EAO - Your Expert Partner for Human Machine Interfaces EAO Product Information Series 22 Switches and Indicators 22 Contents 22 Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Devices raised mounting ............................................................................... 6 Accessories................................................................................................... 10 Technical Data............................................................................................... 14 Application guidelines.................................................................................. 15 Marking .......................................................................................................... 16 Drawings........................................................................................................ 17 Index............................................................................................................... 22 2 09.2009 22 Description Specimen order Product Information General notes The illuminated pushbuttons, keylock switches, mushroom pushbuttons with momentary or maintained action and indicators are primarily noteworthy for their degree of protection IP 65 of the front (i.e. dust and splash-proof). Their robust, compact design, mounting by one man, their screw and plug-in terminals proof against inadvertent contact, and their large surface area for engraving and illumination are other quality features. The switching element is a double-break snap-action system, the current being carried by a through-contact bar. The dimensions of the front bezel are 24 x 36 mm. For indicators and illuminated pushbuttons you can choose the design of the front to suit your requirements from two front bezels which clip on in different ways. The raised front bezel of keylock switches is fixed Typ-Nr. 02-967.0. 0 Indicator : - Indicator actuator, 24 x 36 mm, screw terminal 22-040.004 Essential accessories : - Lens plastic red, transparent 22-903.2 - Front bezel flush, black 22-965.0 - Single-LED, T1 3/4 MG, 24 VAC/DC, red 10-2J12.1062 We reserve the right to modify technical data All dimensions in mm Mounting Mounting by one man from the front. The switch, pushed into the square opening in the panel from the front, can be fixed with two clamping elements (tighten screws with max. 30 Ncm). Lenses The flat lenses, made of Polymethyl Methacrylate, are obtainable in various colours, as well as transparent or translucent. The lens has to be fitted in the unactuated position. Marking For further information about engraving, hot stamping and film inserts see part Marking. Illumination The T1 3/4 Midget Groove incandescent (filament) lamp (6 ... 48 V) ensures perfect illumination of the lenses, which are supplied in various colours. T1 3/4 Midget Groove Single-LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. For supply voltages above 48 V, it is necessary to use a voltage reduction element (external series resistor or transformer). Position indication The status of a maintained action switch can be determinded by the position of the lens. Keylock switch Standard lock (Index D). Standard lock number is 311. If the lock number is not specified, we will supply standard number 311. An additional 134 special locks (Index X) are available on request. Master keys for lock numbers 311 ... 445 may be ordered by quoting Typ-Nr. 31-989.300. Two keys are supplied with each keylock switch. Spare keys (Index D) for standard locks may be ordered by quoting TypNr. 31-989.xxx (please state the lock number). Number structure Nomenclature in accordance with ' IEC 61058 TEST REPORT '. The certification document we dispatch to them on demands. 