05/18/2015Page1/6

Repeater power supply-MACX PL-EX-RPSSI-2I-SP-2904960

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

Ex i measuring transducer power supply and input signal conditioner, HART. Transfers supplied or active 4 - 20

mA electrically isolated signals from the Ex area to two loads in the safe area. 4-way electrical isolation, PLd,

push-in technology.

Packing unit 1 pc

Custom tariff number 85437090

Country of origin Germany

Technical data

Utilization restriction EMC: class A product, see manufacturer's declaration in the download

Width 12.5 mm

Height 99 mm

Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal

05/18/2015Page2/6

Repeater power supply-MACX PL-EX-RPSSI-2I-SP-2904960

Technical data

Ambient conditions

Degree of protection IP20

Input data

Signal input Repeater power supply operation

Current input signal 4 mA ... 20 mA

Transmitter supply voltage > 16 V (20mA)

> 15.1 V (23mA)

Load/output load current output < 450 Ω (20mA)

< 380 Ω (23mA)

Output ripple < 20 mVrms

Output behavior in the event of an error 0 mA (Cable break in the input)

≥ 23 mA (Cable short-circuit in the input)

Signal output Signal conditioner operation

Current output signal 4 mA ... 20 mA (active)

Load/output load current output < 450 Ω (20mA)

< 380 Ω (23mA)

Output ripple < 20 mVrms

Power consumption < 1.45 W (24 V DC/ 20 mA)

Connection data

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 1.5 mm²

Conductor cross section AWG min. 24

05/18/2015Page3/6

Repeater power supply-MACX PL-EX-RPSSI-2I-SP-2904960

Technical data

Connection data

Conductor cross section AWG max. 16

Stripping length 8 mm

Connection method Push-in connection

Maximum transmission error < 0.1 % (of final value)

Transmission error, typical < 0.05 % (of final value)

degree 2, safe isolation as per EN 61010-1))

2.5 kV (50 Hz, 1 min., test voltage)

Designation Input/output

Electrical isolation 375 V (Peak value in accordance with EN 60079-11)

Designation Input/power supply

Electrical isolation 375 V (Peak value in accordance with EN 60079-11)

Designation Output 1/output 2

Electrical isolation 1.5 kV AC (50 Hz, 1 min., test voltage)

Conformance CE-compliant, additionally EN 61326

ATEX  II (1) G [Ex ia Ga] IIC/IIB

Class I Div 2; IS for Class I, II, III Div 1

Data communication (bypass)

HART function Yes

Protocols supported HART

Safety data

05/18/2015Page4/6

Repeater power supply-MACX PL-EX-RPSSI-2I-SP-2904960

Technical data

Safety data

Operation Repeater power supply operation

Max. output voltage Uo25.2 V

Max. output current Io93 mA

Max. output power Po587 mW

Group IIC

Max. external inductivity Lo2 mH

Max. external capacity Co107 nF

Input current Ii≤ 150 mA

Max. internal inductance Linegligible

Max. internal capacitance Cinegligible

eCl@ss 4.0 27210120

eCl@ss 4.1 27210120

eCl@ss 5.0 27210120

eCl@ss 5.1 27210120

eCl@ss 6.0 27210120

ETIM 5.0 EC002653

UNSPSC 6.01 30211506

UNSPSC 7.0901 39121008

05/18/2015Page5/6

Repeater power supply-MACX PL-EX-RPSSI-2I-SP-2904960

UNSPSC 11 39121008

UNSPSC 12.01 39121008

UNSPSC 13.2 39121008

UL Listed / cUL Listed / GL / cULus Listed

Ex Approvals

IECEx / ATEX / UL Listed / cUL Listed / cULus Listed

05/18/2015Page6/6

Repeater power supply-MACX PL-EX-RPSSI-2I-SP-2904960

Block diagram