Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company PNP SILICON PLANAR SWITCHING TRANSISTORS 2N3905 2N3906 TO-92 CBE General Purpose Switching And Amplifier Applications ABSOLUTE MAXIMUM RATINGS(Ta=25deg C unless otherwise specified) DESCRIPTION SYMBOL VALUE VCEO 40 Collector -Emitter Voltage VCBO 40 Collector -Base Voltage VEBO 5.0 Emitter -Base Voltage IC 200 Collector Current Continuous PD 625 Power Dissipation Ta=25 degC 5.0 Derate Above 25deg C PD 1.5 Power Dissipation Tc=25 degC 12 Derate Above 25deg C Tj, Tstg -55 to +150 Operating And Storage Junction Temperature Range THERMAL RESISTANCE Junction to Case Junction to Ambient Rth(j-c) Rth(j-a) 125 200 ELECTRICAL CHARACTERISTICS (Ta=25 deg C Unless Otherwise Specified) DESCRIPTION SYMBOL TEST CONDITION VCEO IC=1mA,IB=0 Collector -Emitter Voltage VCBO IC=10uA.IE=0 Collector -Base Voltage VEBO IE=10uA, IC=0 Emitter-Base Voltage ICEX VCE=30V, VEB=3V Collector-Cut off Current IBL VCE=30V, VEB=3V Base-Cut off Current hFE* IC=0.1mA,VCE=1V DC Current Gain IC=1mA,VCE=1V IC=10mA,VCE=1V IC=50mA,VCE=1V IC=100mA,VCE=1V Collector Emitter Saturation Voltage VCE(Sat)* IC=10mA,IB=1mA IC=50mA,IB=5mA VBE(Sat) * IC=10mA,IB=1mA Base Emitter Saturation Voltage IC=50mA,IB=5mA Continental Device India Limited UNITS V V V mA mW mW/deg C W mW/deg C deg C Data Sheet deg C/W deg C/W 2N3905 >40 >40 >5.0 <50 <50 >30 >40 50-150 >30 >15 <0.25 <0.4 0.65-0.85 <0.95 2N3906 >40 >40 >5.0 <50 <50 >60 >80 100-300 >60 >30 <0.25 <0.4 0.65-0.85 <0.95 UNITS V V V nA nA Page 1 of 4 V V V V ELECTRICAL CHARACTERISTICS (Ta=25 deg C Unless Otherwise Specified) DESCRIPTION SYMBOL TEST CONDITION SMALL SIGNAL CHARACTERISTICS ft IC=10mA, VCE=20V Transistors Frequency f=100MHz Cob VCB=5V, IE=0 Output Capacitance f=100kHz Cib VEB=0.5V, IC=0 Input Capacitance f=100kHz ALL f=1kHz hfe IC=1mA, VCE=10V Small Signal Current Gain hie IC=1mA, VCE=10V Input Inpedence hoe IC=1mA, VCE=10V Out put Adimttance hre IC=1mA, VCE=10V Voltage Feedback Ratio NF IC=100uA, VCE=5V Noise Figure Rs=1kohm f=10Hz to 15.7 kHz 2N3905/3906 2N3905 2N3906 UNITS >200 >250 MHz <4.5 <4.5 pF <10 <10 PF 50-200 0.5-8.0 1.0-40 0.1-5.0 <5.0 100-400 2.0-12 3.0-60 0.1-10 <4.0 khoms umhos x10-4 dB SWITCHING Time Delay time Rise time td tr VCC=3V,VBE=0.5V IC=10mA, IB1=1mA <35 <35 <35 <35 ns ns Storage time Fall time ts tf VCC=3V,IC=10mA IB1=1B2=1mA <200 <60 <225 <75 ns ns *Pulse Condition: =300us, Duty Cycle=2% Continental Device India Limited Data Sheet Page 2 of 4 TO-92 Plastic Package B TO-92 Transistors on Tape and Ammo Pack Amm o Pack Style M EC H AN IC AL D ATA A h h D C arrier Strip P