3 09.2009 22 Product Assembly Indicator 0 1 2 1 2 3 4 5 6 Lens LED Front bezel clip-on Switch housing Sealing Front plate 1 2 3 4 5 6 Lens LED Front bezel clip-on Switch housing Sealing Front plate 3 4 5 6 Illuminated pushbutton 0 1 2 3 4 5 6 4 09.2009 22 Product Assembly Mushroom-head pushbutton 0 1 1 2 3 4 5 6 Mushroom-head cap LED Front bezel clip-on Switch housing Sealing Front plate 2 3 4 5 5 09.2009 22 Devices raised mounting Indicator actuator Essential Accessories: d Front bezel flush page 10 d d Lens plastic page 10 Single-LED page 12 Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19 6 09.2009 Circuit drawing PT 6.3 ST Technical drawing IP 65 a 24 x 36 mm Typ-Nr. 22-040.004 22-040.001 Mounting dimensions Indicator actuator Terminals Front protection Continuation see next page e 1 1 2 2 1 1 0.019 0.022 22 Devices raised mounting Illuminated pushbutton actuator Essential Accessories: d Front bezel flush page 10 d d Lens plastic page 10 Single-LED page 12 1 NC + 1 NO MA M 1 NO MA M 2 NC MA M 2 NO MA M Circuit drawing M PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST Technical drawing MA a 24 x 36 mm Typ-Nr. 22-222.014 22-222.011 22-212.014 22-212.011 22-225.014 22-225.011 22-215.014 22-215.011 22-221.014 22-221.011 22-211.014 22-211.011 22-224.014 22-224.011 22-214.014 22-214.011 22-223.014 22-223.011 22-213.014 22-213.011 Mounting dimensions SA Terminals IP 65 Contacts 1 NC Switching action Switching system Illuminated pushbutton actuator Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 8 8 5 5 10 10 4 4 9 9 2 2 7 7 6 6 11 11 0.032 0.037 0.032 0.037 0.034 0.044 0.034 0.044 0.032 0.037 0.032 0.037 0.034 0.044 0.034 0.044 0.044 0.044 0.034 0.044 Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19 7 09.2009 22 Devices raised mounting Mushroom-head pushbutton actuator Essential Accessories: d Front bezel flush page 10 d Mushroom-head cap page 10 M 1 NC + 1 NO MA M 1 NO MA M 2 NC MA M 2 NO MA M Terminals PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST PT 6.3 ST Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19 8 09.2009 Circuit drawing MA Technical drawing SA a 24 x 36 mm Typ-Nr. 22-222.014 22-222.011 22-212.014 22-212.011 22-225.014 22-225.011 22-215.014 22-215.011 22-221.014 22-221.011 22-211.014 22-211.011 22-224.014 22-224.011 22-214.014 22-214.011 22-223.014 22-223.011 22-213.014 22-213.011 Mounting dimensions Mushroom-head pushbutton actuator Contacts 1 NC Switching action Switching system Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 3 8 8 5 5 10 10 4 4 9 9 2 2 7 7 6 6 11 11 0.032 0.037 0.032 0.037 0.034 0.044 0.034 0.044 0.032 0.037 0.032 0.037 0.034 0.044 0.034 0.044 0.044 0.044 0.034 0.044 22 Devices raised mounting Keylock switch 2 positions ST 1 NO MA PT 6.3 ST 2 NO MA PT 6.3 ST Position A : Basic position Position C : Momentary action Standard lock 311 Front : Plastic black IP 65 SA 1 NC + 1 NO M 1 NO M 2 NO M PT 6.3 ST PT 6.3 ST PT 6.3 ST A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A A A A A A Circuit drawing PT 6.3 Technical drawing MA Key remove SA a 24 x 36 mm Typ-Nr. 22-335.114D 22-335.314D 22-335.514D 22-335.111D 22-335.311D 22-335.511D 22-331.114D 22-331.314D 22-331.514D 22-331.111D 22-331.311D 22-331.511D 22-333.114D 22-333.314D 22-333.514D 22-333.111D 22-333.311D 22-333.511D 22-355.114D 22-355.111D 22-351.114D 22-351.111D 22-353.114D 22-353.111D Mounting dimensions Keylock switch 2 positions Position A : Basic position Position C : Maintained action Standard lock 311 Front : Plastic black Contacts 1 NC + 1 NO Terminals Switching system IP 65 0 Switching action Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 16 16 16 16 16 16 15 15 15 15 15 15 17 17 17 17 17 17 13 13 12 12 14 14 0.046 0.046 0.046 0.051 0.051 0.051 0.046 0.044 0.040 0.051 0.044 0.044 0.046 0.046 0.046 0.051 0.051 0.051 0.046 0.051 0.046 0.051 0.046 0.051 Other lock numbers on request Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: PT 6.3 = Plug-in terminal 6.3 mm, ST = Screw terminal Mounting dimensions from page 17, Technical drawing from page 17, Circuit drawing from page 19 9 09.2009 22 Accessories Front Lens plastic Continuation see next page Lens plastic illuminative illuminative (not recommended for film insert) illuminative (not recommended for film insert, bright LED's are visible) non-illuminative Lens blue transparent colourless transparent green transparent orange transparent red transparent smoked transparent yellow transparent colourless transparent green transparent red transparent yellow transparent blue translucent green translucent