................12

10-2J12.1064 .............................12

10-2J12.1065 .............................12

10-2J12.1066 .............................12

10-2J12.1069 .............................12

10-2J13.1062 .............................12

10-2J13.1064 .............................12

10-2J13.1065 .............................12

10-2J13.1066 .............................12

10-2J13.1069 .............................12

10-2J19.1042 .............................12

10-2J19.1044 .............................12

10-2J19.1045 .............................12

10-2J19.1046 .............................12

10-2J19.1049 .............................12

22-040.001 ...................................6

22-040.004 ...................................6

22-211.011 ...................................7

22-211.011 ...................................8

22-211.014 ...................................7

22-211.014 ...................................8

22-212.011 ...................................7

22-212.011 ...................................8

22-212.014 ...................................7

22-212.014 ...................................8

22-213.011 ...................................7

22-213.011 ...................................8

22-213.014 ...................................7

22-213.014 ...................................8

22-214.011 ...................................7

22-214.011 ...................................8

22-214.014 ...................................7

22-214.014 ...................................8

22-215.011 ...................................7

22-215.011 ...................................8

22-215.014 ...................................7

22-215.014 ...................................8

22-221.011 ...................................7

22-221.011 ...................................8

22-221.014 ...................................7

22-221.014 ...................................8

22-222.011 ...................................7

22-222.011 ...................................8

22-222.014 ...................................7

22-222.014 ...................................8

22-223.011 ...................................7

22-223.011 ...................................8

22-223.014 ...................................7

22-223.014 ...................................8

22-224.011 ...................................7

22-224.011 ...................................8

22-224.014 ...................................7

22-224.014 ...................................8

22-225.011 ...................................7

22-225.011 ...................................8

22-225.014 ...................................7

22-225.014 ...................................8

22-331.111D ........ ................ .........9

22-331.114D ........ ................ .........9

22-331.311D ........ ................ .........9

22-331.314D ........ ................ .........9

22-331.511D ........ ................ .........9

22-331.514D ........ ................ .........9

22-333.111D ........ ................ .........9

22-333.114D ........ ................ .........9

22-333.311D ........ ................ .........9

22-333.314D ........ ................ .........9

22-333.511D ........ ................ .........9

22-333.514D ........ ................ .........9

22-335.111D ........ ................ .........9

22-335.114D ........ ................ .........9

22-335.311D ........ ................ .........9

22-335.314D ........ ................ .........9

22-335.511D ........ ................ .........9

22-335.514D ........ ................ .........9

22-351.111D ........ ................ .........9

22-351.114D ........ ................ .........9

22-353.111D ........ ................ .........9

22-353.114D ........ ................ .........9

22-355.111D ........ ................ .........9

22-355.114D ........ ................ .........9

22-901.0 .....................................10

22-901.2 .....................................10

22-901.3 .....................................10

22-901.4 .....................................10

22-901.5 .....................................10

22-901.6 .....................................10

22-901.8 .....................................10

22-901.9 .....................................10

22-903.1 .....................................10

22-903.2 .....................................10

22-903.3 .....................................10

22-903.4 .....................................10

22-903.5 .....................................10

22-903.6 .....................................10

22-903.7 .....................................10

22-905.2 .....................................10

22-905.4 .....................................10

22-905.5 .....................................10

22-905.7 .....................................10

22-925 ........................................11

22-930.0 .....................................10

22-930.2 .....................................10

22-930.4 .....................................10

22-930.5 .....................................10

22-938 ........................................13

22-949.0 .....................................11

31-989.300 .................................11

31-989.311 .................................11

61-9740.0 ...................................13

98-968 ........................................13

EAO AG

Tannwaldstrasse 88

4601 Olten, Switzerland

E-mail info@eao.com

Website www.eao.com

Austria

Phone +49 201 85 87 0

Fax +49 201 85 87 210

E-mail sales.ede@eao.com

Belgium

Phone +32 3 777 82 36

Fax +32 3 777 84 19

E-mail sales.ebl@eao.com

China

Phone +852 27 86 91 41

Fax +852 27 86 95 61

E-mail sales.ehk@eao.com

France

Phone +33 1 64 43 37 37

Fax +33 1 64 43 37 49

E-mail sales.ese@eao.com

Germany

Phone +49 201 85 87 0

Fax +49 201 85 87 210

E-mail sales.ede@eao.com

Italy

Phone +39 035 481 0189

Fax +39 035 481 3786

E-mail sales.eit@eao.com

Japan

Phone +81 3 5444 5411

Fax +81 3 5444 0345

E-mail sales.esj@eao.com

Netherlands

Phone +31 78 653 17 00

Fax +31 78 653 17 99

E-mail sales.enl@eao.com

Sweden

Phone +46 8 683 86 60

Fax +46 8 724 29 12

E-mail sales.esw@eao.com

Switzerland

Phone +41 62 388 95 00

Fax +41 62 388 95 55

E-mail sales.ech@eao.com

United Kingdom

Phone +44 1444 236 000

Fax +44 1444 236 641

E-mail sales.euk@eao.com

USA

Phone +1 203 877 4577

Fax +1 203 877 3694

E-mail sales.eus@eao.com

Other Countries

Phone +41 62 286 92 10

Fax +41 62 296 21 62

E-mail info@eao.com

EAO reserves the right to alter speciﬁcations without further notice