REVISION G DO NOT SCALE FROM THIS PRINT PHT-1XX-XX-X-X-XXX DESIGNED & DIMENSIONED IN INCHES[MILLIMETERS] No OF POSITIONS -01 (SINGLE ROW ONLY) -02 THRU -50 (PER ROW) "A" 0.01[0.25] (SEE NOTE 2) C .050 1.26 REF LEAD STYLE -01: (USE T-1S58-01-X) -02: (USE T-1S58-02-X) -03: (USE T-1S58-03-X) -04: (USE T-1S58-04-X) "B" "B" "A" CL 01 02 "B" ASP-81370-01 POLARIZATION OPTION -XXX INDICATES POSITION ROW SPECIFICATION -S: SINGLE -D: DOUBLE PLATING SPECIFICATION -S: SELECTIVE, .000030 GOLD ON POST, TIN ON TAIL -L: SELECTIVE, .000010 GOLD ON POST, TIN ON TAIL .098 2.49 REF "A" .0120 0.305 REF .025 0.64 SQ REF C .230 5.84 (TYP) "F" REF .100 2.54 REF .0300 0.762 REF .0470 1.194 REF .012 0.305 REF T-1S58-01-X 2 MAX TOE (TYP) C SECTION "B"-"B" "C" SECTION "A"-"A" FIG 1 (PHT-1XX-01-X-S SHOWN) PHT-1XX-XX-X-X-XXX PACKAGING VIEW (SEE NOTE 5 & TABLE 3) NOTES: G 1. C REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM CUT FLASH: .020 [.51]. 3. MINIMUM CONTACT RETENTION: .5 LB PER PIN. 4. PARTS MAY BE CUT TO POS. 5. BULK PACKAGED TO BE USED FOR 4 POSITION AND BELOW. TUBE TO BE USED FOR 5 POSITION AND ABOVE. 50 POSITION STRIPS USED FOR STOCK ARE TO BE LAYER PACKAGED. 6. MAX ALLOWABLE BOW: .02 INCH/INCH FOR -01 STYLE, .005 INCH/INCH FOR -02, -03 -04 STYLES AFTER ASSEMBLY. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES[MILLIMETERS]. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 INSULATOR: LCP, UL 94 VO COLOR: BLACK CONTACT: PHOS BRONZE C:\EnterpriseVault\DWG\MISC\MKTG\PHT-1XX-XX-X-X-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DWG. NO. .100 PRESS FIT SOCKET ASSEMBLY PHT-1XX-XX-X-X-XXX BY: VICKY Z 09/08/2009 SHEET 1 OF 3 REVISION G "A".010[0.25] (SEE NOTE 2) C "B" "D" "C" "C" "D" SECTION "D"-"D" T-1S58-02-X .230 5.84 (TYP) C ASP-81370-01 C "F" REF "E" .100 2.54 REF .0300 0.762 REF "C" PHEF-XX-S-02 .098 2.49 REF "D".010[0.25] (SEE NOTE 2) SECTION "C"-"C" FIG 2 (PHT-1XX-02-X-S SHOWN) (SAME AS FIG 1, EXCEPT AS SHOWN) (FOR -02, -03 & -04 LEAD STYLE ONLY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 C:\EnterpriseVault\DWG\MISC\MKTG\PHT-1XX-XX-X-X-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DWG. NO. .100 PRESS FIT SOCKET ASSEMBLY PHT-1XX-XX-X-X-XXX BY: VICKY Z 09/08/2009 SHEET 2 OF 3 REVISION G "A".010[0.25] (SEE NOTE 2) .0475 1.207 REF "B" C "F" 02 "E" CL .1000 2.540 C FIG 3 01 "E" "F" ASP-81370-02 (PHT-1XX-01-X-D SHOWN) (SAME AS FIG 1, EXCEPT AS SHOWN) .198 5.03 REF .230 5.84 (TYP) C C "F" REF "F" REF .100 2.54 REF T-1S58-01-X C .1000.0050 2.5400.127 (TYP) C "C" -S ROW (FOR -02, -03 & -04 LEAD STYLE ONLY) SECTION "F"-"F" SECTION "E"-"E" "A".010[0.25] (SEE NOTE 2) IN-PROGRESS FIG 4 "H" (PHT-1XX-02-X-D SHOWN) (SAME AS FIG 3, EXCEPT AS SHOWN) (FOR -02, -03, & -04 LEAD STYLE ONLY) "G" C "F" REF "G" "H" T-1S58-02-X .230 5.84 (TYP) C ASP-81370-02 "F" REF "E" -D ROW (FOR -02, -03 & -04 LEAD STYLE ONLY) C PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 SECTION "G"-"G" IN-PROGRESS PHEF-XX-D-02 C "C" "D" (SEE NOTE 2) SECTION "H"-"H" C:\EnterpriseVault\DWG\MISC\MKTG\PHT-1XX-XX-X-X-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DWG. NO. .100 PRESS FIT SOCKET ASSEMBLY PHT-1XX-XX-X-X-XXX BY: VICKY Z 09/08/2009 SHEET 3 OF 3