orange translucent red translucent white translucent yellow translucent black opaque grey opaque a 24 x 36 mm Typ-Nr. 22-903.6 22-903.7 22-903.5 22-903.3 22-903.2 22-903.1 22-903.4 22-905.7 22-905.5 22-905.2 22-905.4 22-901.6 22-901.5 22-901.3 22-901.2 22-901.9 22-901.4 22-901.0 22-901.8 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 a 24 x 36 mm Typ-Nr. 22-930.0 22-930.5 22-930.2 22-930.4 0.006 0.006 0.006 0.006 a 24 x 36 mm Typ-Nr. 02-965.0 0.001 e Mushroom-head cap use Front bezel flush Continuation see next page Mushroom-head cap non-illuminative Mushroom had cap Plastic black opaque Plastic green opaque Plastic red opaque Plastic yellow opaque e Front bezel flush Continuation see next page Front bezel flush Front bezel Plastic black e Front bezel raised Lens only removable with lens remover 98-969 Continuation see next page Front bezel raised 10 09.2009 Front bezel Plastic black a 24 x 36 mm Typ-Nr. 02-967.0 e 0.001 22 Accessories Protective cover use Front bezel flush Technical drawing Continuation see next page e 1 0.004 a 24 x 36 mm Typ-Nr. 22-949.0 0.005 Typ-Nr. 31-989.300 0.006 Typ-Nr. 31-989.311 0.006 a 24 x 36 mm Typ-Nr. 22-925 Protective cover hinged, transparent, with means for sealing Technical drawing from page 17 Blind plug Continuation see next page Blind plug Mounting hole size 16 mm dia. Blind plug Plastic black e Master key Continuation see next page Master key Lock numbers 311 ... 445 (DOM) e Spare key Continuation see next page Spare key Key lock switch, standard lock 311 (DOM) e Other lock numbers on request 11 09.2009 22 Accessories > Illumination Filament lamp Continuation see next page Socket Filament lamp T1 3/4 MG Operating voltage/-current 12 VAC/DC, 75 mA 14 VAC/DC, 80 mA 18 VAC/DC, 40 mA 24 VAC/DC, 35 mA 28 VAC/DC, 30 mA 28 VAC/DC, 40 mA 36 VAC/DC, 20 mA 36 VAC/DC, 30 mA 48 VAC/DC, 20 mA 48 VAC/DC, 25 mA 6 VAC/DC, 120 mA 6.3 VAC/DC, 200 mA e Typ-Nr. 10-1309.1309 10-1310.1319 10-1311.1249 10-1312.1229 10-1313.1209 10-1313.1249 10-1316.1179 10-1316.1209 10-1319.1179 10-1319.1199 10-1306.1349 10-1307.1369 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Typ-Nr. 10-2J09.1066 10-2J12.1066 10-2J13.1066 10-2J19.1046 10-2J06.3146 10-2J09.1065 10-2J12.1065 10-2J13.1065 10-2J19.1045 10-2J06.3145 10-2J09.1062 10-2J12.1062 10-2J13.1062 10-2J19.1042 10-2J06.3142 10-2J09.1069 10-2J12.1069 10-2J13.1069 10-2J19.1049 10-2J06.3149 10-2J09.1064 10-2J12.1064 10-2J13.1064 10-2J19.1044 10-2J06.3144 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 Single-LED Continuation see next page Socket Single-LED T1 3/4 MG Light colour blue green red white diffuse yellow Operating voltage/-current 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 4/7 mA 24 VAC/DC, 4/7 mA 28 VAC/DC, 4/7 mA 48 VAC/DC, 2/4 mA 6 VDC, 7 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA Note: AC operation through halve-wave rectifier possible, slight flickering can occure. 12 09.2009 e 22 Accessories Series resistor for lamp voltage reduction Continuation see next page Series resistor 10 k, for filament lamp 48 VAC, 25 mA 2.7 k, for filament lamp 48 VAC, 25 mA 3.3 k, for filament lamp 48 VAC, 25 mA 4.7 k, for filament lamp 48 VAC, 25 mA e Operating voltage 230/240 V Typ-Nr. 02-904.7 0.003 110 V 125 V 145 V 02-904.0 02-904.1 02-904.3 0.003 0.003 0.003 Typ-Nr. 02-912.2 0.045 02-912.3 02-912.4 02-912.1 0.090 0.095 0.025 Typ-Nr. 02-905 0.011 98-968 0.004 Typ-Nr. 61-9740.0 0.003 Typ-Nr. 22-938 0.030 Please keep to the country specific security rules. Terminal plate empty for fitting with series resistors Continuation see next page Terminal plate empty 10 spaces 125 x 60 x 15 mm 15 spaces 187.5 x 60 x 15 mm 20 spaces 250 x 60 x 15 mm 5 spaces 62.5 x 60 x 15 mm e > Assembling Lens remover Continuation see next page Lens remover for flush front bezel for raised front bezel e Lamp remover Continuation see next page Lamp remover e CAUTION A switching process might be released when replacing the lamp/LED ! Dismantling tool for dismantling the lens from the holder Continuation see next page Dismantling tool e 13 09.2009 22 Technical Data Actuator with snap-action switching element Switch