© 2000 Sensitron Se miconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@sensitron .com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 822, REV. B.2
FORMERLY PART NUMBER - SHD3264/P/N/D
HERMETIC ULTRAFAST RECTIFIER
SINGLE / DUAL - COM. CATHODE / COM. ANODE / DOUBLER
DESCRIPTION: A 600 VOLT, 16 AMP, 30 NANOSECOND, RECTIFIER IN A HERMETIC TO-257 PACKAGE.
9 Add Suffix "S" to the Part Number for S-100 Screening
9 Add Suffix "B" to the Part Number for Lead Bending Option
MAXIMUM RATINGS ALL RATINGS AR E AT TA = 25 C) UNLESS OTHERWISE SPECIFIED
RATING SYMBOL MAX. UNITS
PEAK INVERSE VOLTAGE (PER LEG) PIV 600 Volts
MAXIMUM DC OUTPUT CURRENT (TC = 100 OC) IO 16 Amps
PEAK SINGLE CYCLE SURGE CURRENT t p = 8.3 mseconds IFSM 75 Amps
MAXIMUM THERMAL RESISTANCE (PER LEG) RθJC 3.7 °C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Top/stg -65to
+150 °C
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC SYMBOL MAX. UNITS
MAXIMUM FORWARD VOLTAGE DROP @ TA = 25°(PER LEG)
SI NGLE / COMMON CA THODE (P)
COMMON ANODE (N) / DOUBLER (D)
(I f = 16 Amps)
Vf
1.70
1.75
Volts
MAXIMUM FORWARD VOLTAGE DROP @ TA = 125° (PER LEG)
SI NGLE / COMMON CA THODE (P)
COMMON ANODE (N) / DOUBLER (D)
(I f = 16 Amps)
Vf
1.65
1.70
Volts
MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) @ TA = 25° Ir 25
μA
MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) @ TA = 125° Ir 2.0 mA
MAXIMUM REVERSE RECOVERY TIME (If = 0.5A, Ir = 1. 0A, Irr = 0.25A) trr 30 nsec
SHD326123
SHD326123P
SHD326123N
SHD326123D
© 2000 Sensitron Se miconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@sensitron .com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 822, REV. B.2
MECHANICAL DIMENSIONS: In Inches / mm
PINOUT TABLE
SHD326123
SHD326123P
SHD326123N
SHD326123D
123
.200
.190 (5.08
4.82)
.045
.035 (1.14
0.89)
.120(3.05) BSC
.430
.410 (10.92
10.41)
.420
.410 (10.67
10.41)
.665
.645 (16.89
16.38)
.537
.527 (13.64
13.39)
1.132
1.032 (28.75
26.21)
.035
.025 (0.89
0.63)
3 Places
.100(2.54) BSC
2 Places
.150
.140 (3.81
3.56) Dia.
TO-257
DEVICE TYPE PIN 1 PIN 2 PIN 3
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON AN ODE ( N)
DUAL RECTIFIER/DOUBLE R (D)
CATHODE
ANODE 1
CATHODE 1
ANODE
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/ CATHODE
ANODE
ANODE 2
CATHODE 2
CATHODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by u sing semiconductor devices that f eature assure d s afety or by me an s of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be li able for any failure in a semiconductor device or any secondary da mage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
