Ordering number:ENN1251A NPN Triple Diffused Planar Silicon Transistor 2SC3183 800V/0.2A Switching Regulator Applications Features Package Dimensions * High breakdown voltage (VCBO900V). * High-speed switching. * Wide ASO. unit:mm 2010C [2SC3183] 10.2 3.6 4.5 5.1 18.0 15.1 6.3 2.7 1.3 14.0 5.6 1.2 0.8 2 1 : Base 2 : Collector 3 : Emitter SANYO : TO-220AB 3 2.7 1 0.4 2.55 Specifications 2.55 Absolute Maximum Ratings at Ta = 25C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Conditions Ratings Unit VCBO VCEO 900 V 800 V VEBO IC 7 V 0.2 A Collector Current (Pulse) ICP PW300s, Duty Cycle10% Collector Dissipation PC Tc=25C Junction Temperature Tj Storage Temperature Tstg 1 A 25 W 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=800V, IE=0 10 A Emitter Cutoff Current IEBO VEB=5V, IC=0 10 A hFE1 VCE=5V, IC=20mA DC Current Gain hFE2 VCE(sat) Collector-to-Emitter Saturation Voltage 10* VCE=5V, IC=100mA IC=100mA, IB=20mA 40* 8 2.0 V Continued on next page. * : The hFE1 of the 2SC3183 is classified as follows. When specifying the hFE1 rank, specify two ranks or more in principle. Rank K L M hFE 10 to 20 15 to 30 20 to 40 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 51304TN (PC)/N3098HA (KT)/4217KI/9073KI, TS No.1251-1/4 2SC3183 Continued from preceding page. Parameter Symbol Gain-Bandwidth Product fT Cob Output Capacitance Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Collector-to-Emitter Sustain Voltage Collector-to-Emitter Sustain Voltage Ratings Conditions min typ Unit max VCE=10V, IC=20mA 15 MHz VCB=10V, f=1MHz 10 pF V(BR)CBO IC=1mA, IE=0 V(BR)CEO IC=1mA, RBE= V(BR)EBO IE=1mA, IC=0 900 V 800 V 7 V VCEO(sus) IC=0.2A, IB=0.04A, L=10mH I =0.2A, IB1=0.04A, IB2=-0.04A, L=10mH, VCEX(sus) C clamped 800 V Turn-ON Time Storage Time Fall Time 900 V ton tstg IC=200mA, IB1=40mA, IB2=-80mA IC=200mA, IB1=40mA, IB2=-80mA 1.0 s 3.0 s tf IC=200mA, IB1=40mA, IB2=-80mA 1.0 s Switching Time Test Circuit PW=20s D.C.1% IB1 D.U.T RB INPUT OUTPUT IB2 VR 50 2k 470F 100F 400V --5V IC -- VCE A 5.0m m 4.5 A 4.0mA 3.5mA 80 2.5mA 2.0mA 40 1.5mA 1.0mA 20 4 6 8 A 20m 15mA 10mA 120 100 5mA 80 60 40 20 IB=0 0 10 2 0 Collector-to-Emitter Voltage, VCE - V ITR05446 IC -- VBE 0.24 2 3 140 IB=0 2 5mA 160 0.5mA 0 A 0m 180 3.0mA 60 0 IC -- VCE 200 Collector Current, IC - mA Collector Current, IC - mA 100 VCE=5V 4 6 8 10 Collector-to-Emitter Voltage, VCE - V ITR05447 hFE -- IC 100 VCE=5V 7 5 DC Current Gain, hFE 0.12 --40C 0.16 25C Ta=120C Collector Current, IC - A 0.20 0.08 Ta=120C 3 25C 2 --40C 10 7 5 3 0.04 2 0 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE - V 1.2 ITR05448 1.0 0.001 2 3 5 7 0.01 2 3 5 Collector Current, IC - A 7 0.1 2 3 ITR05449 No.1251-2/4 2SC3183 VCE(sat) -- IC 10 IC / IB=5 7 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 3 2 Ta=-40 C 120 C Collector-to-Emitter Saturation Voltage, VCE (sat) - V 7 1.0 7 5 5 3 2 1.0 3 C 25 2 0.1 7 5 0.001 2 3 5 7 0.01 2 3 5 2 7 0.1 Collector Current, IC - A 3 2 7 0.1 3 ITR05451 ICP=1.0A 10 s 0 3 IC=0.2A s DC s 2 0.1 7 3 5 0 5 2 30 to n 7 0.01 ms 10 tf 7 5 Collector Current, IC - A 1m 2 1.0 3 Forward Bias A S O 1.0 7 5 tstg 3 2 2 Collector Current, IC - A 5 25C 120C 5 ITR05450 VCC=400V R load IC=5IB1=--2.5IB2 7 Ta=--40C 7 3 0.001 3 SW Time -- IC 10 Switching Time, SW time - s VBE(sat) -- IC 10 IC / IB=5 op era 5 tio n 3 2 2 0.01 7 5 0.1 0.01 2 3 5 7 2 0.1 Collector Current, IC - A 3 Collector Dissipation, PC - W Collector Current, IC - A 7 5 3 2 0.1 7 5 3 5 7 100 2 2 3 5 7 100 2 3 5 7 1000 Collector-to-Emitter Voltage, VCE - V ITR05453 PC -- Ta 25 24 20 16 12 8 4 IC=5IB1=--5IB2 --IB2=40mA(IC>0.2A) 0.01 10 28 1.0 2 7 ITR05452 Reverse Bias A S O 2 Single pulse 5 0 3 5 7 1000 Collector-to-Emitter Voltage, VCE - V 2 ITR05454 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 150 160 ITR05455 No.1251-3/4 2SC3183 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 2004. Specifications and information herein are subject to change without notice. PS No.1251-4/4