rating DC (inductive) L:R = 30 ms, service categorie DC-11 0 Switching system Self-cleaning, double-break, snap-action switching system (with contact gap 2 x 1.5 mm). Max. 2 normally closed or 2 normally open contacts, or one of each. Material Lens Polymetylmethacrylate PMMA, as per UL 94 HB, Polycarbonate (PC), as per UL 94 V0 Front bezel Polyphenylenoxide (PPO) Voltage Current Operations 24 V 6A 100 000 60 V 1.5 A Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11. Environmental conditions Storage temperature -40 C ... +95 C Protection degree Terminal/case IP 20 Front IP 65 as per IEC 60529 Actuator housing Polyamide (PA), Polytherimide (PEI) Shock resistance 50 g for 11 ms, as per IEC 60512-4-3 Mechanical characteristics Terminals Screw terminal (with self-lifting clip): Max. wire cross-section 2 x 2.5 mm Max. wire cross-section of stranded cable 2 x 1.5 mm Plug-in terminal 6.3 x 0.8 mm Actuating force with 1 switching element 3.6 N 0.3 N with 2 switching elements 6.8 N 0.3 N Actuating travel 5.5 mm 0.2 mm Vibration resistance (sinusoidal) 10 g at 10 Hz ... 2000 Hz, amplitude 0.75 mm, as per IEC 60512-4-4 Approvals Approbations CB (IEC 61058) CSA ENEC (EN 61058) UL VDE Declaration of conformity CE Travel 3 mm Rebound time 3 ms Mechanical lifetime Illuminated pushbutton 1 million operations Keylock switch 40 000 operations Electrical characteristics Contact resistance Starting value 50 m, as per IEC 60512-2-4 Isolation resistance 100M between all contacts at 100 VDC, as per IEC 60512-2-10 Switch rating Power rating min. 12 VAC, 50 mA max. 400 VAC, 10 A Switch rating AC (cos 0,7), service category AC-11 0 125 VAC 8A 100 000 14 09.2009 220 V 0.2 A Service temperature -25 C ... +85 C Material of contact Hard silver Voltage Current Operations 110 V 0.4 A 250 VAC 5A 380 VAC 3A 22 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2. The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load! 0 Counter emf over load without free-wheeling diode Fig. 2 Switching with inductive load Fig. 1 Switch ON OFF 0 VDC + _ Free-wheeling diode Inductive load Sveral hundred to several thousend volts e=L di __ dt 15 09.2009 22 Marking General notes 0 1. Engraving In addition to the most commonly used world languages, in DIN 1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. Red, blue and black lenses are filled with white colour. Other colour lenses are filled in black. Standard height of letters is 3 mm. If the height is not specified, we will supply 3 mm engraved letters. 2. Hot stamping For larger series it is worth considering markings by means of hot stamping We will pleased to advise you. For letters and figures, typefaces with 2.5 mm, 3 mm and 4 mm are available. 3. Film inserts Instead of using engraving the lenses can be fitted with transparent film inserts, as an alternative. For this purpose, though, it is advisible to use transparent lenses. In the case of use of a smoke-black lens the fitted film becomes readable only if the lamp is on. The film thickness is 0.2 mm. Important : Consider pushbutton mounting orientation befor specifying engraving characters ! All dimensions in mm 0 Film insert max. size Height of letters h Number of lines 14.3 x 22.4 3 4 4 2 4 2 3 1 2 1 6 8 0 16 09.2009 B1 B2 ABC abc ABC abc h 5 Number of (target value) capital letters per line 11 7-8 7 5 5-6 3-4 5 3 3 2 Number of (target value) small letters per line 13 8-9 9 5-6 6-7 4 6 4 4 2 Image B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 22 Drawings Mounting dimensions 0 22 -0.5 24 min. 1 Indicator actuator page 6 | Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 | Keylock switch 2 positions page 9 0 30 -0.5 36 min. Technical drawing 1 Protective cover page 11 36.5 13.7 30 29.7 18 10.5 36 24 21.3 2 Indicator actuator page 6 36 29.3 1.5 ... 6 7.5 59.5 71 Screw terminal Plug-in terminal 17 09.2009 22 Drawings 24 21.3 3 Illuminated pushbutton actuator page 7 36 29.3 1.5 ... 6 7.5 59.5 71 Screw terminal Plug-in terminal 24 21.3 4 Mushroom-head pushbutton actuator page 8 36 29.3 1.5 ... 6 17.5 59.5 71 Screw terminal Plug-in terminal 32 24 21.3 5 Keylock switch 2 positions page 9 36 29.3 1.5 ... 