GO2927 DUAL CHANNEL VIDEO OPTICAL RECEIVER MODULE Datasheet name: GO2927_55588_doc2.pdf Contact information: info@embrionix.com www.embrionix.com GO2927 Dual Channel Video Optical Receiver Module Features Description * Best-in-class optical receiver sensitivity: -23dBm (over all supported video rates with pathological data) * Exceeds SMPTE 297-2006 specifications * Robust error free reception of signals from 50Mbps to 3Gbps * Supports SD-SDI, HD-SDI and 3G-SDI The GO2927 is a dual channel optical receiver module engineered for exceptional performance with SDI pathological patterns. The receivers feature best-in-class optical receive sensitivity for SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M serial rates, thus providing superior optical link budget and robustness. * Hot-pluggable * User writeable EEPROM * Digital diagnostics and control via the I2C interface including: Each receiver exceeds the SMPTE 297-2006 specifications and is designed to provide error-free reception of signals from 50Mbps to 3Gbps. The GO2927 is hot-pluggable. Monitoring of receive optical power, supply voltage and module temperature Alarm reporting Module ID polling * Single +3.3V power supply * RoHS compliant * Telcordia GR-468 compliant * Operating temperature range: 0C to 70C (case) * 56.5mm x 13.4mm x 8.6mm SFP Package The GO2927 provides extensive operational status monitoring through an I2C interface. For each receiver channel, input optical power is monitored. Other operating conditions such as supply voltage and operating temperature are also monitored. If a parameter monitored is outside the pre-defined range, the alarm flag associated with the parameter will be raised. Ordering Information Part Number Package Temperature Range GO2927-CM SFP TCASE = 0C to 70C Applications * SMPTE 297-2006 compatible optical-to-electrical interfaces * High-density video routers Figure A: GO2927 3G-SDI Dual Channel Video Optical Receiver Module GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 www.gennum.com 1 of 23 Revision History Version ECR Date 0 154502 July 2010 1 155910 March 2011 2 156192 April 2011 Changes and/or Modifications New document. Added EEPROM tables. Updated EEPROM Table 4-4 and Table 4-5. Contents Features.................................................................................................................................................................1 Description...........................................................................................................................................................1 Ordering Information.......................................................................................................................................1 Revision History .................................................................................................................................................2 1. Functional Block Diagram..........................................................................................................................3 2. Pin Specifications ..........................................................................................................................................4 2.1 Pin Configuration .............................................................................................................................4 2.2 Pin Descriptions ................................................................................................................................5 2.3 Host Board Power Supply Requirements .................................................................................6 2.4 Optical Connector Requirements ................................................................................................6 3. Product Specifications .................................................................................................................................7 3.1 Absolute Maximum Ratings ..........................................................................................................7 3.2 Optical Performance Specifications ...........................................................................................7 3.3 DC Electrical Specifications ..........................................................................................................8 3.4 AC Electrical Specifications ..........................................................................................................9 3.5 Supporting Circuit Specifications ...............................................................................................9 3.5.1 In-Rush Current Control Circuit ......................................................................................9 4. Digital Diagnosis......................................................................................................................................... 