3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC
Physical
Electrical
Environmental
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Connector Contact Plating
Wiping Area: 30 µ″ [ 0.76 µm ] Min. Gold
Shell
Color: Parchment/Beige
Material: Acrylonitrile Butadiene Styrene (ABS)
Cable
Color: Parchment/Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: > 1 × 108Ω at 100 VDC
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10Ω (USB 90Ω)
Conductor Size: 28 AWG Stranded
Propogation Velocity: 1.25 ns/ft [4.1 ns/m ]
Temperature Rating: -20°C to +75°C
TS-0891-07
Sheet 1 of 3
Date Modified: October 11, 2005
• 10 shielded pairs plus 4 individual wires for
high bandwidth applications
• The solution for high speed datacom and
telecom applications
• Each differential pair is shielded with foil;
entire cable bundle is shielded with foil and
braid for additional signal protection
• Rugged MDR ribbon type contact
• Quick release latches
•RoHS* compliant
UL File No.: E86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC
TS-0891-07
Sheet 2 of 3
LENGTH
42.0
1.65
42.0
1.65
2X Squeeze Release
Latches
2X Squeeze Release
Latches
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
Cable
(See Wiring Diagram For Cable Construction)
Ordering Information
14526-EZHB-XXX-0QC
Length:
100 = meter
200 = 2 meter
500 = 5 meter
A00 = 10 meter
[Inch]
Tolerance Unless Noted
mm
mm
[ ] Dimensions for
Reference only
± .10
± .1
0.00
0.0
MDR 26 Position Plug
Both Ends
1234567 1213111089
19 20 21 22 23 24 25 2614 15 16 17 18
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC
Cable
Receiver, Rx
3M MDR SMT
Receptacle
Transmitter, Tx
3M MDR SMT
Receptacle
MDR 26 Position, Pinout D26-1, Rev A Pin One to One
1
USB+
5
A2P
22
A4M
14
USB-
2
USB gnd
15
A0M
3
A0P
16
A1M
4
A1P
17
A2M
18
CLK1M
6
CLK1P
19
DDC/USB pwr
7
DDC/SCL
20
DDC/SDA
8
DDC/USB gnd
21
A3M
9
A3P
10
A4P
23
A5M
11
A5P
24
A6M
12
A6P
25
A7M
13
A7P
26
LVDS Gnd
26
LVDS gnd
13
A7P
25
A7M
12
A6P
24
A6M
11
A5P
23
A5M
10
A4P
22
A4M
9
A3P
21
A3M
8
DDC/USB gnd
20
DDC/SDA
7
DDC/SCL
19
DDC/USB pwr
1
USB+
6
CLK1P
18
CLK1M
5
A2P
17
A2M
4
A1P
16
A1M
15
A0M
2
USB gnd
14
USB-
28 AWG insulated
conductor
Symbols Key:
3
A0P
100 Ohm balanced
individually shielded twisted
pair (USB pair 90 ohms).
Note:The shields of the 100 Ohm pairs are in commoned in the
cable and share a common drain wire, LVDS ground. TS-0891-07
Sheet 3 of 3
3
Printed in USA.
© 3M 2005
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/328-1368
www.3M.com/electronics