6 8 59.5 71 Screw terminal Plug-in terminal 18 09.2009 22 Drawings Circuit drawing 1 Indicator actuator page 6 2 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 11 21 x1- 12 22 x2+ 3 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 21 x1- 22 x2+ 4 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 13 x1- 14 x2+ 5 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 13 21 x1- 14 22 x2+ 6 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 13 23 x1- 14 24 x2+ 7 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 11 21 x1- 12 22 x2+ 19 09.2009 22 Drawings 8 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 21 x1- 22 x2+ 9 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 13 x1- 14 x2+ 10 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 13 21 x1- 14 22 x2+ 11 Illuminated pushbutton actuator page 7 | Mushroom-head pushbutton actuator page 8 13 23 x1- 14 24 x2+ 12 Keylock switch 2 positions page 9 13 14 13 Keylock switch 2 positions page 9 13 21 14 22 14 Keylock switch 2 positions page 9 13 23 14 24 15 Keylock switch 2 positions page 9 13 14 20 09.2009 22 Drawings 16 Keylock switch 2 positions page 9 13 21 14 22 17 Keylock switch 2 positions page 9 13 23 14 24 21 09.2009 Index from Typ-Nr. Typ-Nr. Page 02-904.0 .....................................13 02-904.1 .....................................13 02-904.3 .....................................13 02-904.7 .....................................13 02-905 ........................................13 02-912.1 .....................................13 02-912.2 .....................................13 02-912.3 .....................................13 02-912.4 .....................................13 02-965.0 .....................................10 02-967.0 .....................................10 10-1306.1349 .............................12 10-1307.1369 .............................12 10-1309.1309 .............................12 10-1310.1319 .............................12 10-1311.1249 .............................12 10-1312.1229 .............................12 10-1313.1209 .............................12 10-1313.1249 .............................12 10-1316.1179 .............................12 10-1316.1209 .............................12 10-1319.1179 .............................12 10-1319.1199 .............................12 10-2J06.3142 .............................12 10-2J06.3144 .............................12 10-2J06.3145 .............................12 10-2J06.3146 .............................12 10-2J06.3149 .............................12 10-2J09.1062 .............................12 10-2J09.1064 .............................12 10-2J09.1065 .............................12 10-2J09.1066 .............................12 10-2J09.1069 .............................12 10-2J12.1062 .............................12 10-2J12.1064 .............................12 10-2J12.1065 .............................12 10-2J12.1066 .............................12 10-2J12.1069 .............................12 10-2J13.1062 .............................12 10-2J13.1064 .............................12 10-2J13.1065 .............................12 10-2J13.1066 .............................12 10-2J13.1069 .............................12 10-2J19.1042 .............................12 10-2J19.1044 .............................12 10-2J19.1045 .............................12 10-2J19.1046 .............................12 10-2J19.1049 .............................12 22-040.001 ...................................6 22-040.004 ...................................6 22-211.011 ...................................7 22-211.011 ...................................8 22-211.014 ...................................7 22-211.014 ...................................8 22-212.011 ...................................7 22-212.011 ...................................8 22-212.014 ...................................7 22-212.014 ...................................8 22-213.011 ...................................7 22-213.011 ...................................8 22-213.014 ...................................7 22-213.014 ...................................8 22-214.011 ...................................7 22 09.2009 Typ-Nr. Page 22-214.011 ...................................8 22-214.014 ...................................7 22-214.014 ...................................8 22-215.011 ...................................7 22-215.011 ...................................8 22-215.014 ...................................7 22-215.014 ...................................8 22-221.011 ...................................7 22-221.011 ...................................8 22-221.014 ...................................7 22-221.014 ...................................8 22-222.011 ...................................7 22-222.011 ...................................8 22-222.014 ...................................7 22-222.014 ...................................8 22-223.011 ...................................7 22-223.011 ...................................8 22-223.014 ...................................7 22-223.014 ...................................8 22-224.011 ...................................7 22-224.011 ...................................8 22-224.014 ...................................7 22-224.014 ...................................8 22-225.011 ...................................7 22-225.011 ...................................8 22-225.014 ...................................7 22-225.014 ...................................8 22-331.111D .................................9 22-331.114D .................................9 22-331.311D .................................9 22-331.314D .................................9 22-331.511D .................................9 22-331.514D .................................9 22-333.111D .................................9 22-333.114D .................................9 22-333.311D .................................9 22-333.314D .................................9 22-333.511D .................................9 22-333.514D .................................9 22-335.111D .................................9 22-335.114D .................................9 22-335.311D .................................9 22-335.314D .................................9 22-335.511D .................................9 22-335.514D .................................9 22-351.111D .................................9 22-351.114D .................................9 22-353.111D .................................9 22-353.114D .................................9 22-355.111D .................................9 22-355.114D .................................9 22-901.0 .....................................10 22-901.2 .....................................10 22-901.3 .....................................10 22-901.4 .....................................10 22-901.5 .....................................10 22-901.6 .....................................10 22-901.8 .....................................10 22-901.9 .....................................10 22-903.1 .....................................10 22-903.2 .....................................10 22-903.3 .....................................10 22-903.4 .....................................10 Typ-Nr. Page 22-903.5 .....................................10 22-903.6 .....................................10 22-903.7 .....................................10 22-905.2 .....................................10 22-905.4 .....................................10 22-905.5 .....................................10 22-905.7 .....................................10 22-925 ........................................11 22-930.0 .....................................10 22-930.2 .....................................10 22-930.4 .....................................10 22-930.5 .....................................10 22-938 ........................................13 22-949.0 .....................................11 31-989.300 .................................11 31-989.311 .................................11 61-9740.0 ...................................13 98-968 ........................................13 Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail EAO reserves the right to alter specifications without further notice E-mail Website EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com