10 4.1 I2C Bus Interface ............................................................................................................................ 10 4.2 Serial Interface Memory Map .................................................................................................... 12 5. Application Reference Design ............................................................................................................... 18 5.1 Typical Application Circuit ........................................................................................................ 18 6. References and Relevant Standards .................................................................................................... 19 7. Package Information ................................................................................................................................. 20 7.1 Package Dimensions ..................................................................................................................... 20 7.2 PCB Layout Recommendations ................................................................................................. 21 GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 2 of 23 1. Functional Block Diagram Limiting AMP 1 Differential Electrical Output I2C Bus 1260 - 1620nm Receiver Input Power Monitoring Digital Diagnostics Differential Electrical Output ROSA_1 TIA + PIN Limiting AMP 2 ROSA_2 TIA + PIN 1260 - 1620nm Figure 1-1: GO2927 Functional Block Diagram GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 3 of 23 2. Pin Specifications 2.1 Pin Configuration Figure 2-1 shows the host board pad configuration for the GO2927. Figure 2-2 shows the edge connector pad configuration for the GO2927. Towards Bezel 1 VEE_RX2 NC 20 2 RD2- NC 19 3 RD2+ NC 18 4 VEE_RX2 VEE_RX2 17 5 I2C CLK VCC_RX2 16 6 2 I C DATA VCC_RX1 15 7 VEE_RX1 VEE_RX1 14 8 NC RD1+ 13 9 NC RD1- 12 10 NC VEE_RX1 11 Towards ASIC Figure 2-1: GO2927 Host Board Pad Configuration Top of Board Bottom of Board (as viewed through top of board) 20 NC 1 VEE_RX2 19 NC 2 RD2- 18 NC 3 RD2+ 17 VEE_RX2 4 VEE_RX2 16 VCC_RX2 5 I2C CLK 15 VCC_RX1 6 I2C DATA 14 VEE_RX1 7 VEE_RX1 13 RD+ 8 NC 12 RD- 9 NC 11 VEE_RX1 10 NC Figure 2-2: GO2927 Edge Connector Pad Configuration GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 4 of 23 2.2 Pin Descriptions Table 2-1 lists the pin descriptions for the GO2927. Table 2-1: Pin Descriptions Number Name Type Description 1 VEE_RX2 Ground Receiver Channel 2 Ground Connection 2 RD2- Output Negative Differential Output (AC-coupled internally) 3 RD2+ Output Positive Differential Output (AC-coupled internally) 4 VEE_RX2 Ground Receiver Channel 2 Ground Connection 5 I2C CLK Digital (Input) I2C Clock 6 I2C DATA Digital (Bi-Directional) I2C Data 7 VEE_RX1 Ground 8 NC No Connect No Connection 9 NC No Connect No Connection 10 NC No Connect No Connection 11 VEE_RX1 Ground Receiver Channel 1 Ground Connection 12 RD1- Output Negative Differential Output (AC-coupled internally) 13 RD1+ Output Positive Differential Output (AC-coupled internally) 14 VEE_RX1 Ground Receiver Channel 1 Ground Connection 15 VCC_RX1 Power Receiver Channel 1 Power Supply 16 VCC_RX2 Power Receiver Channel 2 Power Supply 17 VEE_RX2 Ground Receiver Channel 2 Ground Connection 18 NC No Connect No Connection 19 NC No Connect No Connection 20 NC No Connect No Connection Receiver Channel 1 Ground Connection NOTES: 1. All VEE signals are connected together inside the module. 