T FE E Ad hesive Tape on To p Sid e (p) A1 LA BE L A FL AT SIDE 8.2" 3 2 1 H1 W2 H0 L Wo W1 W 1 3" t1 F1 t F2 Do K F 1.7 7" P2 Po D All dim ensions in m m unless specified otherw ise 3 E D A A PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER All diminsions in mm. C 3 2 1 H F F 2 1 SEC AA G Flat S id e o f Tran sistor and Ad hesive Tape Visib le 20 00 pcs./A m mo P ack DIM MIN. MAX. A 4.32 5.33 B C D E 4.45 3.18 0.41 0.35 5.20 4.19 0.55 0.50 F G H K 5 DEG 1.14 1.40 1.14 1.53 12.70 -- ITEM SYM BO L BOD Y W IDT H BOD Y H EIG HT BOD Y T HICKNESS PITCH OF C OM PO NENT FEED HO LE PIT CH A1 A T P Po FEED HO LE CENTRE TO CO M PONENT CENTRE P2 DISTAN CE BETW EEN O UTER LEADS CO M PONENT ALIGN M EN T TAPE W IDTH HO LD-DO W N TAPE W IDTH HO LE PO SITIO N F h W Wo W1 HO LD-DO W N TAPE POSIT IO N LEAD W IRE C LINCH HEIG HT CO M PONENT HEIGHT LENG TH O F SNIPPED LEADS FEED HO LE DIAM ET ER TO TAL TAPE THIC KNESS LEAD - TO - LEAD DISTANCEF 1, W2 Ho H1 L Do t F2 CLINC H HEIGHT PULL - O UT F OR CE H2 (P) SPEC IFICATIO N REM ARKS M IN. NO M . M AX. TO L . 4.0 4.8 5.2 4.8 4.2 3.9 12.7 1 12.7 0.3 CUM U LAT IVE PIT CH ERRO R 1.0 m m /20 PITCH 6.35 0.4 TO BE M EASU RED AT BOT TOM O F CLIN CH +0.6 5.08 -0.2 0 1 AT TO P OF BO DY 18 0.5 6 0.2 9 +0.7 -0.5 0.5 0.2 16 0.5 23.25 11.0 4 0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N N OT ES 1 . M A X IM U M A L IG N M E N T D E V IAT IO N B E T W E E N L E A D S N O T T O B E G R E AT E R T H A N 0 .2 m m . 2 . M A X IM U M N O N -C U M U L AT IV E VA R IAT IO N B E T W E E N TA P E F E E D H O L E S S H A L L N O T E X C E E D 1 m m IN 2 0 P IT C H E S . 3 . H O L D D O W N TA P E N O T TO E X C E E D B E Y O N D T H E E D G E (S ) O F C A R R IE R TA P E A N D T H E R E S H A L L B E N O E X P O S U R E O F A D H E S IV E . 4 . N O M O R E T H A N 3 C O N S E C U T IV E M IS S IN G C O M P O N E N T S A R E P E R M IT T E D . 5 . A TA P E T R A IL E R , H AV IN G AT L E A S T T H R E E F E E D H O L E S A R E R E Q U IR E D A F T E R T H E L A S T C O M P O N E N T. 6 . S P L IC E S S H A L L N O T IN T E R F E R E W IT H T H E S P R O C K E T F E E D H O L E S . Packing Detail PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size 1K/polybag 2K/ammo box 200 gm/1K pcs 645 gm/2K pcs 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" 5.0K 2.0K 17" x 15" x 13.5" 17" x 15" x 13.5" Continental Device India Limited Data Sheet Qty Gr Wt 80.0K 32.0K 23 kgs 12.5 kgs Page 3 of 4 Notes Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 email@cdil.com www.cdilsemi.com Continental Device India Limited Data Sheet Page 4 of 4