SANblade
QLE2360/
QLE2362
TECHNICAL SPECIFICATIONS
PX2458001-00 C 06/04 PRELIMINARY
Host Bus Interface Specifications
Speed 2.5 GHz PCI Express x4
Voltage 3.3 V
Compliance PCI Express Base Specification rev. 1.0a, PCI Express Card Electromechanical Specification rev. 1.0, PCI Local Bus Specification rev. 2.3, PCI Bus Power Management Interface
Specification rev. 1.1
Fibre Channel Specifications
Speed 200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex
Compliance Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH),
SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR
Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS), SCSI-3 Architecture Model (SAM), and SCSI-3 Controller Command Set
Topology FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Class of service Class 3 Fibre Channel service
Protocol SCSI-FCP, IP, FC-TAPE
Buffer credits For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued.
Physical Specifications
Ports One (QLE2360)
Two (QLE2362)
Media Multimode optic
Optics Short wave laser
Form factor Half size: 16.76 cm×11.12 cm (6.6"×4.376")
Bracket size Standard size
Connectors LC-style connectors that support non-OFC, multimode fibre optic cabling using a small form factor optical transceiver modules (one in the QLE2360, two in the QLE2362)
Environment and Equipment Specifications
Airflow TBD
Temperature TBD
Humidity Relative (noncondensing): 10% to 90%, Storage: 5% to 95%
Power
consumption
TBD
Distance 1 Gbps: 500 meters 50/125 µm fiber, 300 meters 62.5/125 µm fiber
2 Gbps: 300 meters 50/125 µm fiber, 150 meters 62.5/125 µm fiber
Cable 50/125µm multimode fiber, 62.5/125 µm multimode fiber
Software
SANblade
Manager
Easy to use, Java-based, configuration, diagnostics and analysis HBA management application for heterogeneous SAN management across multiple hosts. Includes failover, LUN
masking, and persistent binding capabilities.
SANblade Control
FX
Wizard-based application provided for installation, configuration, persistent binding, and diagnostic functions on the local host.
SANblade CLI Command line interface (CLI) based application provided for installation, configuration, persistent binding, and diagnostic functions on the local host.
Operating system
drivers
Windows Server 2003 (32-bit and 64-bit), Windows 2000, Linux (32-bit and 64-bit), Novell NetWare
Flash utilities Configuration utilities resident with boot code (BIOS and EFI)
Boot support Intel x86: BIOS (32-bit), EFI (64-bit)
Ordering Information
QLE2360 Ships to OEMs and channel in an individually packed box with a standard size bracket.
QLE2360-BK Ships to OEMs in a bulk box in quantities of 20, 50, or 100 with a standard size bracket.
QLE2362 Ships to OEMs and channel in an individually packed box with a standard size bracket.
QLE2362-BK Ships to OEMs in a bulk box in quantities of 20, 50, or 100 with a standard size bracket.
QLogic Corporation • 26650 Aliso Viejo Parkway • Aliso Viejo, CA 92656 • (800) 662-4471 or (949) 389-6000
© 2004 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, the powered by QLogic logo, and QLA are registered trademarks of QLogic Corporation. SANblade, SANsurfer
Management Suite, and SANtrack are trademarks of QLogic Corporation, which may be registered in some jurisdictions. All other brand and product names are trademarks or registered trademarks of their respective owners.
www.qlogic.com