2. VCC_RX1 and VCC_RX2 are independent supplies. GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 5 of 23 2.3 Host Board Power Supply Requirements The host board is required to provide a regulated and filtered power supply of 3.3V +/5% for the GO2927 via the on board SFP connector. Figure 2-3 shows the recommended board supply filtering. When the host board is loaded with a resistive load in place of the SFP module and sourcing the maximum rated current, the peak-to-peak power supply noise measured on the SFP connector should comply to Table 2-2. VCC_RX1 3.3V VCC_RX2 GO2927 Host Board Figure 2-3: Recommended Host Board Supply Filtering Table 2-2: Host Board Power Supply Noise Requirement at VCC_Rx Frequency (MHz) Peak-to-Peak Noise Amplitude (%) 0.02-1 2 1-10 3 2.4 Optical Connector Requirements An LC connector with PC/UPC polish is required for each port. GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 6 of 23 3. Product Specifications 3.1 Absolute Maximum Ratings Table 3-1 lists the absolute maximum ratings for the GO2927. Conditions exceeding the limits listed may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions outside those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Table 3-1: Absolute Maximum Ratings Parameter Conditions Value/Units Supply Voltage - 4.0V Operating Case Temperature - -20C < TCASE < 80C Storage Temperature - -40C < TSTG < 85C Receiver Optical Input Power - 5dBm ESD tolerance on all pins - 1kV HBM Relative Humidity (non-condensing) - 5% - 95% RH 3.2 Optical Performance Specifications Table 3-2 lists the optical performance specifications for the GO2927. Table 3-2: Optical Performance Specifications VCC = 3.3V 5%, TC = 0oC to 70oC. Typical values are at VCC = 3.3V, TA = 25oC unless otherwise specified. Parameter Symbol Condition Min Typ Max Unit Notes Wavelength - 1260 - 1620 nm - Sensitivity - ER=7dB - -25 -23 dBm 1 Overload - - 0 - - dBm 1 Loss of Signal Asserted - 2.97Gbps PRBS ER=7dB -31 - - dBm - Loss of Signal De-asserted - 2.97Gbps PRBS ER=7dB - - -23 dBm - Loss of Signal Optical Hysteresis - 2.97Gbps PRBS ER=7dB 0.5 - - dB - Maximum Back Reflection - - - - -27 dB - GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 7 of 23 Table 3-2: Optical Performance Specifications (Continued) VCC = 3.3V 5%, TC = 0oC to 70oC. Typical values are at VCC = 3.3V, TA = 25oC unless otherwise specified. Parameter Symbol Condition Min Typ Max Unit Notes - - -2 - 2 dB - Input Power Monitoring Accuracy NOTES 1. The sensitivity and overload specification refers to the input power levels for BER = 1E-12 against both PRBS and pathological patterns at SMPTE 259M, SMPTE 292M and SMPTE 424M rates. 3.3 DC Electrical Specifications Table 3-3 lists the DC electrical specifications for the GO2927. Figure 3-1 shows the definition of the differential signal level. Table 3-3: DC Electrical Specifications VCC = 3.3V 5%, TC = 0oC to 70oC. Typical values are at VCC = 3.3V, TA = 25oC unless otherwise specified. Parameter Symbol Condition Min Typ Max Unit Notes TCASE - 0 - 70 C 1 VCC - 3.13 3.3 3.47 V 1 - - - 600 700 mW - Vp-pDiff - 0.550 0.660 0.850 V 2 Operating Temperature Range Power Supply Voltage Total Power Consumption Differential Output Data Amplitude Digital Input Low VIL 0 - 0.8 V - Digital Input High VIH 2 - VCC V - NOTES 1. Outside the specified range, performance is not guaranteed. 2. Each leg must be terminated to a 50 (single-ended) termination. Signals are AC coupled internally within the module. VSE DATAP DATAN DATAP - DATAN V p-pDIFF = 2 x VSE 0V Figure 3-1: Definition of Differential Signal Level GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 8 of 23 3.4 AC Electrical Specifications Table 3-4 lists the AC electrical specifications for the GO2927. Table 3-4: AC Electrical Specifications VCC = 3.3V 5%, TC = 0oC to 70oC. Typical values are at VCC = 3.3V, TA = 25oC unless otherwise specified. Parameter Bit Rate Symbol Condition Min Max Units BR - 50 3000 Mbps Rise/Fall Time tr / tf 20% to 80% - 135 ps Time to Initialize t_init From power on - 300 ms Rx_LOS Assert Time t_loss_on Time from Rx_LOS state to Rx_LOS assert - 10 ms Rx_LOS Deassert Time t_loss_off Time from non-Rx_LOS state to Rx_LOS deassert - 10 ms - 400 kHz Serial ID Clock Rate f_serial_clock - 3.5 Supporting Circuit Specifications 3.5.1 In-Rush Current Control Circuit Due to the hot-pluggable requirement, the GO2927 has built-in circuits to limit