39D
Vishay Sprague
Aluminum Capacitors
+ 85 °C, Powerlytic® Electrolytics
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42036
452 Revision: 22-Jul-08
FEATURES
•Designed for applications requiring greatest
possible capacitance in small physical case sizes
•Supplement original Type 36D can-type capacitors,
offering lower capacitance values in smaller sizes with
axial leads
•Welds at all critical anode and cathode terminals eliminate
riveted or pressure connections to assure freedom from
open circuits even when operated in the microvolt or
millivolt signal range
•Improved molded phenolic and seals
•Pressure-sensitive safety vent
•Service life of 10 years or more in normal circuit
applications
•Capacitors listed have outer plastic-film insulation. For
bare case, change last character of part number from 6 to
0 and subtract 0.062" [1.575 mm] from diameter and
0.125" [3.175 mm] from length
DIMENSIONS AND AVAILABLE FORMS
QUICK REFERENCE DATA
DESCRIPTION VALUE
Operating temperature - 20 °C to + 85 °C
Tolerance on CR:
3 WVDC to 75 WVDC
100 WVDC to 450 WVDC
+ 75 %, - 10 %
+ 50 %, - 10 %
Dissipation Factor:
3 WVDC and 6 WVDC 230 %
10 WVDC and 15 WVDC 150 %
25 WVDC and 30 WVDC 60 %
40 WVDC and 50 WVDC 45 %
75 WVDC and 100 WVDC 30 %
150 WVDC to 450 WVDC 18 %
Ripple current 20 to 3140 maximum
amperes rms at 120 Hz and
+ 120 °C, depending upon
capacitance
Useful life at 85 °C 500 hours
Fig.1 Component outlines
DIMENSIONS in inches [millimeters]
CASE
CODE
DL
CASE
CODE
DL
CASE
CODE
DL
± 0.020 [0.51] ± 0.062 [1.58] ± 0.020 [0.51] ± 0.062 [1.58] ± 0.020 [0.51] ± 0.062 [1.58]
EE 0.510 [13.0] 1.141 [29.0] GJ 0.760 [19.3] 1.641 [41.7] JE 1.010 [25.7] 1.141 [29.0]
EJ 0.510 [13.0] 1.641 [41.7] GL 0.760 [19.3] 2.141 [54.4] JJ 1.010 [25.7] 1.641 [41.7]
EL 0.510 [13.0] 2.141 [54.4] GP 0.760 [19.3] 2.641 [67.1] JL 1.010 [25.7] 2.141 [54.4]
FE 0.635 [16.1] 1.141 [29.0] HE 0.885 [22.5] 1.141 [29.0] JP 1.010 [25.7] 2.641 [67.1]
FJ 0.635 [16.1] 1.641 [41.7] HJ 0.885 [22.5] 1.641 [41.7] JS 1.010 [25.7] 3.141 [79.8]
FL 0.635 [16.1] 2.141 [54.4] HL 0.885 [22.5] 2.141 [54.4] JT 1.010 [25.7] 3.641 [92.5]
FP 0.635 [16.1] 2.641 [67.1] HP 0.885 [22.5] 2.641 [67.1] - - -
GE 0.760 [19.3] 1.141 [29.0] HS 0.885 [22.5] 3.141 [79.8] - - -
L
PVC sleeve
2.50
[63.50]
min.
D
C
L
Dia. (No. 18 AWG)
0.040
1.016
Tinned copper leads
2.50
[63.50]
min.