Audio/Video Switch
95
Description
95
2
01.2000
Fitting
The pushbutton should be plugged-in to the mounting hole and solde-
red onto the printed circuit board (PCB).
Construction
The large lens is available in two versions, convex or concave form.
The small lens is available only in flat form. The large pushbutton has
space for 3 SMD-LED‘s and the small one for 2 SMD-LED‘s.
Marking
The diffuser can be printed or engraved, or a film insert (use series 97
or 99 parts) can be fitted between the diffuser and the lens.
Mounting
Suitable for mounting on PCB‘s with thickness of 1.5 to 2.5 mm (use
SMD-LED‘s for illumination).
The separated spring clip contact holds the switch in place during the
assembly and soldering process.
The soldered joint makes the electrical contact and fixes the switch in
the PCB.
Maximum soldering-temperature is 260 °C for 5 seconds.
There is a solder stop between the SMD-LED‘s and the contact moun-
ting areas.
The PCB layout and mounting details are shown in the dimensional
drawings.
The switch must be used with a lens.
Switching system
Gold-plated momentary contact, 1 normally open, self-cleaning.
95
product assembly
3
03.2000
illuminated-/pushbutton
01lens
2Diffuser
3switching element
01lens
2Diffuser
3switching element
95
Pushbuttons for standard mounting
4
03.2000
contacts: normally open = NO
switching action: momentary action = M
technical drawings from page 8, mounting dimensions from page 8, component layouts from page 8
illuminated-/pushbutton
contacts
switching action
lens
b
19.05 x 19.05 mm
part no.
b
12.70 x 12.70 mm
part no.
technical drawing
mounting dimensions
component layout
e
illuminated-/pushbutton 1 NO Mneutral, flat 95-313.720 1110,003
neutral, concave 95-414.740 1110,004
neutral, convex 95-414.730 1110,004
5
01.2002
95
accessories
at front
lens
shape colour
b
19.05 x 19.05 mm
Typ-Nr.
b
12.70 x 12.70 mm
Typ-Nr. e
lens flat 95-704.720 95-703.720 0,001
95-704.750 95-703.750 0,001
concave 95-704.740 0,001
95-704.770 0,001
convex 95-704.730 0,001
95-704.760 0,001
diffuser
colour
b
19.05 x 19.05 mm
Typ-Nr.
b
12.70 x 12.70 mm
Typ-Nr. e
diffuser blue 95-804.620 95-803.620 0,001
yellow 95-804.420 95-803.420 0,001
grey 95-804.820 95-803.820 0,001
green 95-804.520 95-803.520 0,001
without 95-804.020 95-803.020 0,001
clear 95-804.720 95-803.720 0,001
orange 95-804.320 95-803.320 0,001
red 95-804.220 95-803.220 0,001
white 95-804.920 95-803.920 0,001
at back
switching element
contacts
b
19.05 x 19.05 mm
Typ-Nr.
b
12.70 x 12.70 mm
Typ-Nr. e
switching element
no lens/diffuser 95-414.000 0,003
95-313.000 0,002
6
01.2002
95
accessories
for large and small switches
for large and small switches
assembling
lens remover
part no. e
lens remover 95-900.005
mounting tool
part no. e
mounting tool 95-900.009
7
03.2000
95
technical data
material
plastic
PC / PEI self extinguishing as per UL 94 V0, Cd-free
material of contacts
CuSn, contact gold-plated, soldering terminal tinned
mechanical characteristics
actuating travel
4.5 mm
actuating force
3 N to end position
switching point
at 2.5 mm operation
life time
> 5 million operations as per IEC 512-5, test 9a
electrical characteristics
power rating
min. 1 mVDC/100 µA
max. 48 VDC/50 mA
electric strength
<= 50 mΩ as per IEC 512-2, test 2b
electric strength
2.5 kVAC as per IEC 512-2-11
Environmental characteristics
degree of protection
front as per IP40
operating temperature
-25°C to + 70°C
storage temperature
-40°C to + 80°C
resistance to vibration
10 g, at 10 - 2000 Hz, 0.75 mm as per IEC 512-4-4
resistance to shock
50 g/11 ms as per IEC 512-4-3
illumination
SMD-LED type
P-LCC package or similar, radiation angle approx. 120°;
use of smaller SMD-LED is possible
SMD-LED configurations size
max. 2 SMD-LED's
(switch size 12.70 mm)
max. 3 SMD-LED's
(switch size 19.05 mm)
single colour or multi-colour
circuit layout
see dimension drawing
tolerance of SMD-LED on the printed circuit board ±0.2 mm
height of SMD-LED
max. 2.1 mm
illuminated-/pushbutton
95
drawings
8
03.2000
1 illuminated-/pushbutton, switching element
page 4,
1 illuminated-/pushbutton
page 4
1 illuminated-/pushbutton
page 4
technical drawings
mounting dimensions
component layouts