the in-rush current upon hot insertion. The specifications of the in-rush limiting circuits are summarized in Table 3-5. Table 3-5: In-rush Current Limiting Circuits Specifications Parameter Value Maximum in-rush current ramp rate 50mA/ms Maximum in-rush current 30mA over steady state GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 9 of 23 4. Digital Diagnosis 4.1 I2C Bus Interface The I2C interface allows reading of diagnostic information from the module. It is comprised of I2C DATA and I2C CLK pins. All address and data bytes are transmitted through the I2C DATA pin. The I2C DATA and I2C CLK pins are open-collector and they must be pulled high (4.75k recommended) externally to the module. Data on the I2C DATA pin may only change during I2C CLK 'low' time periods. Data changes during I2C CLK 'high' periods will indicate either a START or STOP condition. Operations and conditions are described as follows: START Condition The START condition is originated by the host. A high-to-low transition of I2C DATA while I2C CLK 'high' defines a START condition that must precede any other command, see Figure 4-1. STOP Condition The STOP condition is originated by the host. A low-to-high transition of I2C DATA while I2C CLK 'high' defines a STOP condition, see Figure 4-1. START STOP I2C DATA I2C CLK Figure 4-1: I2C START and STOP Condition Acknowledge or ACK Condition The acknowledge condition occurs when the I2C DATA pin is pulled 'low' during the ninth clock pulse following an address or data byte. The module originates this condition after it has received a block or data address. The host originates this condition during a sequential address read operation. Addressing Operation The module must receive a block address following a START condition to enable a read operation. The block address is clocked into the module MSB to LSB. There are three read operations: current address read, random read, and sequential address read. Note that by the convention specified in the SFP MSA, 7-bit block addresses are left shifted by one bit when expressing them in hex. Block addresses for the different GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 10 of 23 memory regions are specified in Section 4.2. Block addresses A0h, A2h and B2h would therefore be transmitted defined as binary 1010000, 1010001 and 1011001 respectively. Current Address Read Operation The module has an internal register that maintains the data address used during the last read operation, incremented by one. If the most recent data address was FFh, then the register resets to 00h. Once the block address is clocked in by the host with the R/W bit set 'high', the module follows with an ACK condition, and the data byte located at the current data address is serially clocked out of the module MSB to LSB. The operation is terminated when the host does not provide an ACK condition and initiates a STOP condition. See Figure 4-2. START I2C DATA Block Address Read Data Byte STOP 7 6 5 4 3 2 1 R A 7 6 5 4 3 2 1 0 ACK Host driving data line NO ACK Module driving data line Figure 4-2: I2C Current Address Read Operation Random Address Read Operation A random read operation requires a dummy write sequence to load in the data address. Once the block and data addresses are clocked in by the host followed by an ACK condition provided by the module, the host must generate another START condition. The host now initiates a current address read operation by sending the block address with the R/W bit set 'high'. The module provides an ACK condition and serially clocks out the data byte. The operation is terminated when the host does not provide an ACK condition and initiates a STOP condition. See Figure 4-3. START I2C DATA Block Address Write START Data Address 7 6 5 4 3 2 1 W A 7 6 5 4 3 2 1 0 A ACK Host driving data line Block Address Read Data Byte STOP 7 6 5 4 3 2 1 R A 7 6 5 4 3 2 1 0 ACK ACK NO ACK Module driving data line Figure 4-3: I2C Random Access Read Operation Sequential Address Read Operation The sequential address read operation is initiated by either a current address read or random address read operation. After the host receives the first data byte, it responds with an ACK condition. As long as the module receives the ACK condition after a data byte is read, the host can clock out additional data bytes from the module. After the data address reaches FFh, it resets to 00h. The operation is terminated when the host does not provide an ACK condition and initiates a STOP condition. See Figure 4-4. GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 11 of 23 START I2C DATA Block Address Read Data Byte (N+1) Data Byte (N) Data Byte (N+M) STOP 7 6 5 4 3 2 1 R A 7 6 5 4 3 2 1 0 A 7 6 5 4 3 2 1 0 A 7 6 5 4 3 2 1 0 ACK ACK Host driving data line ACK NO ACK Module driving data line Figure 4-4: I2C Sequential Read Access Operation 4.2 Serial Interface Memory Map Module identification and digital diagnostic monitoring information is accessible through the memory map addresses shown in this section. The items below outline the different block addresses of the module: * Block address A0h contains serial ID information of the module. * Block address A2h contains alarm flags, warning flags, thresholds and real-time digital diagnostic features set for channel 1. * Block address B2h contains alarm flags, warning flags, thresholds and real-time digital diagnostic features set for channel 2. The 16-bit digital diagnostic monitoring information is internally calibrated over Gennum's specified operating temperature and voltage. Alarm and warning threshold values are calibrated in the same manner and can be interpreted as defined below. Internally measured module temperature is represented as a 16-bit signed two's complement value in increments of 1/256C, yielding a total range of -128C to +128C. To calculate the temperature, treat the two's complement value as a 16-bit unsigned integer and divide it by 256. If the result is greater or equal to 128, subtract 256 from the result. See Table 4-1 for temperature conversion examples. Table 4-1: Temperature Conversion Examples MSB (BIN) LSB (BIN) Temperature (C) 01000000 00000000 64C 01000000 00001111 64.059C 01011111 00000000 95C 11110110 00000000 -10C 11011000 00000000 -40C Internally measured module supply voltage is represented as a 16-bit unsigned integer with the voltage defined as the full 16-bit value with the LSB equal to 100V, yielding a total range of 0 to +6.55V. To calculate the supply voltage, multiply the 16-bit unsigned integer by 100V. Internally measured Rx optical power is represented as a 16-bit unsigned integer with the power defined as the full 16-bit value with the LSB equal to 0.1W, yielding a total GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 12 of 23 range of 0 to 6.5535mW (~ -40 to +8.2dBm). To calculate the Rx optical power, multiply the 16-bit unsigned integer by 0.1W. Table 4-2: Module Identification Fields Block Address: A0h Address Size Name Description and Value 0 1 Identifier Type of serial transceiver. 82h 1 1 Ext. Identifier Extended identifier of type of serial transceiver. 04h 2 1 Connector Code for connector type. 07h for LC connectors. 3 1 Standards Compliance 41h, for SMPTE259M/344M/292M/424M and SMPTE 297M. 4-10 8 Transceiver Code Code for electronic compatibility or optical compatibility. Not applicable for GO2927. 11 1 Encoding Code for serial encoding algorithm. Value: 03H for NRZ. 12 1 BR, Nominal Nominal bit rate, units of 100 Mbps, 1Eh for 3Gbps. 13 1 Reserved Xxh 14 1 Length (9mm) km Link length supported for standard SFM, units of km, 1Eh (at HD-SDI with GO2928). 15 1 Length (9mm) Link length supported for standard SFM, units of 100 m, 00h 16 1 Length (50mm) Link length supported for 50/125 mm fiber, units of 10 m. 00h 17 1 Length (62.5mm) Link length supported for 62.5/125 mm fiber, units of 10 m. 00h 18 1 Length (Copper) Link length supported for copper, units of meters. 00h 19 1 Reserved Xxh 20-35 16 Vendor name SFP with OM transceiver vendor name (ASCII). G E N N U M 20 1 G 47h 21 1 E 45h 22 1 N 4Eh 23 1 N 4Eh 24 1 U 55h 25 1 M 4Dh 26-35 10 - 20h for each byte GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 13 of 23 Table 4-2: Module Identification Fields (Continued) Block Address: A0h Address Size Name Description and Value 36 1 Reserved - 37-39 3 Vendor OUI SFP with OM transceiver vendor IEEE company ID. 00 0A DF 40-55 16 Vendor PN Part number provided by SFP with OM transceiver vendor. G O 2 9 2 7-C M 40 1 G 47h 41 1 O 4Fh 42 1 2 32h 43 1 9 39h 44 1 2 32h 45 1 7 37h 46 1 - 2Dh 47 1 C 43h 48 1 M 4Dh 49-55 8 - 20h 56-58 3 Reserved - 59 1 Vendor Rev Revision level for part number provided by vendor. 60-61 2 NA - 62 1 Reserved Xxh 63 1 CC_BASE Check code for Base ID fields. (The value of the lower 8 bits of the sum of the contents from address 0 to 62.) 64-65 2 Options Indicates which optional SFP with OM signals are implemented. 64 1 Reserved 00h 65 1 - 02h 66 1 BR, max Upper bit rate margin, units of %, 5h. 67 1 BR, min Lower bit rate margin, units of %, 5Fh. 68-83 16 Vendor SN Serial number provided by vendor (ASCII) 84-85 2 Year Manufacturing date code (ASCII). 86-87 2 Month Manufacturing date code (ASCII). 88-89 2 Day Manufacturing date code (ASCII). 90-91 2 Blank - GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 14 of 23 Table 4-2: Module Identification Fields (Continued) Block Address: A0h Address Size Name Description and Value 92 1 Calibration flag 28h for calibrated average input power 93 1 - 90h, Enhanced alarm/warning flags 94 1 Reserved Xxh 95 1 CC_EXT Check code for the Extended ID fields. (The value of the lower 8 bits of the sum of the contents from address 64 to 94.) 96-255 160 Reserved Vendor specific Table 4-3: Alarms and Warning Thresholds Block Address: A2h for Receive Channel 1, B2h for Receive Channel 2 Address Size Name Description and Value 0-1 2 Temp High Alarm MSB at lower address. 78C case temp 2-3 2 Temp Low Alarm MSB at lower address. -8C case temp 4-5 2 Temp High Warning MSB at lower address. 73C case temp 6-7 2 Temp Low Warning MSB at lower address. -3C case temp 8-9 2 Supply Voltage High Alarm MSB at lower address. 3.6V 10-11 2 Supply Voltage Low Alarm MSB at lower address. 3.0V 12-13 2 Supply Voltage High Warning MSB at lower address. 3.47V 14-15 2 Supply Voltage Low Warning MSB at lower address. 3.14V 16-31 16 N/A - 32-33 2 Rx Power High Alarm MSB at lower address. 0dBm. 34-35 2 Rx Power Low Alarm MSB at lower address. -25dBm. 36-37 2 Rx Power High Warning MSB at lower address. -1dBm. 38-39 2 Rx Power Low Warning MSB at lower address. -24dBm. 40-95 56 Reserved. - GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 15 of 23 Table 4-4: Alarms and Real Time Diagnostic information Block Address: A2h for Receive Channel 1, B2h for Receive Channel 2 Adress Size 96 1 97 1 Name Description and Value Temperature MSB Internally measured module temperature Temperature LSB Internally measured module temperature (approximately equal to case temperature) (approximately equal to case temperature) 98 1 VCC MSB Internally measured module supply voltage 99 1 VCC LSB Internally measured module supply voltage 100-103 4 N/A - 104 1 Rx Power MSB Internally measured Rx power 105 1 Rx Power LSB Internally measured Rx power 106-109 9 Reserved - 110 1 Reserved Bit 7-2 LOS Bit 1: Indicates Rx_LOS state Data_Ready Bit 0 Temp Update Bit 7 goes to high after a temperature update VCC Update Bit 6 goes to high after a VCC update Reserved Bit 5-4 Rx Power Update Bit 3 goes to high after a Rx input power update Reserved Bit 0-2 Temp High Alarm Flag Bit 7, set when the internal temperature exceeds the high temp alarm threshold Temp Low Alarm Flag Bit 6, set when the internal temperature goes below the low temp alarm threshold Supply Voltage High Alarm Flag Bit 5, set when the internal VCC exceeds the supply voltage high alarm threshold Supply Voltage Low Alarm Flag Bit 4, set when the internal VCC goes below the supply voltage low alarm threshold N/A Bit 0-3 Rx Power High Alarm Flag Bit 7, set when the monitored Rx power exceeds the Rx power high alarm threshold Rx Power Low Alarm Flag Bit 6, set when monitored Rx power current goes below the Rx power low alarm threshold Reserved Bit 0-5 111 112 113 1 1 1 GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 16 of 23 Table 4-4: Alarms and Real Time Diagnostic information (Continued) Block Address: A2h for Receive Channel 1, B2h for Receive Channel 2 Adress Size 114-115 2 Reserved - 116 1 Temp High Warning Flag Bit 7, set when the internal temperature exceeds the high temp warning threshold Temp Low Warning Flag Bit 6, set when the internal temperature goes below the low temp warning threshold Supply Voltage High Warning Flag Bit 5, set when the internal VCC exceeds the supply voltage high warning threshold Supply Voltage Low Warning Flag Bit 4, set when the internal VCC goes below the supply voltage low warning threshold N/A Bit 0-3 Rx Power High Warning Flag Bit 7, set when the monitored Rx power exceeds the Rx power high warning threshold Rx Power Low Warning Flag Bit 6, set when the monitored Rx power goes below the Rx power low warning threshold Reserved Bit 0-5 Reserved - 117 118-127 1 10 Name Description and Value Table 4-5: Writeable Area Block Address: A2h Address Size Name Description and Value of the Field 128-247 120 User Writeable Area - 248-255 8 Reserved - GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 17 of 23 5. Application Reference Design 5.1 Typical Application Circuit Figure 5-1 shows a typical application circuit for the GO2927. To GS2965 Reclocker Differential 20 RD2- NC 19 RD2+ NC 18 4 VEE VEE 17 5 I2C CLK VCC_RX2 16 VCC_RX1 15 VEE 14 VEE RD2- 2 RD2+ VCC_3V3 3 VCC_3V3 4.7k 4.7k I2C CLK I2C DATA GO2927 NC 1 6 I C DATA 7 VEE 8 NC RD1+ 13 9 NC RD1- 12 10 NC VEE 11 2 VCC_3V3 100nF 100nF RD1+ RD1- 100nF Differential To GS2965 Reclocker Figure 5-1: Typical Application Circuit GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 18 of 23 6. References and Relevant Standards Table 6-1: References and Relevant Standards INF-8074i Rev 1.0 SFP (Small Formfactor Pluggable) Transceiver SMPTE 259M-2008 SDTV Digital Signal/Data - Serial Digital Interface SMPTE 292M-2008 1.5 Gbps Signal / Data Serial Interface SMPTE 297-2006 Serial Digital Fiber Transmission System for SMPTE 259M, SMPTE 344M, SMPTE 292 and SMPTE 424M Signals SMPTE 344M-2000 540 Mbps Serial Digital Interface SMPTE 424M-2006 3 Gbps Signal/Data Serial Interface GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 19 of 23 7. Package Information 7.1 Package Dimensions A common mechanical outline, as shown in Figure 7-1, is used for all SFP modules. Figure 7-1: Common SFP Package Outline GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 20 of 23 7.2 PCB Layout Recommendations Notes: 1. Datum and basic dimensions established by customer 2. Pads and vias are chassis-ground in 11 places 3. Through-holes and plating are optional Figure 7-2: Host PCB Layout GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 21 of 23 Figure 7-3: Detailed Host PCB Layout GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 22 of 23 DOCUMENT IDENTIFICATION CAUTION DATA SHEET ELECTROSTATIC SENSITIVE DEVICES The product is in production. Gennum reserves the right to make changes to the product at any time without notice to improve reliability, function or design, in order to provide the best product possible. DO NOT OPEN PACKAGES OR HANDLE EXCEPT AT A STATIC-FREE WORKSTATION GENNUM CORPORATE HEADQUARTERS Phone: +1 (905) 632-2996 Fax: +1 (905) 632-2055 4281 Harvester Road, Burlington, Ontario L7L 5M4 Canada E-mail: corporate@gennum.com www.gennum.com OTTAWA SNOWBUSH IP - A DIVISION OF GENNUM GERMANY 415 Legget Drive, Suite 200 Kanata, Ontario K2K 3R1 Canada 439 University Ave. Suite 1700 Toronto, Ontario M5G 1Y8 Canada Hainbuchenstrae 2 80935 Muenchen (Munich), Germany Phone: +1 (613) 270-0458 Phone: +1 (416) 925-5643 Fax: +49-89-35804653 Fax: +1 (613) 270-0429 Fax: +1 (416) 925-0581 E-mail: gennum-germany@gennum.com CALGARY E-mail: sales@snowbush.com 3553 - 31st St. N.W., Suite 210 Calgary, Alberta T2L 2K7 Canada Web Site: http://www.snowbush.com Phone: +1 (403) 284-2672 UNITED KINGDOM MEXICO 288-A Paseo de Maravillas Jesus Ma., Aguascalientes Mexico 20900 Phone: +49-89-35831696 NORTH AMERICA WESTERN REGION Bayshore Plaza 2107 N 1st Street, Suite #300 San Jose, CA 95131 United States Phone: +1 (408) 392-9454 Phone: +1 (416) 848-0328 Fax: +1 (408) 392-9427 JAPAN KK E-mail: naw_sales@gennum.com NORTH AMERICA EASTERN REGION Fax: +44 1279 714171 Shinjuku Green Tower Building 27F 6-14-1, Nishi Shinjuku Shinjuku-ku, Tokyo, 160-0023 Japan INDIA Phone: +81 (03) 3349-5501 Phone: +1 (905) 632-2996 #208(A), Nirmala Plaza, Airport Road, Forest Park Square Bhubaneswar 751009 India Fax: +81 (03) 3349-5505 Fax: +1 (905) 632-2055 E-mail: gennum-japan@gennum.com E-mail: nae_sales@gennum.com Phone: +91 (674) 653-4815 TAIWAN Fax: +91 (674) 259-5733 6F-4, No.51, Sec.2, Keelung Rd. Sinyi District, Taipei City 11502 Taiwan R.O.C. South Building, Walden Court Parsonage Lane, Bishop's Stortford Hertfordshire, CM23 5DB United Kingdom Phone: +44 1279 714170 Web Site: http://www.gennum.co.jp 4281 Harvester Road Burlington, Ontario L7L 5M4 Canada KOREA 8F Jinnex Lakeview Bldg. 65-2, Bangidong, Songpagu Seoul, Korea 138-828 Phone: +82-2-414-2991 Phone: (886) 2-8732-8879 Fax: +82-2-414-2998 Fax: (886) 2-8732-8870 E-mail: gennum-korea@gennum.com E-mail: gennum-taiwan@gennum.com Gennum Corporation assumes no liability for any errors or omissions in this document, or for the use of the circuits or devices described herein. The sale of the circuit or device described herein does not imply any patent license, and Gennum makes no representation that the circuit or device is free from patent infringement. All other trademarks mentioned are the properties of their respective owners. GENNUM and the Gennum logo are registered trademarks of Gennum Corporation. (c) Copyright 2010 Gennum Corporation. All rights reserved. www.gennum.com GO2927 Dual Channel Video Optical Receiver Module Data Sheet 55588 - 2 April 2011 23 of 23 23 IMPORTANT NOTICE Embrionix Design inc. and its subsidiaries (Embrionix) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to Embrionix's terms and conditions of sale supplied at the time of order acknowledgment. Embrionix warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with Embrionix's standard warranty. Testing and other quality control techniques are used to the extent Embrionix deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. Embrionix assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using Embrionix SFP and emSFP. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. Embrionix does not warrant or represent that any license, either express or implied, is granted under any Embrionix patent right, copyright, mask work right, or other Embrionix intellectual property right relating to any combination, machine, or process in which Embrionix products or services are used. Information published by Embrionix regarding third-party products or services does not constitute a license from Embrionix to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from Embrionix under the patents or other intellectual property of Embrionix. Reproduction of Embrionix information in Embrionix data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. Embrionix is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of Embrionix products or services with statements different from or beyond the parameters stated by Embrionix for that product or service voids all express and any implied warranties for the associated Embrionix product or service and is an unfair and deceptive business practice. Embrionix is not responsible or liable for any such statements. Embrionix products are not authorized for use in safety-critical applications (such as life support) where a failure of the Embrionix product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Embrionix products in such safety-critical applications, notwithstanding any applicationsrelated information or support that may be provided by Embrionix. Further, Buyers must fully indemnify Embrionix and its representatives against any damages arising out of the use of Embrionix products in such safety-critical applications. Embrionix products are neither designed nor intended for use in military/aerospace applications or environments unless the Embrionix products are specifically designated by Embrionix as military-grade. Only products designated by Embrionix as military-grade meet military specifications. Buyers acknowledge and agree that any such use of Embrionix products which Embrionix has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. Embrionix products are neither designed nor intended for use in automotive applications or environments unless the specific Embrionix products are designated by Embrionix as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, Embrionix will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Embrionix products and Embrionix contact information: General website: Sales contact information: http://www.embrionix.com sales@embrionix.com Contact information: Telephone: http://www.embrionix.com/Contact.aspx 1.450.688.8171